Set Up; Position Tractor - Kubota RT120Q Operator's Manual

Backhoe - 120

Set Up

EMERGENCY SHUTDOWN - Turn ignition switch to STOP.
To help avoid injury: Use attachments or counterweights to make front and rear loads balance when all
attachments are raised. Contact your Ditch Witch
To help avoid injury: Comply with all utility notification regulations before digging or drilling.

Position Tractor

1. Fasten and adjust seat belt.
2. Start tractor. See page 84 for start-up procedures.
3. Drive to starting point. Move in line with planned job. See page 85 for driving procedures.
4. Ensure ground drive direction control is in neutral.
5. Move attachment speed/direction control to neutral position.
6. Move ground drive control to neutral position.
7. Set ground drive motor speed to low.
8. Lower rear attachment to 6" (150 mm) above ground.
9. Lower backfill blade, if equipped.
10. Turn ignition switch to STOP.
11. Move to backhoe operator's station.
Crushing weight could cause death or serious injury. Stay
away.
®
dealer about counterweighting for your equipment.
Jobsite hazards could cause death or serious injury. Use
correct equipment and work methods. Use and maintain proper safety
equipment.
Read operator's manual. Follow safety rules and know
how to use all controls. Your safety is at stake.
RT120Q Operator's Manual
273-475
Set Up