Table of Contents
Advertisement
3-POINT HITCH CONTROL SYSTEM
HYDRAULIC UNIT
3-POINT HITCH CONTROL
SYSTEM
1. Position control
This will control the working depth of 3-point hitch
mounted implement regardless of the amount of pull
required.
(1) Position control lever
IMPORTANT :
• If the 3-point hitch can not be raised by setting
the hydraulic control lever to the UP position
after long term storage or when changing the
transmission oil, turn steering wheel to the right
and left several times to bleed air from the
system.
• Do not operate until the engine is warmed up. If
operation is attempted when the engine is still
cold, the hydraulic system may be damaged.
• If noises are heard when implement is lifting
after the hydraulic control lever has been
activated, the hydraulic mechanism is not
adjusted properly. Unless corrected, the unit
will be damaged. Contact your KUBOTA Dealer
for adjustment.
2. 3-point hitch lowering speed
WARNING
To avoid personal injury or death:
• Fast lowering speed may cause damage or
injury. Lowering speed of implement should be
adjusted to 2 or more seconds.
B2401DT, B2401DTWO, B2401DTN
(A) Up
(B) Down
(C) Float
The lowering speed of the 3-point hitch can be
controlled by adjusting the 3-point hitch lowering speed
knob.
(1) 3-point hitch lowering speed
knob
AUXILIARY HYDRAULICS
[Without loader valve only]
Hydraulic outlet is provided on the tractor.
1. Hydraulic block type outlet
Hydraulic block type outlet is useful when adding
hydraulically operated equipment such as front end
loader, front blade, etc.
When an implement is attached:
1. Remove the block cover.
2. Attach the block outlet cover (option).
HYDRAULIC UNIT
(A) Fast
(B) Slow
(C) Lock
45
Advertisement
Table of Contents
