Kubota RT120Q Operator's Manual page 141

Saw - 140
Set Up
EMERGENCY SHUTDOWN - Turn ignition switch to STOP.
To help avoid injury: Use attachments or counterweights to make front and rear loads balance when all
attachments are raised. Contact your Ditch Witch
To help avoid injury: Comply with all utility notification regulations before digging or drilling.
1. Fasten and adjust seat belt.
2. Start tractor. See page 84 for start-up procedures.
3. Drive to starting point. Move in line with planned job. See page 85 for correct driving procedures.
4. Set parking brake and verify parking brake indicator is on.
5. Move ground drive control to low.
6. Tilt steering wheel column up.
7. Turn seat to desired position.
8. Engage axle lock.
9. Lower saw to just above ground.
Crushing weight could cause death or serious injury. Stay
away.
®
dealer about counterweighting for your equipment.
Jobsite hazards could cause death or serious injury. Use
correct equipment and work methods. Use and maintain proper safety
equipment.
Read operator's manual. Follow safety rules and know
how to use all controls. Your safety is at stake.
RT120Q Operator's Manual
273-475
Set Up