Prepare Tractor - Kubota RT120Q Operator's Manual

Plow - 110
Feed Product
NOTICE: Use only genuine Ditch Witch
cable guide.
1. Remove cable guide.
2. Feed cable through tube from top to
bottom.
3. Replace cable guide and tighten
fasteners.
4. Secure cable.

Prepare Tractor

1. Fasten and adjust seat belt.
2. Start tractor.
3. Adjust to low throttle.
4. Move ground drive control to low.
5. Lower reel carrier to lowest position possible, if equipped.
NOTICE: Use extreme caution when operating reel carrier on sloped surfaces.
6. Raise backfill blade, if equipped.
7. Tilt steering wheel column up.
8. Turn seat to the desired position.
9. Engage axle lock.
®
RT120Q Operator's Manual
Set Up