Kubota RT120Q Operator's Manual page 181

Service - 180
Change Hydraulic Fluid and Filter
Change hydraulic fluid and filter every 500 hours.
Change hydraulic fluid and filter every 250 hours if
jobsite temperature exceeds 100°F (38°C) more
than 50% of the time.
To change:
1. Remove drain plug (1).
2. Drain fluid and replace plug.
3. Change filter (2).
4. Add THF at fill (3).
Test Coolant Freeze Protection Level
With engine cool, test coolant freeze protection
level using a hydrometer or refractometer.
Recommended freeze protection level is -34°F
(-37°C). Adjust as needed.
If colder temperatures are expected, consult your
®
Ditch Witch dealer or coolant supplier.
IMPORTANT: See page 158 for information on
approved coolants.
Use pre-dilluted coolant to maintain proper freeze
protection.
RT120Q Operator's Manual
2
1
t37om031w.eps
t37om019w.eps
500 Hour
3