Kubota RT120Q Operator's Manual page 107

Trench - 106
11. Operate engine at full throttle when working.
NOTICE:
• Do not make sharp turns. Lower boom to full depth when turning.
• If an object becomes lodged in chain, move attachment speed/direction control to neutral
and raise boom slightly. Reverse chain direction. If object must be removed manually, turn
engine off and set parking brake.
Finish Job
1. When trench is complete, move ground drive hand control to neutral.
2. Adjust throttle to low.
3. Raise boom.
4. As boom clears top of trench, move attachment speed/direction control to neutral.
5. If equipped with traversing trencher, return to center position.
6. Raise trench cleaner, if equipped.
7. Return seat to the drive position.
8. Tilt steering wheel column down.
9. Disengage axle lock. After disengaging axle lock, drive tractor in reverse 6' (2 m) to fully disengage.
10. Drive a short distance away from work site. See page 85 for driving procedures.
11. Shut down tractor. See page 87 for proper shutdown procedures.
12. Stow trench cleaner.
RT120Q Operator's Manual
Finish Job