Physical Description; Reviewing The Base Unit Front Panel Design; Front Panel Leds; Figure 1. Netvanta 4305 Front Panel Layout - ADTRAN NetVanta 4305 Hardware Installation Manual

NetVanta 4305 Hardware Installation Guide
2.

PHYSICAL DESCRIPTION

Reviewing the Base Unit Front Panel Design

Figure 1 shows the NetVanta 4305 front panel.
NET 1
WAN TD
STATUS DBU RD

Front Panel LEDs

Table 1 describes the front panel LEDs.
LED
STATUS
Green (flashing)
Green (solid)
Red (solid)
NET 1/NET 2
Off
WAN
Green (solid)
Red (solid)
Yellow (solid)
NET 1/NET 2
Off
DBU
Green (solid)
Green (flashing)
Red (solid)
Yellow (solid)
NET 1/NET 2
Green (flashing)
TD/RD
Off
LAN 1/LAN 2
Green (flashing)
TD/RD
Off
61200890L1-34H
LAN 1 LAN 2 WIDE SLOT 1
NET 2
TD TD
WAN TD RD RD
DBU RD LNK LNK

Figure 1. NetVanta 4305 Front Panel Layout

Table 1. NetVanta 4305 LEDs

Color
Unit is powering up. On power-up the STAT LED flashes rapidly
for five seconds, during which time the user may escape to boot
mode from the console port.
Power is on and self-test passed.
Power is on, but the self-test failed or the boot mode (if
applicable) code could not be booted.
No NIM is installed or interface is administratively down.
Link is up and everything is operational.
An alarm condition is occurring on the WAN interface, or there is
a self-test failure.
The unit is in test.
No DIM is installed.
DIM is ready. For the ISDN BRI DIM, green solid indicates that
the negotiation with the switch is complete.
Unit is in dial backup.
An alarm condition is occurring on the DBU interface, or there is
a self-test failure.
Unit is in test.
There is activity on the WAN or DBU port.
There is no activity on the WAN or DBU port.
There is activity on the Ethernet port.
There is no activity on the Ethernet port.
Copyright © 2006 ADTRAN, Inc.
STATUS
ACTIVITY
TEST
Indication
Physical Description
NetVanta 4305
21