Mounting Options; Rack Mounting Netvanta 4305 - ADTRAN NetVanta 4305 Hardware Installation Manual

Adtran netvanta 4305: install guide

Hide thumbs Also See for NetVanta 4305:

Table of Contents

Unit Installation

Mounting Options

If you have purchased the VPN accelerator card, install it first. See Installing the

NetVanta VPN Accelerator Card (P/N 1202368L1) on page 47.

The NetVanta 4305 may be installed in a tabletop, wallmount, or 19-inch rackmount configuration. The

following sections provide step-by-step instructions for rack mounting and wall mounting.

The NetVanta 4305 is housed in a 1U-high, rack-mountable chassis which can be installed into 19-inch

equipment racks. Follow these steps to mount the NetVanta 4305 in a rack:

Step

Position the NetVanta 4305 in a stationary equipment rack. This unit occupies 1U of space. To

allow proper grounding, scrape the paint from the rack around the mounting holes where the

NetVanta 4305 will be positioned.

Have an assistant hold the unit in position as you install two mounting bolts through the unit's

brackets and into the equipment rack using a #2 phillips-head screwdriver.

Proceed to the steps given in Supplying Power to the Unit on page 44.

Be careful not to compromise the stability of the equipment mounting rack when installing

this product.

Instructions for Rack Mounting NetVanta

NetVanta 4305 Hardware Installation Guide

Action

61200890L1-34H

Table of Contents