Table of Contents
Advertisement
Chapter 9 Maintenance and Service
9.
Maintenance and Service
Safety instructions
Version: 12.05.14
Hazard from direct or indirect contact with voltage-
conducting parts.
DANGER TO LIFE!
Contact of persons with parts that became live by faults.
- Before performing any work at the labeling station, disconnect it
from electrical power.
Danger to health from the improper use of lubricants and
cleaners.
HEALTH HAZARD!
Improper handling may lead to health hazards.
- For used lubricants and detergents, the valid information of the
safety data sheets of the manufacturers and the valid safety-
and disposal regulations have to be observed and followed for
each product
Damages to machines and machine parts.
Absence or faulty maintenance, service and repair work abate the
operational availability of the machine. This can result in
consequential damages and exclusion of warranty claims.
Machine functions should be monitored continuously.
Exceptional noise developments or unusual movements (e.g.
jerking, hammering etc.) are signs of malfunction and need to be
checked.
- All identified defects are promptly and professionally to remove.
- The operation of the machine is specifically prohibited in case
of defects at safety equipment until proper recovery.
- Maintenance and repair may only be performed by qualified
personnel. Only cleaning work may be performed by the
operator (Authorized persons s. page 17).
Page 42 of 56
40001684 Geset 111
GB
Advertisement
Table of Contents
