Advertisement
B-2
A
B: S
PPENDIX
TARTUP
M
ESSAGES
Auxiliary Processor Board - Installed.
Meaning:
The server has detected the presence of the auxiliary processor
board and started self-tests on it.
Booting complete
Meaning:
The boot sequence is complete.
Booting from <source>
Meaning:
The server is booting from the source specified by the Initial
Boot Source parameter. <source> indicates either floppy or
network. For information on this parameter, refer to "Initial Boot
Source".
CPU - 4 Megs Private RAM, 2 Megs Shared RAM - Passed N4 MMON rev.
<xxx>
Meaning:
No errors were encountered in CPU self-tests. The server's
firmware revision is <xxx>.
CS/3000 Series Power-up
Meaning:
The motherboard's CPU self-tests have begun.
Diagnostic Upload - Completed
Meaning:
The auxiliary processor board's diagnostics have been copied to
RAM and self-tests are ready to begin.
Do you want to enter monitor (Y/N)?
Meaning:
The server cannot find the boot source specified by the Initial
Boot Source parameter. For information on this parameter,
refer to "Initial Boot Source".
Action:
Enter
to enter the monitor utility and boot manually. Enter
Y
to retry the original boot source.
Ethernet Controller - Passed Station Address - 080002<xxxxxx>
Meaning:
No errors were encountered in Ethernet controller tests. The
server's Ethernet address is 080002<xxxxxx>.
Floppy disk drive not installed!
Meaning:
This message appears during startup of Model CS/3000
(without a diskette drive). It does not appear during startup of
Model CS/3100 (with a diskette drive).
N
Advertisement
