Advertisement
FC
Syntax
FC
Enters the Firmware Configuration Utility menu. For information on using
Description
this menu, refer to Chapter 4, "Configuration."
FO
Syntax
FO
Formats a diskette (Model CS/3100 only). For a description of the procedure,
Description
refer to "Formatting Diskettes without the Copy Command".
H or ?
Syntax
H
?
Displays a list of commands and their syntax. Commands in the list that are
Description
not documented in this guide are for 3Com internal use only.
K
Syntax
K
Resets the monitor's stack and internal variables (called a soft reset). It also
Description
resets the Ethernet and serial controllers.
RS
Syntax
RS
Resets the server; has the same effect as pressing the reset switch or
Description
powering the server off and on. During reset, the server performs the
self-tests and boot process determined by the Continuous Self-Test and
Initial Boot Source parameters.
Using Commands
C-7
Advertisement
