Advertisement
5-6
C
5: M
HAPTER
Upgrades
U
AINTENANCE AND
PGRADES
c Continue to slide the module into the slot until you feel a slight
resistance.
This resistance is caused by the connector on the board engaging the
connector on the motherboard.
6 Fasten the module into the chassis with the two screws.
7 Recable the module.
For instructions on cabling the Ethernet interface modules, refer to "Cabling
Ethernet Interface Modules".
Upgrade procedures require you to remove the server cover.
CAUTION: Procedures that involve removing the power supply cover must be
performed by service personnel only.
"Service personnel" means people who have appropriate technical training
and experience. Service personnel are aware of hazards they are exposed to
and of methods to minimize the danger to themselves and others.
Follow the instructions in this section carefully. If any problems occur,
contact 3Com or your authorized service representative immediately.
If the information in release notes shipped with an upgrade kit differs from
the information in this guide, follow the release notes.
WARNING: Do not open the power supply. It contains hazardous voltages.
There are no user-serviceable parts inside.
VORSICHT: Öffnen Sie niemals das Netzteil. Hochspannung! Es sind keine zu
wartenden Teile enthalten.
AVERTISSEMENT: Ne pas ouvrir le bloc d'alimentation. Tensions
dangereuses à l'intérieur. Ne contient aucune piece que l'utilisateur puisse
réparer.
PELIGRO: No abra fuente de alimentacion. Contiene alta tensión. No hay
partes para reemplazar adentro.
Advertisement
