3Com CS/3000-48 Installation Manual page 36

2-16 C 2: I
HAPTER NSTALLATION
Table 2-3 3Com AUI Cables (continued)
Length Type
30 ft (9 m) Standard
50 ft (15 m) Standard
75 ft (23 m) Standard
100 ft (30 m) Standard
150 ft (46 m) Standard
6 ft (2 m) PVC
16 ft (5 m) PVC
32 ft (10 m) PVC
49 ft (15 m) PVC
Teflon ®
15 ft (4.6 m)
30 ft (9 m) Teflon
50 ft (15 m) Teflon
75 ft (23 m) Teflon
15 ft (4.6 m) Positive attachment
30 ft (9 m) Positive attachment
50 ft (15 m) Positive attachment
75 ft (23 m) Positive attachment
To connect the AUI port to a thick or thin coaxial, twisted-pair, or fiber-optic
network using a transceiver, fanout box, or hub, follow these steps:
1 Install the external transceiver, fanout box, or hub on the network.
Refer to the instructions that came with your transceiver, fanout box, or hub.
2 Connect one end of the AUI cable to the AUI port and the other end to the
transceiver, fanout box, or hub.
CAUTION: To eliminate cable noise emission in excess of FCC Part 15 Subpart
J, or CISPR22 (EN55022) for Class A devices, all cables should be
triple-shielded (Inmac 536888 or equivalent) and have connectors with
metallic backshells. Cable shields should be connected to backshells.
3 Slide the latch on the AUI port into the closed position, as shown:
Part Number
3C6194
3C6195
3C6196
3C6197
3C6198
3C110-002
3C110-005
3C110- 010
3C110- 015
3C6156
3C6157
3C6158
3C6159
3C6139
3C6140
3C6141
3C6142