Advertisement
C-6
A
C: M
PPENDIX
ONITOR
Syntax
Description
Syntax
Description
Syntax
Description
Syntax
Description
U
TILITY
The <filenumber> parameter specifies a bootfile on the diskette (Model
CS/3100 only). Valid entries are 0 through 9. For example, enter
boot from file 2 on the diskette.
The <filename> and <address> parameters specify the name of the bootfile
and the location in memory where it should be loaded. For example, enter
bt _cs30 0x4000010
location 0x4000010.
If you do not specify a parameter, the server attempts to boot from file 0 on
the diskette.
CO
CO
Copies the contents of a diskette to one or more diskettes (Model CS/3100
only). For a description of the procedure, refer to "Copying and Formatting
Diskettes".
DE
DE <filenumber>
Deletes the specified file from the diskette (Model CS/3100 only). Valid
entries are 0 through 9. For example, enter
diskette.
DF
DF
Lists files on the diskette (Model CS/3100 only), including start and end
blocks, length of the file, and starting address.
DU
DU
Dumps the server's memory to a set of diskettes (Model CS/3100 only). For
information about memory dumps, refer to "Memory Dump Procedures".
to load and run the file _cs30 from memory
de 2
to
bt 2
to delete file 2 from the
Advertisement
