Advertisement
Cabling Ethernet
Interface Modules
Cabling a
Single-Port AUI
Module
Figure 2-11 Installing Cable Strain Relief
Procedures for cabling the two types of modules differ and are described in
separate sections.
To perform this installation, you need either an external transceiver, a fanout
box (repeater), or a hub, and an AUI cable no longer than 150 ft (46 m).
You must provide your own transceiver, fanout box, or hub. You can buy the
cables shown in Table 2-3 from 3Com or your network supplier. For AUI pin
assignments, refer to "AUI Port".
Table 2-3 3Com AUI Cables
Length
Type
15 ft (4.6 m)
Standard
Cabling Ethernet Interface Modules
Strain relief
bracket
Part Number
3C6193
2-15
Advertisement
