Table of Contents
Advertisement
Safety rules
2.2
Transport plug
NOTE.
When the lift is installed, the transport plug in the
hydraulic unit must be removed and replaced with
the normal tank cap supplied with the hydraulic
unit.
2.3
Moving parts - free movement
WARNING!
When the final inspection* takes place, the
space occupied by the moving cylinders must
be cleared and made safe. There is a risk of
collision between the cylinder and the following
items: subframe, truck chassis, beam for rear light
(number plate) and the chassis bracket of the lift
(with a short overhang).
*The final inspection must be carried out with the
platform at the vehicle floor and tilted down 10°.
The clearance from the closest part of the cylinder
must be at least 40 mm.
WARNING!
The platform must not be tilted down more than
max. 10° from horizontal when people are on the
platform.
www.zepro.com
54853
Image 4. Replace the transport
plug with the normal tank cap
Image 5. Clearance to the closest part of
the cylinder must be at least 40 mm
Image 6. The platform must not be tilted
down more than 10° from the horizontal
Z 10/15/20
10º
10º
9
Hide quick links:
Advertisement
Table of Contents
