Level Bed; Disable Steppers - Bresser RAPTOR Instruction Manual

Level Bed

IMPORTANT! Ensure that the Magnetic Print Mat is installed on the Print Bed before
performing the Level Bed procedure. Performing a Level Bed function without the
Magnetic Print Mat will produce an invalid result.
① On the Main Menu, rotate the Knob until the Prepare option is highlighted, then
② Rotate the Knob until the Level Bed option is highlighted, then press the Knob to
press the Knob to enter the Prepare Menu.
begin the Level Bed procedure.

Disable Steppers

① On the Main Menu, rotate the Knob until the Prepare option is highlighted, then
② Rotate the Knob until the Disable Steppers option is highlighted, then press the
press the Knob to enter the Prepare Menu.
Knob to disable the Stepper Motors. The X, Y, and Z axes can now be independently
moved by hand. To re-enable the Stepper Motors, turn the printer off, then turn it
back on.
www.bresser.de
27