Move Axis - Bresser RAPTOR Instruction Manual

Move Axis

① Perform the steps in the Auto Home section above.
② On the Main Menu, rotate the Knob until the Prepare option is highlighted, then
③ Rotate the Knob until the Move Axis option is highlighted, then press the Knob to
press the Knob to enter the Prepare Menu.
④ Rotate the Knob until the Move X, Move Y, Move Z, or Extruder option is
enter the Move Axis Menu.
highlighted, then press the Knob to enter the Move X, Move Y, Move Z, or Move
⑤ Rotate the Knob until the Move 10mm, Move 1mm, or Move 0.1mm option is
Extruder Menu.
highlighted, then press the Knob to move the selected axis by the indicated amount.
www.bresser.de
26