Power Loss Recovery Menu; Common Menu Operations; Print From Sd - Bresser RAPTOR Instruction Manual

2.2.2.9 Power Loss Recovery Menu

If power is lost during printing or if you previously selected the
Saving Print and Off function from the Print Control Menu, the next
time to turn the printer on, the Power Loss Recovery Menu is
displayed, which allows you to continue the print from where it left
off.
- Resume Print: Resumes the saved print.
- Stop Print: Cancels the saved print.

2.2.3 Common menu operations

Print from SD

① Do On the Main Menu, rotate the Knob until the Print From SD option is
② The File Selection screen shows all the .gcode files on the microSD™ card,
highlighted, then press the Knob to enter the File Selection screen.
sorted with the newest file at the top. Rotate the Knob to highlight the file you
want to print, then press the Knob to start printing the file.
Note that files stored on the microSD card are limited to 20 characters, not counting
the .gcode file extension.
www.bresser.de
23