Saving A Print; Continuing A Print After Power Loss - Bresser RAPTOR Instruction Manual

Saving a Print

The printer features the ability save a print in progress, so that you can turn the printer
off and resume printing at a later time. Perform the following steps to save and
① With the Printing... Screen displayed, press the Knob to display the Print Control
resume a print in progress.
② Rotate the Knob until the Save Printing and Off option is highlighted, then press
Menu.
③ Wait for printing to stop, then turn the printer off.
the Knob to save the print.
④ When you are ready to continue the print, turn the printer on. The Power Loss
⑤ Rotate the Knob until the Resume Print option is highlighted, then press the Knob
Recovery Menu will display.
to continue the print. The printer will heat the Nozzle to the target temperature,
then will resume the print.

Continuing a Print After Power Loss

In the event that power is lost for any reason, the printer will remember where it was in
the print process when power was lost. Perform the following steps to continue the
① Turn the printer on. The Power Loss Recovery Menu will display.
interrupted print.
② Rotate the Knob until the Resume Print option is highlighted, then press the Knob
to continue the print. The printer will heat the Nozzle to the target temperature,
then will resume printing
www.bresser.de
36