General Information
Important notes
- Please read this manual carefully before using the machine.
- This manual assumes that you are using the Windows 7 operating system to
operate the 3D Printer.
- The latest version of the REXprint software is used.
This manual contains all the information required for setting up and operating the
machine.
The User's Guide consists of the following parts: Introduction, General and Safety
Information, Operation and Product Service.
Please be prepared for service requests:
Art. No.:
Product name:
Instruction manual:
Printer_Raptor_de_BRESSER_v012021a.docx
www.bresser.de
2010400
BRESSER RAPTOR WLAN 3D printer
Manual_2010400_Wifi-3D-
4