Canceling A Print In Progress; Printing With The App - Bresser RAPTOR Instruction Manual

Canceling a Print in Progress

① With the Printing... Screen displayed, press the Knob to display the Print Control
② Rotate the Knob until the Stop Print option is highlighted, then press the Knob to
Menu.
cancel the print.
① Launch the PoloPrint app. The app will list models on the cloud. Each model's "card"

Printing with the App

shows the approximate amount of time it will take to print. To print a model, touch
the model's "card", then touch the icon that appears in the lower right corner of the
"card". The app will download the model file from the cloud. When the download is
finished, it will start printing automatically.
② If you want to view the files on the microSD™ card, touch the SD FILES tab at the
top of the screen. The app will display the files on the microSD card. To print a file,
touch the "card", then touch the icon in the bottom right corner of the "card".
www.bresser.de
37