Basic Menu Control; Osd Menu System; Welcome/Info Screen; Main Menu - Bresser RAPTOR Instruction Manual

2.2.1 Basic menu control

- Rotate the Knob clockwise to move the highlight down on the menus or to
decrease a value
- Rotate the Knob counterclockwise to move the highlight up on the menus or to
increase a value.
- Press the Knob to enter the highlighted menu, select the highlighted option, or
accept the edited value.

2.2.2 OSD menu system

Welcome/Info Screen

- After the printer starts up, the Welcome/Info Screen is displayed. Press the Knob to
continue to the Main Menu.

Main Menu

- Info Screen: Displays the Welcome/Info Screen.
- Prepare: Displays the Prepare Menu.
- Control: Displays the Control Menu.
- Print From SD: Displays the File Selection Screen.
Prepare Menu
- Main: Returns to the Main Menu.
- Auto Feed Filament: Starts the Loading Filament process.
- Auto Retract Filament: Starts the Unloading Filament process.
- Move Axis: Displays the Move Axis Menu.
- Auto Home: Moves the Extruder and the X, Y, and Z axes to
their "home" positions.
- Level Bed: Levels the Print Bed.
- Disable Steppers: Disables the Stepper Motors. To re- engage
the motors, turn the printer off, then back on again.
- Wizard: Starts the Initial Setup Wizard.
www.bresser.de
20