① Do not leave the machine unattended for long periods of time.
Precautions
② Do not make any changes to the unit.
③ Lower the pressure plate before inserting/removing filament. (The distance
④ Operate the unit in a well ventilated environment.
between nozzle and pressure plate should be at least 50 mm).
⑤ Do not use the machine for unlawful purposes.
⑥ Do not use the machine to make containers for storing food.
⑦ Do not use the device to manufacture electrical equipment.
⑧ Do not put models in the mouth.
⑨ Do not remove the models with force.
⑩ Do not connect the machine with a network cable longer than 3 m.
Environmental conditions
Temperature: Room temperature 15-30℃
Humidity: 20 %-70
Filament specifications
Use filament only for the intended purpose! Use only the BRESSER filament or
filament of the brands recognised by BRESSER!
Filament storage
A certain degree of decay can be observed in all polymers over time. Only unpack
the filament when you need it. The filament should be stored in a clean and dry
environment and protected from sunlight.
Legal notice
All information in this document can be extended or adapted without prior notice.
BRESSER GMBH MAKES NO WARRANTIES WITH RESPECT TO THIS
DOCUMENT, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
www.bresser.de
6