Wiibuilder Slicing Software; Installation - Bresser RAPTOR Instruction Manual

3.2 WiiBuilder Slicing Software

Installation

This printer includes a copy of WiiBuilder Slicing Software to turn 3D models into .gcode
files for printing from the microSD™ card. The software on the included microSD card
has been configured for use with the printer.
To install the software, double click the Wiibuilder2.0.6.3_WEEDO_setup.exe
① The installation wizard will first prompt you to select the
installation file on the microSD card, then follow the steps below.
installer language. The available languages are English,
Japanese, and Simplified Chinese. Select your preferred
② The installer will then prompt you to select the directory to
language and click the OK button to continue.
which WiiBuilder will be installed. If you do not want to use the default directory,
click the Browse... button to open the file browser and select your preferred
directory. Click the Next > button to continue.
③ The installer will prompt you to select the components you want to install. If you are
unsure of which components you need, select all components. Click the Install
button to start the installation process. If you already have a component installed,
the installer will inform you and skip installation of that component.
www.bresser.de
39