Control Menu; Wi-Fi Network Menu; Move X/Y/Z/Extruder Menu - Bresser RAPTOR Instruction Manual

Control Menu

- Main: Returns to the Main Menu.
- Temperature: Displays the Adjust Temperature Screen.
- Z Offset Setting: Tests the current distance between the Nozzle
and the Print Bed, then displays the Adjust Z Offset Screen.
- Wi-Fi Network: Displays the Wi®-Fi Network Menu.
- Language: Displays the Language Select Screen. The available
languages are English, Chinese, French, German, Spanish,
Italian, Japanese, Portuguese, Dutch, Turkish, and Korean.
- Machine Info: Displays the Machine Info Screen.
- Restore Default: Restores the printer's settings to their factory
default values. Normally, this will not be needed, but should be
done after performing a firmware update.

Wi-Fi Network Menu

- Control: Returns to the Control Menu.
- Show IP: Displays the IP address.
- Wi-Fi Device Info: Displays the Wi-Fi® module name, Wi-Fi
module firmware version number, and IP address.
- Connect to Wi-Fi: Displays the Connect to Wi-Fi Screen.
- Wi-Fi OTA Update: Checks the internet for the existence of a
firmware update and performs the update if one is found.

Move X/Y/Z/Extruder Menu

- Move Axis: Returns to the Move Axis Menu.
- Move 10mm: Displays the Move Screen, which allows you to
adjust the X/Y/Z/Extruder position by 10mm each time the Knob
is turned.
- Move 1mm: Displays the Move Screen, which allows you to
adjust the X/Y/Z/Extruder position by 1mm each time the Knob is
turned.
- Move 0.1mm: Displays the Move Screen, which allows you to adjust the
X/Y/Z/Extruder position by 0.1mm each time the Knob is turned.
www.bresser.de
21