Unloading Filament; Auto Home - Bresser RAPTOR Instruction Manual

Unloading Filament

On the Main Menu, rotate the Knob until the Auto Retract Filament option is
highlighted, then press the Knob. The Nozzle will heat to the target temperature. Once
the target temperature is reached, the Extruder motor will retract the existing filament.
① Perform the steps in the Unloading Filament section above.
Changing Filament
② Remove the filament spool from the Filament Holder, then place the new spool on
③ Perform the steps in the Loading Filament section above.
the Filament Holder.

Auto Home

The Auto Home function moves the Nozzle and Print Bed to the "home" positions.
① On the Main Menu, rotate the Knob until the Prepare option is highlighted, then
② Rotate the Knob until the Auto Home option is highlighted, then press the Knob. The
press the Knob to enter the Prepare Menu.
Nozzle and Print Bed will move to the "home" positions.
www.bresser.de
25