How To Raise The Cargo Bed; Raising And Lowering The Cargo Bed; Jack-Up Point; Front End - Kubota SIDEKICK RTV-XG850 Operator's Manual

PERIODIC SERVICE
HOW TO RAISE THE CARGO
BED
WARNING
To avoid serious injury or death:
• When servicing under raised bed, make sure
safety support is properly mounted.
• Do not touch muffler or exhaust pipes while
they are hot; Severe burns could result.
1. Raising and lowering the cargo
bed
See Raising and lowering the cargo bed on page 45.

JACK-UP POINT

WARNING
To avoid serious injury, death or vehicle damage:
• Do not work under the vehicle unless it is
secured by safe stands or suitable blocking.

1. Front end

Jack up at the plate under the front axle case only.
NOTE :
• Before jacking up the vehicle, park it on a firm
and level ground and chock the rear wheels.
• Select a jack that withstands the vehicle weight
and set it up as shown below.
56

HOW TO RAISE THE CARGO BED

(1) Plate under the front axle case
(2) Jack
(3) Wooden block

2. Rear end

Jack up the rear end after placing a wooden block
under the bottom plate of the transmission frame.
NOTE :
• Before jacking up the vehicle, park it on a firm
and level ground and chock the front wheels.
• Select a jack that withstands the vehicle weight
and set it up as shown below.
RTV-XG850