Table of Contents
Advertisement
■
The initialization operation
●
Make sure to carry out initialization after adjusting the tire inflation pressure.
Also, make sure the tires are cold before carrying out initialization or tire
inflation pressure adjustment.
●
If you have accidentally turned the power switch off during initialization, it is
not necessary to restart the initialization again as initialization will restart
automatically when the power switch has been turned to ON mode for the
next time.
●
If you accidentally start the initialization when initialization is not necessary,
adjust the tire inflation pressure to the specified level when the tires are
cold, and conduct initialization again.
■
Warning performance of the tire pressure warning system
The warning of the tire pressure warning system will change in accordance
with the conditions under which it was initialized. For this reason, the system
may give a warning even if the tire pressure does not reach a low enough
level, or if the pressure is higher than the pressure that was adjusted to when
the system was initialized.
■
When initialization of the tire pressure warning system has failed
Initialization can be completed in a few minutes. However, in the following
cases, the settings have not been recorded and the system will not operate
properly. If repeated attempts to record tire inflation pressure settings are
unsuccessful, have the vehicle inspected by your Toyota dealer.
●
When operating the initialization of the system, the tire pressure warning
light does not blink 3 times and the setting message does not appear on the
multi-information display.
●
After driving for a certain period of time since the initialization has been
completed, the warning light comes on after blinking for 1 minute.
■
Registering ID codes (for vehicles sold in Argentina, Peru, Mauritius,
Seychelles, Morocco, Hong Kong, Macao)
The ID codes of the tire pressure warning valve and transmitters for two sets
of wheels can be registered.
It is not necessary to register the ID codes when replacing normal tires with
snow tires, if the ID codes for the wheels of both normal tires and snow tires
are registered beforehand.
For information about changing ID codes, ask your Toyota dealer.
C-HR_HV_OM_General_OM10653E
7-3. Do-it-yourself maintenance
441
7
Advertisement
Table of Contents
