Page 1: Specifications
Pictorial index Search by illustration For safety Make sure to read through them and security Instrument How to read the gauges and meters, the variety of cluster warning lights and indicators, etc. Operation of Opening and closing the doors and windows, each component adjustment before driving, etc.
Page 2: Table Of Contents
TABLE OF CONTENTS Instrument cluster For your information .......8 Reading this manual.....12 How to search ......13 Instrument cluster Pictorial index .......14 Warning lights and indicators......108 For safety and security Gauges and meters... 119 Multi-information display (with monochrome 1-1. For safe use display)......
Page 3: Table Of Contents
Operation of each Driving component 3-1. Key information 4-1. Before driving Keys........144 Driving the vehicle..... 208 Cargo and luggage.... 222 3-2. Opening, closing and locking the doors Trailer towing..... 223 Side doors......155 4-2. Driving procedures Back door......165 Engine (ignition) switch Smart entry &...
Page 4: Table Of Contents
TABLE OF CONTENTS 4-5. Using the driving Audio system support systems Toyota Safety Sense ..290 PCS (Pre-Collision 5-1. Basic Operations System) ......298 Audio system types ... 478 LDA (Lane Departure Steering wheel audio Alert with steering switches ......480 control)......315 AUX port/USB port ....
Page 5: Table Of Contents
® 5-6. Using Bluetooth Interior features devices ® Bluetooth audio/phone..523 Using the steering 6-1. Using the air conditioning wheel switches ....530 system and defogger ® Registering a Bluetooth Manual air device ......531 conditioning system ..560 5-7. “SETUP” menu Automatic air Using the “SETUP”...
Page 6: Table Of Contents
TABLE OF CONTENTS Maintenance and care When trouble arises 7-1. Maintenance and care 8-1. Essential information Cleaning and protecting Emergency flashers ..680 the vehicle exterior ..600 If your vehicle has Cleaning and protecting to be stopped the vehicle interior ...605 in an emergency .....
Page 7: Table Of Contents
“Navigation and multimedia system Owner’s manual” for information regarding the equipment listed below. • Navigation system • Rear view monitor system • Hands-free system • Audio system (for cellular phone) Toyota Motor Europe NV/SA, Avenue du Bourget 60 - 1140 Brussels, Belgium www.toyota-europe.com C-HR_OM_Europe_OM10528E...
Page 8 Accessories, spare parts and modification of your Toyota Both genuine Toyota and a wide variety of other spare parts and accessories for Toyota vehicles are currently available on the market. Should it be deter-...
Page 9 SRS airbag system ● Seat belt pretensioner system Be sure to check with any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer for precautionary measures or special instructions regarding installation of an RF-transmitter system. Further information regarding frequency bands, power levels, antenna posi-...
Page 10 Scrapping of your Toyota The SRS airbag and seat belt pretensioner devices in your Toyota contain explosive chemicals. If the vehicle is scrapped with the airbags and seat belt pretensioners left as they are, this may cause an accident such as fire. Be...
Page 11 WARNING ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ- ence of alcohol or drugs that have impaired your ability to operate your vehi- cle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury.
Page 12: Reading This Manual
Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. 1 2 3 Indicates operating or working procedures.
Page 13 How to search Searching by name ■ • Alphabetical index ..P. 797 Searching installation ■ position • Pictorial index....P. 14 Searching by symptom or ■ sound • What to do if... (Troubleshooting) ..P. 792 Searching by title ■...
Page 14 Pictorial index Pictorial index ■ Exterior Doors ......... . . P. 155 Locking/unlocking .
Page 15 Pictorial index Windshield wipers ....... . . P. 278 Precautions for winter ....... P. 470 To prevent freezing (windshield wiper de-icer ).
Page 16 Pictorial index ■ Instrument panel (left-hand drive vehicles) Engine switch ....... . P. 233, 236 Starting the engine/changing the positions .
Page 17: Audio System
Pictorial index Multi-information display ..... . . P. 124, 128 If a warning message or indicator is displayed ... . P. 704 Turn signal lever .
Page 18 Pictorial index ■ Switches (left-hand drive vehicles) C-HR_OM_Europe_OM10528E...
Page 19 Pictorial index Manual headlight leveling dial ..... P. 267 Automatic High Beam switch ..... . P. 271 S-IPA (Simple Intelligent Parking Assist System) switch .
Page 20 Pictorial index Type A  Type B  C-HR_OM_Europe_OM10528E...
Page 21 Pictorial index Meter control switches ......P. 124, 129 Vehicle-to-vehicle distance switch ....P. 336, 351 Speed limiter switch .
Page 22 Pictorial index ■ Interior (left-hand drive vehicles) SRS airbags ........P. 43 Floor mats .
Page 23 Pictorial index Interior lights /personal lights ....P. 581 Vanity lights ........P. 595 Assist grips .
Page 24 Pictorial index ■ Instrument panel (right-hand drive vehicles) Engine switch ....... . P. 233, 236 Starting the engine/changing the positions .
Page 25 Pictorial index Multi-information display ..... . . P. 124, 128 If a warning message or indicator is displayed ... . P. 704 Turn signal lever .
Page 26 Pictorial index ■ Switches (right-hand drive vehicles) C-HR_OM_Europe_OM10528E...
Page 27 Pictorial index Manual headlight leveling dial ..... P. 267 S-IPA (Simple Intelligent Parking Assist System) switch ..... P. 422 Automatic High Beam switch .
Page 28 Pictorial index Type A  Type B  C-HR_OM_Europe_OM10528E...
Page 29 Pictorial index Meter control switches ......P. 124, 129 Vehicle-to-vehicle distance switch ....P. 336, 351 Speed limiter switch .
Page 30 Pictorial index ■ Interior (right-hand drive vehicles) SRS airbags ........P. 43 Floor mats .
Page 31 Pictorial index Assist grips ........P. 598 Vanity lights .
Page 32 Pictorial index C-HR_OM_Europe_OM10528E...
Page 33 For safety and security 1-1. For safe use Before driving.......34 For safety drive ....36 Seat belts......38 SRS airbags......43 Exhaust gas precautions ..56 1-2. Child safety Airbag manual on-off system .......57 Riding with children....60 Child restraint systems ..61 1-3. Theft deterrent system Engine immobilizer system .......87 Double locking system..95...
Page 34 1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eyelets. Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.
Page 35 When installing the driver’s floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●...
Page 36 1-1. For safe use For safety drive For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture Adjust the angle of the seat- back so that you are sitting straight up and so that you do not have to lean forward to steer.
Page 37 1-1. For safe use Adjusting the mirrors Make sure that you can see the rear of the vehicle clearly by adjusting the inside and outside rear view mirrors properly. (P. 196, 198) WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ●...
Page 38 1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder.
Page 39 1-1. For safe use Adjusting the seat belt shoulder anchor height (front seats) Push the seat belt shoulder anchor down while pressing the release button. Push the seat belt shoulder anchor up. Move the height adjuster up and down as needed until you hear a click.
Page 40 ■ Seat belt regulations If seat belt regulations exist in the country where you reside, please contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer for seat belt replacement or installation. C-HR_OM_Europe_OM10528E...
Page 41 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●...
Page 42 Ensure that the belt and plate are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact any autho- rized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.
Page 43 1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. ◆...
Page 44 1-1. For safe use SRS airbag system components C-HR_OM_Europe_OM10528E...
Page 45 1-1. For safe use Front impact sensors Curtain shield airbags Airbag manual on-off switch (if Side impact sensors (rear) equipped) Driver’s seat position sensor Front passenger airbag (if equipped) “PASSENGER AIR BAG” indi- Driver airbag cator (if equipped) Driver’s knee airbag Side impact sensors (front) equipped)
Page 46 1-1. For safe use WARNING ■ SRS airbag precautions Observe the following precautions regarding the SRS airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly.
Page 47 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are safer for infants and children than the front passenger seat.
Page 48 1-1. For safe use WARNING ■ SRS airbag precautions ● Do not allow anyone to kneel on the passenger seat toward the door or put their head or hands outside the vehicle. ● Vehicles without SRS driver’s knee air- bag: Do not attach anything to or lean anything against areas such as the dashboard or steering wheel pad.
Page 49 If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes are damaged or cracked, have them replaced by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 50 Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
Page 51 1-1. For safe use ■ If the SRS airbags deploy (inflate) ● Slight abrasions, burns, bruising, etc., may be sustained from SRS airbags, due to the extremely high speed deployment (inflation) by hot gases. ● A loud noise and white powder will be emitted. ●...
Page 52 1-1. For safe use ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags and SRS curtain shield airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration.
Page 53 1-1. For safe use ■ Types of collisions that may not deploy the SRS airbags (SRS side and curtain shield airbags) The SRS side and curtain shield airbags may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment.
Page 54 When to contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer In the following cases, the vehicle will require inspection and/or repair. Con- tact any authorized Toyota retailer or Toyota authorized repairer, or any reli- able repairer as soon as possible. ●...
Page 55 1-1. For safe use ● The surface of the seats with the side airbag is scratched, cracked, or other- wise damaged. ● The portion of the front pillars, rear pil- lars or roof side rail garnishes (padding), containing the curtain shield airbags inside, is scratched, cracked, or other- wise damaged.
Page 56: Exhaust Gas Precautions
The exhaust system needs to be checked periodically. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 57: Airbag Manual On-Off System
1-2. Child safety  Airbag manual on-off system This system deactivates the front passenger airbag. Only deactivate the airbag when using a child restraint system on the front passenger seat. “PASSENGER AIR BAG” indi- cator Vehicles without a smart entry & start system: The “PASSENGER AIR BAG”...
Page 58 “PASSENGER AIR BAG” indicator information If any of the following problems occur, it is possible that there is a malfunction in the system. Have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 59 1-2. Child safety WARNING ■ When installing a child restraint system For safety reasons, always install a child restraint system in a rear seat. In the event that the rear seat cannot be used, the front seat can be used as long as the airbag manual on-off system is set to “OFF”.
Page 60: Riding With Children
1-2. Child safety Riding with children Observe the following precautions when children are in the vehi- cle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt. ● It is recommended that children sit in the rear seats to avoid acci- dental contact with the shift lever, wiper switch, etc.
Page 61: Child Restraint Systems
● The use of a Toyota genuine child restraint system is recom- mended, as it is safer to use in this vehicle. Toyota genuine child restraint systems are made specifically for Toyota vehicles. They can be purchased at a Toyota dealer.
Page 62 ● Toyota strongly urges the use of a proper child restraint system that con- forms to the weight and size of the child, installed on the rear seat. Accord- ing to accident statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 63 1-2. Child safety WARNING ■ Handling the child restraint system If the child restraint system is not properly fixed in place, the child or other passengers may be seriously injured or even killed in the event of sudden braking, sudden swerving, or an accident. ●...
Page 64 1-2. Child safety Child restraint system Install the available child restraint system in vehicle upon confirming the following items. Standards for child restraint systems ■ Use a child restraint system that conforms to ECE R44 or ECE 1, 2 R129 The following approval mark is displayed on child restraint systems which are conformed.
Page 65 1-2. Child safety Mass group (ECE R44 only) ■ This Mass group table is required when confirming the child restraint system compatibility. Confirm in accordance with the child restraint system compatibility table. (P. 71,79). The child restraint system which conforms to the standard of ECE R44 is categorized into 5 groups according to the weight of the child.
Page 66 1-2. Child safety Types of child restraint system installation methods ■ Confirm with the operation manual enclosed with the child restraint system about the installation of the child restraint system. Installation method Page Seat belt attach- P. 71 ment ISOFIX rigid anchor P.
Page 67 1-2. Child safety When using a child restraint system When installing a child restraint system to a front passenger ■ seat For the safety of a child, install a child restraint system to a rear seat. When installing a child restraint system to a front passenger seat is unavoidable, adjust the seat as follows and install the child restraint system.
Page 68 1-2. Child safety WARNING ■ When using a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● Vehicles with an airbag manual on-off switch: Never use a rear-facing child restraint system on the front passenger seat when the airbag manual on-off switch is on.
Page 69 1-2. Child safety WARNING ■ When using a child restraint system ● Only put a forward-facing child restraint system on the front seat when unavoid- able. When installing a forward-facing child restraint on the front passenger seat, move the seat as far back as pos- sible.
Page 70 1-2. Child safety WARNING ■ When using a child restraint system ● When a junior seat is installed, always ensure that the shoulder belt is positioned across the center of the child’s shoulder. The belt should be kept away from the child’s neck, but not so that it could fall off the child’s shoulder.
Page 71 1-2. Child safety Child restraint system fixed with a seat belt ◆ Confirming the possible installation seating positions and the Mass Group for the seat belt installation type child restraint systems. Confirm the corresponding [Mass group] from the weight of the child (P.
Page 72 Systems Out- manual Center Airbag manual board on-off on-off switch switch “TOYOTA G 0+, Up to BABY SAFE 10 kg PLUS” (22 lb.) “TOYOTA MINI” “TOYOTA G 0+, BABY SAFE PLUS Up to with SEAT BELT...
Page 73 1-2. Child safety Key of letters inserted in the above table: X: Not suitable seat position for children in this mass group. U: Suitable for “universal” category child restraint systems approved for use in this mass group. UF: Suitable for forward-facing “universal” category child restraint sys- tems approved for use in this mass group.
Page 74 1-2. Child safety ● When installing a forward- facing child seat, if there is a gap between the child seat and the seatback, adjust the seatback angle until good contact is achieved. ● If the seat belt shoulder anchor is ahead of the child seat belt guide, move the seat cushion forward.
Page 75 1-2. Child safety ◆ Installing child restraint system using a seat belt Install the child restraint system in accordance to the operation manual enclosed with the child restraint system. If installing the child restraint system to the front passenger seat is unavoidable, refer to P.
Page 76 If your child restraint system does not provide a locking clip, you can purchase the following item from any authorized Toyota retailer or Toyota authorized repairer, or any reli- able repairer: Locking clip for child restraint system (Part No.
Page 77 1-2. Child safety WARNING ■ When installing a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious inju- ries that could result in death.
Page 78 1-2. Child safety Child restraint system fixed with an ISOFIX rigid anchor ISOFIX rigid anchors (ISOFIX child restraint system) ■ Lower anchors are provided for the rear outboard seats. (Marks displaying the location of the anchors are attached to the seats.) Confirming the Mass group and Size class for ECE R44 ISOFIX ■...
Page 79 1-2. Child safety Child restraint systems fastened with ISOFIX (ECE R44) - Com- ■ patibility and Recommended child restraint systems table ISOFIX child restraint systems are divided in different “size class”. According to this “size class”, you will be allowed to use it in the vehicle seating position mentioned in the table below.
Page 80 Systems Passen- Outboard Center ger seat Carrycot — Up to 10 kg (22 lb.) “TOYOTA MINI” “TOYOTA MIDI” Up to 13 kg (28 lb.) — — “TOYOTA MIDI” 9 to 18 kg (20 to 39 lb.) “TOYOTA DUO+” “TOYOTA MIDI”...
Page 81 1-2. Child safety Key of letters inserted in the above table: Not suitable seat position for ISOFIX child restraint systems in this mass group and/or size class. IUF: Suitable for ISOFIX forward-facing child restraint systems of “uni- versal” category approved for use in this mass group. Suitable for ISOFIX child restraint systems of the categories for “specific vehicles”, “restricted”, or “semi-universal”...
Page 82 1-2. Child safety i-Size child restraint systems fastened with ISOFIX (ECE ■ R129) - Compatibility table If your child restraint system is of “i-Size” category, you can install it on the positions mentioned by i-U in the table below. Child restraint system category can be found in the child restraint system manual.
Page 83 1-2. Child safety Installation with ISOFIX rigid anchor (ISOFIX child restraint ■ system) Install the child restraint system in accordance to the operation manual enclosed with the child restraint system. If the head restraint interferes with the child restraint system installation and the head restraint can be removed, remove the head restraint.
Page 84 1-2. Child safety WARNING ■ When installing a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● After securing a child restraint system, never adjust the seat. ● When using the lower anchors, be sure that there are no foreign objects around the anchors and that the seat belt is not caught behind the child restraint system.
Page 85 1-2. Child safety Fixing the top strap to the anchor bracket ■ Install the child restraint system in accordance to the operation manual enclosed with the child restraint system. Adjust the head restraint to the upmost position. If the head restraint interferes with the child restraint system or top strap installation and the head restraint can be removed,...
Page 86 1-2. Child safety WARNING ■ When installing a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● Firmly attach the top strap and make sure that the belt is not twisted. ●...
Page 87: Engine Immobilizer System
1-3. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously regis- tered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehi- cle.
Page 88 1-3. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the grip portion of the key is in contact with a metallic object ●...
Page 89 1-3. Theft deterrent system ■ Certification for the engine immobilizer system Vehicles without a smart entry & start system  C-HR_OM_Europe_OM10528E...
Page 90 1-3. Theft deterrent system C-HR_OM_Europe_OM10528E...
Page 91 1-3. Theft deterrent system Vehicles with a smart entry & start system  C-HR_OM_Europe_OM10528E...
Page 92 1-3. Theft deterrent system C-HR_OM_Europe_OM10528E...
Page 93 1-3. Theft deterrent system C-HR_OM_Europe_OM10528E...
Page 94 1-3. Theft deterrent system NOTICE ■ To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed. C-HR_OM_Europe_OM10528E...
Page 95: Double Locking System
1-3. Theft deterrent system  Double locking system Unauthorized access to the vehicle is prevented by disabling the door unlocking function from both the interior and exterior of the vehicle. Vehicles employing this system have labels on the window glass of both front doors.
Page 96 1-3. Theft deterrent system Canceling the double locking system Using the entry function (if equipped): Hold the front outside door han- dle or press the back door opener button. Using the wireless remote control: Press WARNING ■ Double locking system precaution Never activate the double locking system when there are people in the vehi- cle, because all the doors cannot be opened from inside the vehicle.
Page 97: Alarm
1-3. Theft deterrent system  Alarm The alarm The alarm uses light and sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is set: ● A locked door is unlocked or opened in any way other than using the entry function (if equipped) or wireless remote control.
Page 98 1-3. Theft deterrent system Deactivating or stopping the alarm Do one of the following to deactivate or stop the alarm: ● Unlock the doors using the entry function (if equipped) or wireless remote control. ● Start the engine. (The alarm will be deactivated or stopped after a few seconds.) ■...
Page 99 1-3. Theft deterrent system ■ Triggering of the alarm The alarm may be triggered in the following situations: (Stopping the alarm deactivates the alarm system.) ● The doors are unlocked using the key or mechanical key : Vehicles without a smart entry & start system : Vehicles with a smart entry &...
Page 100 1-3. Theft deterrent system ■ Alarm-operated door lock In the following cases, depending on the situation, the door may automatically lock to prevent improper entry into the vehicle: ● When a person remaining in the vehicle unlocks the door and the alarm is activated.
Page 101 1-3. Theft deterrent system Intrusion sensor (if equipped) The intrusion sensor detects intruders or movement in the vehicle. This system is designed to deter and prevent vehicle theft but does not guarantee absolute security against all intrusions. Setting the intrusion sensor ■...
Page 102 1-3. Theft deterrent system ■ Canceling and automatic re-enabling of the intrusion sensor ● The alarm will still be set even when the intrusion sensor is canceled. ● Vehicles without a smart entry & start system: After the intrusion sensor is canceled, turn the engine switch to the “LOCK”...
Page 103 1-3. Theft deterrent system ● Unstable items, such as dangling acces- sories hanging on the assist grips, are in the vehicle. ● The vehicle is parked in a place where extreme vibrations or noises occur, such as in a parking garage. ●...
Page 104 ● Do not spray air fresheners or other products directly into the sensor holes. ● Installing accessories other than genuine Toyota parts or leaving objects between the driver’s seat and front passenger’s seat may reduce the detection performance. C-HR_OM_Europe_OM10528E...
Page 105: Theft Prevention Labels
1-3. Theft deterrent system  Theft prevention labels These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recov- ery of parts from stolen vehicles. Do not remove under penalty of law.  : If equipped C-HR_OM_Europe_OM10528E...
Page 106 1-3. Theft deterrent system C-HR_OM_Europe_OM10528E...
Page 107: Instrument Cluster
Instrument cluster Instrument cluster Warning lights and indicators ......108 Gauges and meters ...119 Multi-information display (with monochrome display) ......124 Multi-information display (with color display)...128 Fuel consumption information.......138 C-HR_OM_Europe_OM10528E...
Page 108 2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster, cen- ter panel and outside rear view mirrors inform the driver of the status of the vehicle’s various systems. For the purpose of explanation, the following illustration dis- plays all warning lights and indicators illuminated.
Page 109 2. Instrument cluster Vehicles with color display  The units used on the speedometer and some indicators may differ depending on the target region. C-HR_OM_Europe_OM10528E...
Page 110 2. Instrument cluster Warning lights Warning lights inform the driver of malfunctions in the indicated vehi- cle’s systems. Warning lights Pages Brake system warning light (red) P. 693 Malfunction indicator lamp P. 694 SRS warning light P. 694 ABS warning light P.
Page 111 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 112 Automatic High Beam indicator (if equipped) P. 272 Parking brake indicator P. 256 1, 2 Brake hold standby indicator P. 262 Toyota parking assist-sensor indicator (if P. 409 equipped) S-IPA indicator (if equipped) P. 422 “iMT” indicator P. 251 C-HR_OM_Europe_OM10528E...
Page 113 2. Instrument cluster Indicators Pages LDA indicator (green) (if equipped) P. 315 “BSM” indicator (if equipped) P. 392 BSM outside rear view mirror indicator P. 392 (on the outside rear view mirrors) (if equipped) “RCTA” indicator (if equipped) P. 392 P.
Page 114 If the BSM outside rear view mirror indicators do not illuminate or do not turn off, there may be a malfunction in the system. If this occurs, have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 115 2. Instrument cluster Indicators and symbols displayed on the multi-information dis- play Indicators Pages 1, 2 Brake hold operated indicator P. 262 1, 2 Brake hold standby indicator P. 262 LDA indicator (if equipped) P. 315 Speed limiter indicator (if equipped) P.
Page 116 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by any authorized retailer or Toyota authorized repairer, or any reliable repairer. : Vehicles with color display only...
Page 117 2. Instrument cluster Symbols on multi-information display Pages Open door warning light P. 697 Charging system warning light P. 693 Low engine oil pressure warning light P. 693 High engine coolant temperature warning light P. 698 P. 698 LDA (Lane Departure Alert with steering con- trol) (if equipped) P.
Page 118 Have the vehicle inspected any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 119 2. Instrument cluster Gauges and meters Vehicles with monochrome display  C-HR_OM_Europe_OM10528E...
Page 120: Multi-Information Display
2. Instrument cluster Vehicles with color display  The units used on the speedometer may differ depending on the tar- get region. Tachometer Displays the engine speed in revolutions per minute. Multi-information display Presents the driver with a variety of driving-related data. (P. 124, 128) Displays warning messages in case of a malfunction.
Page 121 Displays the remaining distance until the engine oil should be changed. If “-” is displayed before distance, it means oil maintenance is overdue. Have the engine oil changed by any authorized Toyota retailer or Toyota autho- rized repairer, or any reliable repairer.
Page 122 2. Instrument cluster Changing the display Switches the items of the odome- ter and trip meter display by pressing the “TRIP” switch. When the trip meter is displayed, pressing and holding the “TRIP” switch will reset the trip meter. Instrument cluster light control (monochrome display) The brightness of the instrument cluster lights (when the headlight switch is on) can be adjusted.
Page 123 • When the outside temperature has changed suddenly (at the entrance/ exit of a garage, tunnel, etc.) ● When “--” is displayed, the system may be malfunctioning. Take your vehicle to any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. NOTICE ■...
Page 124 2. Instrument cluster Multi-information display (with mono- chrome display) Display contents The multi-information display presents the driver with a variety of driv- ing-related data. ● Drive information (P. 125) ● Warning messages (P. 704) ● Vehicle settings (P. 126) ● Meter settings (P. 126) Changing the display The multi-information display is operated using the “DISP”...
Page 125 2. Instrument cluster Drive information ● Average fuel consumption and current fuel consumption Displays the average fuel consumption since the function was last reset. • The function can be reset by pressing the “DISP” switch for lon- ger than 1 second when the average fuel consumption is dis- played.
Page 126 2. Instrument cluster Vehicle settings ● PCS (Pre-Collision System) (if equipped) (P. 298) ● LDA (Lane Departure Alert with steering control) (if equipped) (P. 315) Meter settings The settings of the following items can be changed. ● Language Select to change the language on the display. (P. 779) ●...
Page 127 2. Instrument cluster WARNING ■ Cautions during setting up the display As the engine needs to be running during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle.
Page 128 2. Instrument cluster Multi-information display (with color display) Display contents The multi-information display presents the driver with a variety of vehi- cle data. ● Menu icons Displays the following informa- tion when an icon is selected. (P. 129) Some of the information may be displayed automatically depending on the situation.
Page 129: Drive Information
2. Instrument cluster Warning message display Select to display warning messages and measures to be taken if a malfunction is detected. (P. 704) Settings display Select to change the meter display settings and the operation set- tings of some vehicle functions. (P. 132) Operating the meter control switches The multi-information display is operated using the meter control...
Page 130 2. Instrument cluster ● Distance (driving range/after start) Displays the estimated maximum distance that can be driven with the quantity of fuel remaining and the distance driven after the engine was started, respectively • This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that dis- played.
Page 131 2. Instrument cluster ● Sway warning (if equipped) Detects the sway of the vehicle within a lane, which is often associated with a decrease in the driver’s attention level, and displays the decrease in attention using a bar display. The shorter the bar length, the more the driver may need to rest. This display is a part of the LDA (Lane Departure Alert with steering con- trol).
Page 132 : The RCTA function can be enabled/disabled only when the BSM func- tion is enabled. ● Toyota parking assist-sensor (P. 408) Select to enable/disable the Toyota parking assist-sensor. ● RSA (Road Sign Assist) (P. 330) Select to set up RSA (Road Sign Assist).
Page 133 2. Instrument cluster ● Vehicle Settings Select the menu to set up the following items. • RSA (Road Sign Assist) setup (P. 335) Select to set up RSA (Road Sign Assist). • (Stop & Start system) setup (P. 379) Select to set up Stop & Start system priority. •...
Page 134 2. Instrument cluster ■ Pop-up display In some situations, such as when a switch operation is performed, a pop-up display will be temporarily displayed on the multi-information display. The pop-up display function can be set on/off. ■ Setting display automatic cancelation In the following situations, setting display in which the settings can be changed through the meter control switch will automatically be turned off.
Page 135 2. Instrument cluster ■ Dynamic Torque Control AWD system display (AWD models) Displays the Dynamic Torque Control AWD system operation state, the front tire direction (angle) and the G-force state. Front tire direction display Displays the estimated direction for the front tires. Torque distribution display Displays the amount of drive torque applied.
Page 136 2. Instrument cluster ■ Ending display When the engine switch is turned off, each of the following will be displayed on the multi-information display, and will extinguish after approximately 30 seconds. ● Elapsed time ● Distance ● Average fuel consumption WARNING ■...
Page 137 2. Instrument cluster NOTICE ■ During setting up the display To prevent battery discharge, ensure that the engine is running while setting up the display features. C-HR_OM_Europe_OM10528E...
Page 138 2. Instrument cluster  Fuel consumption information Fuel consumption information can be displayed on the naviga- tion/multimedia system. Navigation/multimedia system  : If equipped C-HR_OM_Europe_OM10528E...
Page 139 2. Instrument cluster Trip information Press on the navigation/ multimedia system. Select “Trip information”. ■ Trip information screen Average vehicle speed since the engine was started. Cruising range (P. 141) Fuel consumption in the past 15 minutes Elapsed time since engine was started.
Page 140 2. Instrument cluster Past record Press on the navigation/ multimedia system. Select “Past record”. ■ Past record screen Best recorded fuel consump- tion Previous fuel consumption record Average fuel consumption Updating the average fuel consumption data Resetting the past record data The average fuel consumption history is divided by color into past averages and the average fuel consumption since the last updated.
Page 141 2. Instrument cluster ■ Updating the past record data Update the average fuel consumption by selecting “Update” to measure the current fuel consumption again. ■ Resetting the data The fuel consumption data can be deleted by selecting “Clear”. ■ Cruising range Displays the estimated maximum distance that can be driven with the quan- tity of fuel remaining.
Page 142 2. Instrument cluster C-HR_OM_Europe_OM10528E...
Page 143 Operation of each component 3-1. Key information Keys........144 3-2. Opening, closing and locking the doors Side doors......155 Back door......165 Smart entry & start system ......171 3-3. Adjusting the seats Front seats......186 Rear seats ......188 Head restraints ....190 3-4. Adjusting the steering wheel and mirrors Steering wheel ....194 Inside rear view mirror ..196...
Page 144: Keys
3-1. Key information Keys The keys The following keys are provided with the vehicle. Vehicles without a smart entry & start system (type A)  Key (with a wireless remote control function) Operating the wireless remote con- trol function (P. 145) Key (without a wireless remote control function) Key number plate...
Page 145 (P. 156) Unlocks all the doors (P. 156) Opens the windows (P. 156) : These settings must be custom- ized at any authorized Toyota retailer Toyota authorized repairer, or any reliable repairer. Vehicles with a smart entry & start system ...
Page 146 3-1. Key information Using the key (vehicles without a smart entry & start system) Press the button to open the key. To stow, press the button then fold the key. Using the mechanical key (vehicles with a smart entry & start system) To take out the mechanical key, slide the release lever and take...
Page 147 ■ If you lose your keys New genuine keys can be made by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer using the other key (vehicles with- out a smart entry & start system) or mechanical key (vehicles with a smart entry &...
Page 148 • The battery can be exchanged by the users. (P. 652) However, as there may be damage to the key when exchanging, it is recommended to have the battery exchanged at any authorized Toyota retailer or Toyota autho- rized repairer, or any reliable repairer.
Page 149 Confirmation of the registered key number (vehicles with a smart entry & start system) The number of keys already registered to the vehicle can be confirmed. Ask any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer for details. ■...
Page 150 3-1. Key information ■ Certification for the wireless remote control Vehicles with a smart entry & start system  P. 178 Vehicles without a smart entry & start system  C-HR_OM_Europe_OM10528E...
Page 151 3-1. Key information C-HR_OM_Europe_OM10528E...
Page 152 3-1. Key information C-HR_OM_Europe_OM10528E...
Page 153 3-1. Key information For vehicles sold in Serbia  C-HR_OM_Europe_OM10528E...
Page 154 In case of a smart entry & start system malfunction or other key-related problems (vehicles with a smart entry & start system) Take your vehicle with all the electronic keys provided with your vehicle to any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ■...
Page 155 3-2. Opening, closing and locking the doors Side doors Unlocking and locking the doors from the outside ◆ Entry function (vehicles with a smart entry & start system) Carry the electronic key to enable this function. Grip the front door handle to unlock all the doors.
Page 156 Unlocks all the doors Press and hold to open the win- dows : These settings must be customized at any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. Vehicles with a smart entry & start system ...
Page 157 Unlocks all the doors Turn and hold to open the win- dows. : These settings must be customized at any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. Vehicles with a smart entry & start system ...
Page 158 3-2. Opening, closing and locking the doors ■ Operation signals Doors: The emergency flashers flash to indicate that the doors have been locked/ unlocked using the entry function or wireless remote control. (Locked: Once; Unlocked: Twice) Windows (vehicles with a smart entry & start system): A buzzer sounds to indicate that the windows are operating.
Page 159 3-2. Opening, closing and locking the doors ■ Door lock buzzer Vehicles without a smart entry & start system  If an attempt to lock the doors using the wireless remote control is made when a door is not fully closed, a buzzer will sound continuously for 10 sec- onds.
Page 160 3-2. Opening, closing and locking the doors Unlocking and locking the doors from the inside ◆ Door lock switches Locks all the doors Unlocks all the doors ◆ Inside lock buttons Locks the door Unlocks the door The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position.
Page 161 3-2. Opening, closing and locking the doors Locking the front doors from the outside without a key Move the inside lock button to the lock position. Close the door while pulling the door handle. Vehicles without a smart entry & start system ...
Page 162 3-2. Opening, closing and locking the doors ■ Switching the door unlock function (vehicles with a smart entry & start system) It is possible to set which doors the entry function unlocks using the wireless remote control. Turn the engine switch off. Cancel the intrusion sensor of the alarm system to prevent unintended trig- gering of the alarm while changing the settings.
Page 163 3-2. Opening, closing and locking the doors ■ Open door warning buzzer If the vehicle speed reaches 5 km/h (3 mph), the master warning light flashes and a buzzer sounds to indicate that the door(s) is not fully closed. The open door(s) is displayed on the multi-information display. ■...
Page 164 3-2. Opening, closing and locking the doors WARNING ■ To prevent an accident Observe the following precautions while driving the vehicle. Failure to do so may result in a door opening and an occupant falling out, of the vehicle, resulting in death or serious injury. ●...
Page 165: Back Door
3-2. Opening, closing and locking the doors Back door The back door can be unlocked/locked and opened/closed by the following procedures. Unlocking and locking the back door ◆ Entry function (vehicles with a smart entry & start system) Press the button to unlock the back door.
Page 166 3-2. Opening, closing and locking the doors Opening the back door Raise the back door while pushing up the back door opener switch. The back door cannot be closed immediately after the back door opener switch is pushed. When closing the back door Lower the back door using the back door handle, and make sure to push the back door down from...
Page 167 3-2. Opening, closing and locking the doors ■ If the back door opener is inoperative The back door can be operated from the inside. Using a screwdriver, remove the cover. To protect the cover, place a rag between the flathead screwdriver and the cover as shown in the illustration.
Page 168 3-2. Opening, closing and locking the doors WARNING ■ Caution while driving ● Keep the back door closed while driving. If the back door is left open, it may hit near-by objects while driving or lug- gage may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard.
Page 169 3-2. Opening, closing and locking the doors WARNING ■ Operating the back door Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in death or serious injury. ● Remove any heavy loads, such as snow and ice, from the back door before opening it.
Page 170 If a bicycle carrier or similar heavy object is attached to the back door, it may suddenly shut again after being opened, causing someone’s hands, head or neck to be caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recommended. NOTICE ■...
Page 171: Smart Entry & Start System
3-2. Opening, closing and locking the doors  Smart entry & start system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key. ●...
Page 172 3-2. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 0.7 m (2.3 ft.) of an outside front door handle and the back door.
Page 173 When “Entry & start system malfunction see owner’s manual” is dis- played on the multi-information display The system may be malfunctioning. Have the vehicle inspected by any autho- rized Toyota retailer or Toyota authorized repairer, or any reliable repairer immediately. ■...
Page 174 3-2. Opening, closing and locking the doors ■ Conditions affecting operation The smart entry & start system uses weak radio waves. In the following situa- tions, the communication between the electronic key and the vehicle may be affected, preventing the smart entry & start system, wireless remote control and immobilizer system from operating properly.
Page 175 3-2. Opening, closing and locking the doors ■ Note for the entry function ● Even when the electronic key is within the effective range (detection areas), the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.
Page 176 3-2. Opening, closing and locking the doors ● If the wireless remote control is used to lock the doors when the electronic key is near the vehicle, there is a possibility that the door may not be unlocked by the entry function. (Use the wireless remote control to unlock the doors.) ●...
Page 177 3-2. Opening, closing and locking the doors ■ When the vehicle is not driven for extended periods ● To prevent theft of the vehicle, do not leave the electronic key within 2 m (6 ft.) of the vehicle. ● The smart entry & start system can be deactivated in advance. (P. 776) ■...
Page 178 3-2. Opening, closing and locking the doors ■ Certification for the smart entry & start system C-HR_OM_Europe_OM10528E...
Page 179 3-2. Opening, closing and locking the doors C-HR_OM_Europe_OM10528E...
Page 180 3-2. Opening, closing and locking the doors C-HR_OM_Europe_OM10528E...
Page 181 3-2. Opening, closing and locking the doors C-HR_OM_Europe_OM10528E...
Page 182 3-2. Opening, closing and locking the doors C-HR_OM_Europe_OM10528E...
Page 183 3-2. Opening, closing and locking the doors C-HR_OM_Europe_OM10528E...
Page 184 3-2. Opening, closing and locking the doors C-HR_OM_Europe_OM10528E...
Page 185 (P. 171) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer for details, such as the frequency of radio waves and timing of the emitted radio waves.
Page 186: Adjusting The Seats Front Seats
3-3. Adjusting the seats Front seats Adjustment procedure Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (if equipped) Lumbar support adjustment switch (if equipped) C-HR_OM_Europe_OM10528E...
Page 187 3-3. Adjusting the seats WARNING ■ When adjusting the seat position ● Take care when adjusting the seat position to ensure that other passen- gers are not injured by the moving seat. ● Do not put your hands under the seat or near the moving parts to avoid injury.
Page 188: Rear Seats
3-3. Adjusting the seats Rear seats The seatbacks of the rear seats can be folded down. Before folding down the seatbacks Park the vehicle in a safe place. Apply the parking brake firmly and shift the shift lever to P (Multidrive) or N (manual transmission).
Page 189 3-3. Adjusting the seats WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When folding the rear seatbacks down ● Do not fold the seatbacks down while driving. ● Stop the vehicle on level ground, set the parking brake and shift the shift lever to P (Multidrive) or N (manual transmission).
Page 190: Head Restraints
3-3. Adjusting the seats Head restraints Head restraints are provided for the front seats, rear outboard seats and rear center seat (if equipped). Front seats Pull the head restraint up. Down Push the head restraint down while pressing the lock release button. Lock release button Rear seats Pull the head restraint up.
Page 191 3-3. Adjusting the seats ■ Removing the head restraints Pull the head restraint up while pressing the lock release button. Front seats  Lock release button Rear seats  Lock release button C-HR_OM_Europe_OM10528E...
Page 192 3-3. Adjusting the seats ■ Installing the head restraints Align the head restraint with the installation holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint. Front seats  Lock release button Rear seats ...
Page 193 3-3. Adjusting the seats WARNING ■ Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. ● Use the head restraints designed for each respective seat. ● Adjust the head restraints to the correct position at all times. ●...
Page 194: Wheel And Mirrors Steering Wheel
3-4. Adjusting the steering wheel and mirrors Steering wheel Adjustment procedure Hold the steering wheel and push the lever down. Adjust to the ideal position by moving the steering wheel hori- zontally and vertically. After adjustment, pull the lever up to secure the steering wheel.
Page 195 3-4. Adjusting the steering wheel and mirrors ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. WARNING ■ Caution while driving Do not adjust the steering wheel while driving.
Page 196: Inside Rear View Mirror
3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable suffi- cient confirmation of the rear view. Adjusting the height of rear view mirror The height of the rear view mirror can be adjusted to suit your driving posture.
Page 197 3-4. Adjusting the steering wheel and mirrors Auto anti-glare inside rear view mirror  Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced. Changing automatic anti-glare function mode On/off When the automatic anti-glare function is in on mode, the indica- tor illuminates.
Page 198: Outside Rear View Mirrors
3-4. Adjusting the steering wheel and mirrors Outside rear view mirrors Adjustment procedure To select a mirror to adjust, turn the switch. Left Right To adjust the mirror, operate the switch. Right Down Left C-HR_OM_Europe_OM10528E...
Page 199 3-4. Adjusting the steering wheel and mirrors Folding and extending the mirrors Manual type  Push the mirror back in the direc- tion of the rear of the vehicle. Power type  Folds the mirrors Extends the mirrors Putting the outside rear view mirror folding switch in the neutral posi- tion sets the mirrors to automatic mode.
Page 200 3-4. Adjusting the steering wheel and mirrors ■ Mirror angle can be adjusted when Vehicles without a smart entry & start system: The engine switch is in the “ACC” or “ON” position. Vehicles with a smart entry & start system: The engine switch is in ACCESSORY or IGNITION ON mode.
Page 201 3-5. Opening and closing the windows Power windows Opening and closing procedures The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Closing One-touch closing Opening One-touch opening : To stop the window partway, oper- ate the switch in the opposite direc- tion.
Page 202 3-5. Opening and closing the windows ■ The power windows can be operated when Vehicles without a smart entry & start system: The engine switch is in the “ON” position. Vehicles with a smart entry & start system: The engine switch is in IGNITION ON mode. ■...
Page 203 If you release the switch while the window is moving, start again from the beginning. If the window reverses and cannot be fully closed or opened, have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 204 The power windows can be opened and closed using the wireless remote control. (P. 156) : These settings must be customized at any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ■ Power window open reminder function The buzzer sounds and a message is shown on the multi-information display in the instrument cluster when the engine switch is turned off and the driver’s...
Page 205 3-5. Opening and closing the windows WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Closing the windows ● The driver is responsible for all the power window operations, including the operation for the passengers. In order to prevent accidental operation, especially by a child, do not let a child operate the power windows.
Page 206 3-5. Opening and closing the windows WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Jam protection function ● Never use any part of your body to intentionally activate the jam protection function.
Page 207 Driving 4-1. Before driving 4-5. Using the driving support systems Driving the vehicle .....208 Toyota Safety Sense ..290 Cargo and luggage ....222 PCS (Pre-Collision Trailer towing .....223 System) ......298 4-2. Driving procedures LDA (Lane Departure Engine (ignition) switch Alert with steering (vehicles without control)......315...
Page 208: Driving The Vehicle
4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving: Starting the engine P. 233, 236 Driving Multidrive  With the brake pedal depressed, shift the shift lever to D. (P. 244) Release the parking brake. (P. 258) If the parking brake is in automatic mode, the parking brake is released automatically when shifting the shift lever to any position other than P.
Page 209 4-1. Before driving Stopping Multidrive  With the shift lever in D, depress the brake pedal. If necessary, set the parking brake. If the vehicle is to be stopped for an extended period of time, shift the shift lever to P or N. (P. 244) Manual transmission ...
Page 210 4-1. Before driving Parking the vehicle Multidrive  With the shift lever in D, depress the brake pedal. Set the parking brake (P. 258), and shift the shift lever to P. (P. 244) If the parking brake is in automatic mode, the parking brake is set automat- ically when shifting the shift lever to P.
Page 211 4-1. Before driving Starting off on a steep uphill Multidrive  With the brake pedal depressed, shift the shift lever to D. Pull the parking brake switch and parking brake is set manually. (P. 258) Release the brake pedal and gently depress the accelerator pedal to accelerate the vehicle.
Page 212 4-1. Before driving ■ When starting off on an uphill The hill-start assist control will activate. (P. 462) ■ Driving in the rain ● Drive carefully when it is raining, because visibility will be reduced, the win- dows may become fogged-up, and the road will be slippery. ●...
Page 213 In such case, deactivate TRC to can- cel Drive-Start Control so that the vehicle may become able to escape from the mud or fresh snow. ■ Breaking in your new Toyota To extend the life of the vehicle, observing the following precautions is recom- mended: ●...
Page 214 4-1. Before driving ■ Operating your vehicle in a foreign country Comply with the relevant vehicle registration laws and confirm the availability of the correct fuel. (P. 764) ■ Idling time before engine stop To prevent damage to the turbocharger, allow the engine to idle immediately after high-speed driving or hill climbing.
Page 215 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When driving the vehicle ● Do not drive if you are unfamiliar with the location of the brake and accel- erator pedals to avoid depressing the wrong pedal.
Page 216 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When driving on slippery road surfaces ● Sudden braking, acceleration and steering may cause tire slippage and reduce your ability to control the vehicle. ●...
Page 217 If you hear a squealing or scraping noise (brake pad wear indicators) Have the brake pads checked and replaced by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer as soon as possible. Rotor damage may result if the pads are not replaced when needed.
Page 218 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When the vehicle is parked ● Do not leave glasses, cigarette lighters, spray cans, or soft drink cans in the vehicle when it is in the sun. Doing so may result in the following: •...
Page 219 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When taking a nap in the vehicle Always turn the engine off. Otherwise, if you accidentally move the shift lever or depress the accelerator pedal, this could cause an accident or fire due to engine overheating.
Page 220 4-1. Before driving NOTICE ■ When driving the vehicle (vehicles with a Multidrive) ● Do not depress the accelerator and brake pedals at the same time during driving, as this may restrain the engine output. ● Do not use the accelerator pedal or depress the accelerator and brake pedals at the same time to hold the vehicle on a hill.
Page 221 Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer check the following: ●...
Page 222: Cargo And Luggage
4-1. Before driving Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load. WARNING ■ Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compartment: ●...
Page 223: Trailer Towing
MPAC (Maximum Permissible Axle Capacity), and permissible drawbar load before towing. (P. 762) ◆ Towing hitch/bracket Toyota recommends the use of the Toyota hitch/bracket for your vehicle. Other products of a suitable nature and comparable quality may also be used. C-HR_OM_Europe_OM10528E...
Page 224 4-1. Before driving Important points regarding trailer loads Total trailer weight and permissible drawbar load ■ Total trailer weight Weight of the trailer itself plus the trailer load should be within the maximum towing capacity. Exceeding this weight is danger- ous.
Page 225 4-1. Before driving Information tag (manufacturer’s label) ■ Gross vehicle mass The combined weight of the driver, passengers, luggage, towing hitch, total curb mass and drawbar load should not exceed the gross vehicle mass by more than 100 kg (220.5 lb.). Exceeding this weight is danger- ous.
Page 226 4-1. Before driving Installation positions for the towing hitch/bracket and hitch ball 519 mm (20.4 in.) 519 mm (20.4 in.) 894 mm (35.2 in.) 559 mm (22.0 in.) 379 mm (14.9 in.) 387 mm (15.2 in.) 395 mm (15.6 in.) 43.6 mm (1.7 in.) : Vehicles with a Stop &...
Page 227 ■ Trailer lights Please consult at any authorized retailer or Toyota authorized repairer, or any reliable repairer when installing trailer lights, as incorrect installation may cause damage to the vehicle’s lights. Please take care to comply with your state’s laws when installing trailer lights.
Page 228 4-1. Before driving ■ If trailer sway occurs One or more factors (crosswinds, passing vehicles, rough roads, etc.) can adversely affect handling of your vehicle and trailer, causing instability. ● If trailer swaying occurs: • Firmly grip the steering wheel. Steer straight ahead. Do not try to control trailer swaying by turning the steering wheel.
Page 229 4-1. Before driving Guidance Your vehicle will handle differently when towing a trailer. In order to avoid accident, death or serious injury, keep the following in mind when towing: Checking connections between trailer and lights ■ Stop the vehicle and check the operation of the connection between the trailer and lights after driving for a brief period as well as before starting off.
Page 230 4-1. Before driving Important points regarding stability ■ Vehicle movement resulting from uneven road surfaces and strong crosswinds will affect handling. The vehicle may also be rocked by passing buses or large trucks. Frequently check behind when mov- ing alongside such vehicles. As soon as such vehicle movement occurs, immediately start to decelerate smoothly by slowly applying the brakes.
Page 231 4-1. Before driving WARNING Follow all the instructions described in this section. Failure to do so could cause an accident resulting in death or serious injury. ■ Trailer towing precautions When towing, make sure that none of the weight limits are exceeded. (P.
Page 232 4-1. Before driving NOTICE ■ Do not directly splice trailer lights Directly splicing trailer lights may damage your vehicle’s electrical system and cause a malfunction. C-HR_OM_Europe_OM10528E...
Page 233: Engine (Ignition) Switch
4-2. Driving procedures Engine (ignition) switch (vehicles without a smart entry & start system) Starting the engine Check that the parking brake is set. Check that the shift lever is in P (Multidrive) or N (manual transmis- sion). Firmly depress the brake pedal (Multidrive) or clutch pedal (manual transmission).
Page 234 “LOCK” position. ■ If the engine does not start The engine immobilizer system may not have been deactivated. (P. 87) Contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ■ When the steering lock cannot be released When starting the engine, the engine switch may seem stuck in the “LOCK”...
Page 235 ● Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer immediately. C-HR_OM_Europe_OM10528E...
Page 236 4-2. Driving procedures Engine (ignition) switch (vehicles with a smart entry & start system) Performing the following operations when carrying the elec- tronic key on your person starts the engine or changes engine switch modes. Starting the engine Check that the parking brake is set. Check that the shift lever is in P (Multidrive) or N (manual transmis- sion).
Page 237 4-2. Driving procedures Stopping the engine Vehicles with a Multidrive  Stop the vehicle. Set the parking brake (P. 258), and shift the shift lever to P. If the parking brake is in automatic mode, the parking brake is set automat- ically when shifting the shift lever to P.
Page 238 4-2. Driving procedures Changing engine switch modes Modes can be changed by pressing the engine switch with brake pedal (Multidrive) or clutch pedal (manual transmission) released. (The mode changes each time the switch is pressed.) The emergency flashers can be used.
Page 239 4-2. Driving procedures When stopping the engine with the shift lever in a position other than P (vehicles with a Multidrive) If the engine is stopped with the shift lever in a position other than P, the engine switch will not be turned off but instead be turned to ACCESSORY mode.
Page 240 If the engine does not start ● The engine immobilizer system may not have been deactivated. (P. 87) Contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ● Vehicles with a Multidrive: Check that the shift lever is securely set in P. The engine may not start if the shift lever is displaced out of P.
Page 241 When “Entry & Start System Malfunction. See Owner’s Manual.” is dis- played on the multi-information display The system may be malfunctioning. Have the vehicle inspected by any autho- rized Toyota retailer or Toyota authorized repairer, or any reliable repairer immediately. ■...
Page 242 4-2. Driving procedures WARNING ■ When starting the engine Always start the engine while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. ■...
Page 243 Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer immediately. ■ Symptoms indicating a malfunction with the engine switch If the engine switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction.
Page 244: Multidrive
4-2. Driving procedures  Multidrive Shifting the shift lever Vehicles without a smart entry & start system: While the engine switch is in the “ON” position, depress the brake pedal and while pressing the button move the shift lever. When shifting the shift lever between P and D, make sure that the vehicle is completely stopped.
Page 245 4-2. Driving procedures Shift position purpose Shift position Objective or function Parking the vehicle/starting the engine Reversing Neutral Normal driving 7-speed sport sequential shiftmatic mode driving (P. 246) : To improve fuel efficiency and reduce noises, set the shift lever in D for normal driving.
Page 246 M This may indicate a malfunction in the Multidrive system. Have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer immediately. (In this situation, the transmission will operate in the same manner as when the shift lever is in D.)
Page 247 4-2. Driving procedures ■ When the vehicle comes to a stop with the shift lever in the M position ● The transmission will automatically downshift to M1 once the vehicle is stopped. ● After a stop, the vehicle will start off in M1. ●...
Page 248 If the shift lever cannot be shifted with your foot on the brake pedal while pressing the button on the shift knob, there may be a problem with the shift lock system. Have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer immediately.
Page 249 4-2. Driving procedures WARNING ■ When driving on slippery road surfaces Be careful of downshifting and sudden acceleration, as this could result in the vehicle skidding to the side or spinning. ■ To prevent an accident when releasing the shift lock Before pressing the shift lock override button, make sure to set the parking brake and depress the brake pedal.
Page 250: Manual Transmission
4-2. Driving procedures  Manual transmission Shifting the shift lever Fully depress the clutch pedal before operating the shift lever, and then release it slowly. Shifting the shift lever to R Shift the shift lever to R while lift- ing up the ring section. Selecting a driving mode ...
Page 251 4-2. Driving procedures Gear Shift Indicator Gear Shift Indicator is a guide to help the driver achieve improved fuel economy and reduced exhaust emissions within limits of engine per- formance. Upshifting Downshifting iMT (Intelligent Manual Transmission) iMT detects clutch pedal and shift lever operations performed by the driver.
Page 252 4-2. Driving procedures ■ Gear Shift Indicator display Gear Shift Indicator may not be displayed when your foot is placed on the clutch pedal. ■ Maximum allowable speeds Observe the following maximum allowable speeds in each gear when maxi- mum acceleration is necessary. km/h (mph) Shift position Maximum speed...
Page 253 If the warning message for iMT is shown on the multi-information dis- play iMT may be malfunctioning and the function is disabled. Have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. WARNING ■...
Page 254 4-2. Driving procedures NOTICE ■ To prevent damage to the transmission ● Do not shift the shift lever to R without depressing the clutch pedal. ● Do not lift up the ring section except when shifting the lever to R. ●...
Page 255: Turn Signal Lever
4-2. Driving procedures Turn signal lever Operating instructions Right turn Lane change to the right (move the lever partway and release The right hand signals will flash 3 times. Lane change to the left (move the lever partway and release The left hand signals will flash 3 times.
Page 256: Parking Brake
4-2. Driving procedures Parking brake A selections can be made as desired from the following modes. Automatic mode The parking brake is set or released automatically according to shift lever or engine switch operation. Even when in automatic mode, the parking brake can be set and released manually.
Page 257 4-2. Driving procedures Vehicles with a manual transmission  Turns automatic mode (while the vehicle is stopped, pull and hold the parking brake switch until Auto P-off indicator light will go off) When the engine is off, the parking brake will be set, and the parking brake indicator light and parking brake lamp turn on.
Page 258 4-2. Driving procedures Manual mode The parking brake can be set and released manually. Pull the parking brake switch to set the parking brake The parking brake indicator light and parking brake lamp will turn Pull and hold the parking brake switch if an emergency occurs and it is necessary to operate the park- ing brake while driving.
Page 259 Operate the parking brake switch. If the message does not disappear after operating the switch several times, the system may be malfunctioning. Have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer immediately.
Page 260 4-2. Driving procedures ■ Parking brake indicator light and parking brake lamp ● Depending on the engine switch position/mode, the parking brake indicator light and parking brake lamp will turn on and stay on as described below: Vehicles without a smart entry & start system ...
Page 261 Driving the vehicle with the parking brake set will lead to brake components overheating, which may affect braking performance and increase brake wear. Have the vehicle inspected by contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer immediately if this occurs.
Page 262: Brake Hold
4-2. Driving procedures Brake Hold The brake hold system keeps the brake applied when the shift lever in any position other than P or R (Multidrive), or R (manual transmission) with the system on and the brake pedal has been depressed to stop the vehicle.
Page 263 If “Brake hold fault depress brake to deactivate visit your dealer” is dis- played on the multi-information display The system may be malfunctioning. Have the vehicle inspected by any autho- rized Toyota retailer or Toyota authorized repairer, or any reliable repairer immediately. ■...
Page 264 4-2. Driving procedures WARNING ■ When the vehicle is on a steep incline When using the brake hold system on a steep incline exercise caution. The brake hold function may not hold the vehicle in such a situation. ■ When stopped on a slippery road The system cannot stop the vehicle when the gripping ability of the tires has been exceeded.
Page 265: Headlight Switch
4-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Operating instructions Turning the end of the lever turns on the lights as follows: The headlights, daytime running lights (P. 268) and all the lights listed below turn on and off automatically.
Page 266 4-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever away from you to turn on the high beams. Pull the lever toward you to the center position to turn the high beams off.
Page 267 4-3. Operating the lights and wipers Manual headlight leveling dial (vehicles with halogen headlights) The level of the headlights can be adjusted according to the number of passengers and the loading condition of the vehicle. Raises the level of the head- lights Lowers the level of the head- lights...
Page 268 4-3. Operating the lights and wipers ■ Daytime running light system To make your vehicle more visible to other drivers during daytime driving, the daytime running lights turn on automatically whenever the engine is started and the parking brake is released with the headlight switch in .
Page 269 If “Headlight system malfunction visit your dealer” is displayed on the multi-information display The system may be malfunctioning. Have the vehicle inspected by any autho- rized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ■ Customization Settings (e.g. light sensor sensitivity) can be changed.
Page 270 4-3. Operating the lights and wipers NOTICE ■ To prevent battery discharge Do not leave the lights on longer than necessary when the engine is not running. C-HR_OM_Europe_OM10528E...
Page 271: Automatic High Beam
4-3. Operating the lights and wipers  Automatic High Beam The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of vehicles ahead, etc., and automatically turns the high beam on or off as necessary.
Page 272 4-3. Operating the lights and wipers Activating the Automatic High Beam system Push the lever away from you with the headlight switch in the position. Press the Automatic High Beam switch. The Automatic High Beam indicator will come on when the headlights are turned on automatically to indicate that the system is active.
Page 273 4-3. Operating the lights and wipers Turning the high beam on/off manually Switching to low beam ■ Pull the lever to the original position. The Automatic High Beam indi- cator will turn off. Push the lever away from you to activate the Automatic High...
Page 274 4-3. Operating the lights and wipers ■ High beam automatic turning on or off conditions ● When all of the following conditions are fulfilled, the high beam will be auto- matically turned on (after approximately 1 second): • Vehicle speed is above approximately 40 km/h (25 mph). •...
Page 275 ■ If “Headlight system malfunction visit your dealer” is displayed on the multi-information display The system may be malfunctioning. Have the vehicle inspected by any autho- rized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 276: Fog Light Switch
4-3. Operating the lights and wipers Fog light switch The fog lights secure excellent visibility in difficult driving con- ditions, such as in rain and fog. Operating instructions Rear fog light switch  Turns the rear fog light Turns the rear fog light Releasing the switch ring returns it Operating the switch ring again turns the rear fog light off.
Page 277 4-3. Operating the lights and wipers Front and rear fog light switch  Turns the front and rear fog lights off Turns the front fog lights Turns both front and rear fog lights on Releasing the switch ring returns it Operating the switch ring again turns only the rear fog light off.
Page 278: Windshield Wipers And Washer
4-3. Operating the lights and wipers Windshield wipers and washer Operating the wiper lever Intermittent windshield wipers with interval adjuster  The wiper operation is selected by moving the lever as follows. When intermittent windshield wiper operation is selected, the wiper interval can be also adjusted.
Page 279 4-3. Operating the lights and wipers Washer/wiper dual operation Wipers will automatically operate a couple of times after the washer squirts. Vehicles with headlight cleaners: When the headlights are on and the lever is pulled and held, the headlight cleaners will operate once.
Page 280 4-3. Operating the lights and wipers When “AUTO” is selected, the sensor sensitivity can be adjusted as follows by turning the switch ring. Increases rain-sensing windshield wiper sensitivity Decreases rain-sensing windshield wiper sensitivity Washer/wiper dual operation Wipers will automatically operate a couple of times after the washer squirts.
Page 281 4-3. Operating the lights and wipers ■ The windshield wiper and washer can be operated when Vehicles without a smart entry & start system  The engine switch is in the “ON” position. Vehicles with a smart entry & start system ...
Page 282 ■ When a nozzle becomes blocked In this case, contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
Page 283: Rear Window Wiper And Washer
4-3. Operating the lights and wipers  Rear window wiper and washer Operating instructions The wiper operation is selected by moving the lever as follows: Intermittent window wiper operation Normal window wiper operation Washer/wiper dual operation The wiper will automatically oper- ate a couple of times after the washer squirts.
Page 284 ■ When a nozzle becomes blocked In this case, contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
Page 285: Opening The Fuel Tank Cap
4-4. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: Before refueling the vehicle ● Vehicles without a smart entry & start system Turn the engine switch to the “LOCK” position and ensure that all the doors and windows are closed.
Page 286 4-4. Refueling WARNING ■ When refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● After exiting the vehicle and before opening the fuel door, touch an unpainted metal surface to discharge any static electricity.
Page 287 4-4. Refueling NOTICE ■ Refueling Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the emission control system to operate abnormally, or damaging fuel system components, or the vehicle’s painted surface. Opening the fuel tank cap Press the opener to open the fuel filler door.
Page 288 4-4. Refueling ■ When the fuel filler door cannot be opened Open the back door and lid : if equipped Remove the cover underneath the lug- gage compartment light. Pull the lever backward and check that the fuel filler door opens. C-HR_OM_Europe_OM10528E...
Page 289 WARNING ■ When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 290: Toyota Safety Sense
■ Toyota Safety Sense The Toyota Safety Sense is designed to operate under the assumption that the driver will drive safely, and is designed to help reduce the impact to the occupants and the vehicle in the case of a collision or assist the driver in normal driving conditions.
Page 291 Toyota will not disclose the recorded data to a third party except: • With the consent of the vehicle owner or with the consent of the lessee if the vehicle is leased •...
Page 292 4-5. Using the driving support systems Sensors Two types of sensors, located behind the front grille and windshield, detect information necessary to operate the drive assist systems. Radar sensor Camera sensor WARNING ■ To avoid malfunction of the radar sensor Observe the following precautions.
Page 293 Do not subject the radar sensor or surrounding area to a strong impact. If the radar sensor, front grille, or front bumper has been subjected to a strong impact, have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 294 If the wiper inserts or wiper blades need to be replaced, contact any autho- rized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ● Do not attach window tinting to the windshield.
Page 295 When cleaning the inside of the windshield, do not allow glass cleaner to contact the lens. Also, do not touch the lens. If the lens is dirty or damaged, contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 296 4-5. Using the driving support systems ■ Certification C-HR_OM_Europe_OM10528E...
Page 297 4-5. Using the driving support systems C-HR_OM_Europe_OM10528E...
Page 298: Pcs (Pre-Collision System)
(P. 302) : Depending on the region in which the vehicle was sold, the pedestrian detection function may not be available. Contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer for details.  : If equipped...
Page 299 4-5. Using the driving support systems ◆ Pre-collision warning When the system determines that the possibility of a frontal collision is high, a buzzer will sound and a warning message will be displayed on the multi- information display to urge the driver to take evasive action.
Page 300 4-5. Using the driving support systems WARNING ■ Limitations of the pre-collision system ● The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. Do not use the pre-collision system instead of normal braking operations under any circumstances.
Page 301 4-5. Using the driving support systems WARNING ■ When to disable the pre-collision system In the following situations, disable the system, as it may not operate prop- erly, possibly leading to an accident resulting in death or serious injury: ● When the vehicle is being towed ●...
Page 302 4-5. Using the driving support systems Changing settings of the pre-collision system Enabling/disabling the pre-collision system ■ Monochrome display  The pre-collision system can be enabled/disabled on the multi- information display as following: The system is automatically enabled each time the engine switch is turned to the “ON”...
Page 303 4-5. Using the driving support systems Color display  The pre-collision system can be enabled/disabled on the multi- information display as following: The system is automatically enabled each time the engine switch is turned to the “ON” position (vehicles without a smart entry & start sys- tem) or turned to IGNITION ON mode (vehicles with a smart entry &...
Page 304 4-5. Using the driving support systems Changing the pre-collision warning timing ■ Monochrome display  The pre-collision warning timing can be changed on the multi-infor- mation display as following: The operation timing setting is retained when the engine switch is turned off.
Page 305 4-5. Using the driving support systems Color display  The pre-collision warning timing can be changed on the multi-infor- mation display as following: The operation timing setting is retained when the engine switch is turned off. Press “” or “” of meter control switches and select Press “”...
Page 306 4-5. Using the driving support systems ■ Operational conditions Availability of the pedestrian detection function depends on the region in which the vehicle was sold. Regions Function availability Region A The pedestrian detection function is available Region B The pedestrian detection function is not available Read the following for details: Region A ...
Page 307 4-5. Using the driving support systems The system may not operate in the following situations: ● If a battery terminal has been disconnected and reconnected and then the vehicle has not been driven for a certain amount of time ● If the shift lever is in R ●...
Page 308 4-5. Using the driving support systems ■ Pedestrian detection function The pre-collision system detects pedestri- ans based on the size, profile, and motion of a detected object. However, a pedes- trian may not be detected depending on the surrounding brightness and motion, posture, angle...
Page 309 4-5. Using the driving support systems • When driving on a road where relative location to vehicle ahead in an adja- cent lane may change, such as on a winding road • When rapidly closing on a vehicle ahead • If the front of the vehicle is raised or lowered, such as when the road sur- face is uneven or undulating •...
Page 310 4-5. Using the driving support systems • When passing through a place with a low structure above the road (low ceil- ing, traffic sign, etc.) • When passing under an object (bill- board, etc.) at the top of an uphill road •...
Page 311 4-5. Using the driving support systems ■ Situations in which the system may not operate properly ● In some situations such as the following, a vehicle may not be detected by the radar sensor and camera sensor, preventing the system from operating properly: •...
Page 312 4-5. Using the driving support systems • When driving in inclement weather such as heavy rain, fog, snow or a sandstorm • When the vehicle is hit by water, snow, dust, etc., from a vehicle ahead • When driving through steam or smoke •...
Page 313 4-5. Using the driving support systems ● In some situations such as the following, sufficient braking force may not be obtained, preventing the system from performing properly: • If the braking functions cannot operate to their full extent, such as when the brake parts are extremely cold, extremely hot, or wet •...
Page 314 If the PCS warning light continues to flash or illuminate, or the warning mes- sage does not disappear, the system may be malfunctioning. Have the vehi- cle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer immediately.
Page 315 4-5. Using the driving support systems LDA (Lane Departure Alert with steering  control) Summary of functions When driving on highways and freeways with white (yellow) lines, this function alerts the driver when the vehicle might depart from its lane and provides assistance by operating the steering wheel to keep the vehicle in its lane.
Page 316 4-5. Using the driving support systems Functions included in LDA system ◆ Lane departure alert function When the system determines that the vehicle might depart from its lane, a warning is dis- played on the multi-information display and the warning buzzer sounds to alert the driver.
Page 317 4-5. Using the driving support systems ◆ Steering control function When the system determines that the vehicle might depart from its lane, the system pro- vides assistance as necessary by operating the steering wheel in small amounts for a short period of time to keep the vehi- cle in its lane.
Page 318 4-5. Using the driving support systems ◆ Vehicle sway warning When the vehicle is swaying or appears as if it may depart from its lane multiple times, the warning buzzer sounds and a message is displayed on the multi-information display to alert the driver.
Page 319 Do not install or place anything on the hood or grille. Also, do not install a grille guard (bull bars, kangaroo bar, etc.). ● If your windshield needs repairs, contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 320 4-5. Using the driving support systems Turning LDA system on Press the LDA switch to turn the LDA system on. The LDA indicator illuminates and a message is displayed on the multi- information display. Press the LDA switch again to turn the LDA system off. When the LDA system is turned on or off, operation of the LDA system continues in the same condition the next time the engine is started.
Page 321 4-5. Using the driving support systems Indications on multi-information display Monochrome display  LDA indicator The illumination condition of the indicator informs the driver of the system operation status. Illuminated in white: LDA system is operating. Illuminated in green: Steering wheel assistance of the steering control function is operat- ing.
Page 322 4-5. Using the driving support systems Inside of displayed white lines is Inside of displayed white lines is white: black: Indicates that the system is recog- Indicates that the system is not nizing white (yellow) lines. When able to recognize white (yellow) the vehicle departs from its lane, lines or is temporarily canceled.
Page 323 4-5. Using the driving support systems Color display  LDA indicator The illumination condition of the indicator informs the driver of the system operation status. Illuminated in white: LDA system is operating. Illuminated in green: Steering wheel assistance of the steering control function is operat- ing.
Page 324 4-5. Using the driving support systems Inside of displayed white lines is Inside of displayed white lines is white: black: Indicates that the system is recog- Indicates that the system is not nizing white (yellow) lines. When able to recognize white (yellow) the vehicle departs from its lane, lines or is temporarily canceled.
Page 325 4-5. Using the driving support systems ■ Operation conditions of each function ● Lane departure alert function This function operates when all of the following conditions are met. • LDA is turned on. • Vehicle speed is approximately 50 km/h (32 mph) or more. •...
Page 326 4-5. Using the driving support systems ● Vehicle sway warning This function operates when all of the following conditions are met. • Monochrome display: Setting for sway alert on-off mode in screen of the multi-informa- tion display is set to on. (P. 124) •...
Page 327 4-5. Using the driving support systems ■ Conditions in which functions may not operate properly In the following situations, the camera sensor may not detect white (yellow) lines and various functions may not operate normally. ● There are shadows on the road that run parallel with, or cover, the white (yellow) lines.
Page 328 The system may not be operating properly.  Have the vehicle inspected at any “Lane departure alert malfunction visit your dealer” authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. Dirt, rain, condensation, ice, snow, etc., are present on the windshield in front of the camera sensor.
Page 329 4-5. Using the driving support systems Warning message Details/Actions The LDA system is temporarily can- celed due to a malfunction in a sensor other than the camera sensor.  Turn the LDA system off and follow “LDA unavailable” appropriate troubleshooting procedures for warning message.
Page 330: Rsa (Road Sign Assist)
4-5. Using the driving support systems  RSA (Road Sign Assist) Summary of function RSA recognizes specific road signs using the camera sensor and provides information to the driver via the multi-information display. If the system judges that the vehicle is being driven over the speed limit, performing prohibited actions, etc., in relation to the recognized road signs, it alerts the driver using a warning display and warning buzzer...
Page 331 4-5. Using the driving support systems Indication on the multi-information display After the camera sensor recognizes a sign, it is displayed on the multi- information display when the vehicle passes the sign. ● When the driving assist system information is selected, a maxi- mum of 3 signs can be dis- played.
Page 332 4-5. Using the driving support systems Types of recognized road signs The following types of road signs, including electronic signs and blink- ing signs, are recognized. A non-official (not meeting the Vienna Convention) or a recently intro- duced traffic sign may not be recognized. Type Multi-information display Speed limit begins/ends...
Page 333 4-5. Using the driving support systems Type Multi-information display No overtaking begins/ends All canceled (All restrictions canceled. Returns to default road regulation.) : If the turn signal indicator is not operated when changing lanes, the mark does not display. Warning display In the following situations, the RSA system alerts the driver using a warning display.
Page 334 4-5. Using the driving support systems ■ Automatic turn-off of RSA sign display One or more signs automatically turn off in the following situations. ● A new sign is not recognized for a certain distance. ● The road changes due to a left or right turn, etc. ■...
Page 335 4-5. Using the driving support systems ■ When driving vehicle in country with different speed unit Since RSA recognizes signs based on the set unit of the meter, it is neces- sary to change the set unit of the meter. Adjust the set unit of the meter to the speed unit of signs in the current location.
Page 336: Control With Full-Speed Range
4-5. Using the driving support systems Dynamic radar cruise controlwith full-speed  range Summary of functions In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates, decelerates and stops to match the speed changes of the preceding vehicle even if the accelerator pedal is not depressed. In constant speed control mode, the vehicle runs at a fixed speed.
Page 337: Dynamic Radar Cruise
4-5. Using the driving support systems WARNING ■ Before using dynamic radar cruise control with full-speed range Driving safely is the sole responsibility of the driver. Do not rely solely on the system, and drive safely by always paying careful attention to your sur- roundings.
Page 338 4-5. Using the driving support systems WARNING ■ To avoid inadvertent dynamic radar cruise control with full-speed range activation Switch the dynamic radar cruise control with full-speed range off using the “ON-OFF” button when not in use. ■ Situations unsuitable for dynamic radar cruise control with full-speed range Do not use dynamic radar cruise control with full-speed range in any of the following situations.
Page 339 4-5. Using the driving support systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar sensor to detect the presence of vehicles up to approximately 100 m (328 ft.) ahead, determines the current vehicle-to-vehicle following distance, and operates to maintain a suit- able following distance from the vehicle ahead.
Page 340 4-5. Using the driving support systems Example of constant speed cruising When there are no vehicles ahead The vehicle travels at the speed set by the driver. The desired vehicle-to- vehicle distance can also be set by operating the vehicle-to-vehicle dis- tance switch.
Page 341 4-5. Using the driving support systems Setting the vehicle speed (vehicle-to-vehicle distance control mode) Press the “ON-OFF” button to activate the cruise control. Radar cruise control indicator will come on and a message will be displayed on the multi-information display. Press the button again to deacti- vate the cruise control.
Page 342 4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the lever until the desired set speed is displayed. Increases the speed (Except when the vehicle has been stopped by system control in vehi- cle-to-vehicle distance control...
Page 343 4-5. Using the driving support systems Changing the vehicle-to-vehicle distance (vehicle-to-vehicle dis- tance control mode) Pressing the button changes the Preceding vehicle mark vehicle-to-vehicle distance as fol- lows: Long Medium Short The vehicle-to-vehicle distance is set automatically to long mode when the engine switch is turned to the “ON”...
Page 344 4-5. Using the driving support systems Resuming follow-up cruising when the vehicle has been stopped by system control (vehicle-to-vehicle distance control mode) After the vehicle ahead of you starts off, push the lever up. Your vehicle will also resume fol- low-up cruising if the accelerator pedal is depressed after the vehi- cle ahead of you starts off.
Page 345 4-5. Using the driving support systems Approach warning (vehicle-to-vehicle distance control mode) When your vehicle is too close to a vehicle ahead, and sufficient automatic deceleration via the cruise control is not possible, the display will flash and the buzzer will sound to alert the driver.
Page 346 4-5. Using the driving support systems Selecting constant speed control mode When constant speed control mode is selected, your vehicle will main- tain a set speed without controlling the vehicle-to-vehicle distance. Select this mode only when vehicle-to-vehicle distance control mode does not function correctly due to a dirty radar sensor.
Page 347 • The vehicle has been stopped for about 3 minutes. If vehicle-to-vehicle distance control mode is automatically canceled for any other reason, there may be a malfunction in the system. Contact any autho- rized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 348 If constant speed control mode is automatically canceled for any other rea- son, there may be a malfunction in the system. Contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ■ Warning messages and buzzers for dynamic radar cruise control with...
Page 349 4-5. Using the driving support systems ● Vehicles with small rear ends (trailers with no load on board, etc.) ● Motorcycles traveling in the same lane ● When water or snow thrown up by the surrounding vehicles hinders the detecting of the sensor ●...
Page 350 4-5. Using the driving support systems ■ Conditions under which the vehicle-to-vehicle distance control mode may not function correctly In the case of the following conditions, operate the brake pedal (or accelera- tor pedal, depending on the situation) as necessary. As the sensor may not be able to correctly detect vehicles ahead, the system may not operate properly.
Page 351: Control
4-5. Using the driving support systems  Dynamic radar cruise control Summary of functions In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates and decelerates to match the speed changes of the pre- ceding vehicle even if the accelerator pedal is not depressed. In con- stant speed control mode, the vehicle runs at a fixed speed.
Page 352 4-5. Using the driving support systems Color display  Display Indicators Set speed Vehicle-to-vehicle distance switch Cruise control switch WARNING ■ Before using dynamic radar cruise control Driving safely is the sole responsibility of the driver. Do not rely solely on the system, and drive safely by always paying careful attention to your sur- roundings.
Page 353 4-5. Using the driving support systems WARNING ■ Cautions regarding the driving assist systems Observe the following precautions, as there are limitations to the assistance provided by the system. Failure to do so may cause an accident resulting in death or serious injury. ●...
Page 354 4-5. Using the driving support systems WARNING ■ To avoid inadvertent dynamic radar cruise control activation Switch the dynamic radar cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for dynamic radar cruise control Do not use dynamic radar cruise control in any of the following situations. Doing so may result in inappropriate speed control and could cause an acci- dent resulting in death or serious injury.
Page 355 4-5. Using the driving support systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar sensor to detect the presence of vehicles up to approximately 100 m (328 ft.) ahead, determines the current vehicle-to-vehicle following distance, and operates to maintain a suit- able following distance from the vehicle ahead.
Page 356 4-5. Using the driving support systems Example of constant speed cruising When there are no vehicles ahead The vehicle travels at the speed set by the driver. The desired vehicle-to- vehicle distance can also be set by operating the vehicle-to-vehicle dis- tance control.
Page 357 4-5. Using the driving support systems Setting the vehicle speed (vehicle-to-vehicle distance control mode) Monochrome display  Press the “ON-OFF” button to activate the cruise control. Radar cruise control indicator will come on and a message will be displayed on the multi-information display.
Page 358 4-5. Using the driving support systems Color display  Press the “ON-OFF” button to activate the cruise control. Radar cruise control indicator will come on and a message will be displayed on the multi-information display. Press the button again to deacti- vate the cruise control.
Page 359 4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the lever until the desired set speed is displayed. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 360 4-5. Using the driving support systems Changing the vehicle-to-vehicle distance (vehicle-to-vehicle dis- tance control mode) Monochrome display  Pressing the button changes the vehicle-to-vehicle distance as fol- Preceding vehicle mark lows: Long Medium Short The vehicle-to-vehicle distance is set automatically to long mode when the engine switch is turned to the “ON”...
Page 361 4-5. Using the driving support systems Vehicle-to-vehicle distance settings (vehicle-to-vehicle distance control mode) Select a distance from the table below. Note that the distances shown correspond to a vehicle speed of 80 km/h (50 mph). Vehicle-to-vehicle distance increases/decreases in accordance with vehicle speed. Distance options Vehicle-to-vehicle distance Long...
Page 362 4-5. Using the driving support systems Approach warning (vehicle-to-vehicle distance control mode) When your vehicle is too close to a vehicle ahead, and sufficient auto- matic deceleration via the cruise control is not possible, the display will flash and the buzzer will sound to alert the driver. An example of this would be if another driver cuts in front of you while you are follow- ing a vehicle.
Page 363 4-5. Using the driving support systems Selecting constant speed control mode When constant speed control mode is selected, your vehicle will main- tain a set speed without controlling the vehicle-to-vehicle distance. Select this mode only when vehicle-to-vehicle distance control mode does not function correctly due to a dirty radar sensor.
Page 364 4-5. Using the driving support systems Color display  With the cruise control off, press and hold the “ON-OFF” button for 1.5 seconds or more. Immediately after the “ON-OFF” button is pressed, the radar cruise control indicator will come on. Afterwards, it switches to the cruise control indicator.
Page 365 ● Pre-collision braking is activated. If vehicle-to-vehicle distance control mode is automatically canceled for any other reason, there may be a malfunction in the system. Contact any autho- rized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 366 If constant speed control mode is automatically canceled for any other rea- son, there may be a malfunction in the system. Contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ■ Warning messages and buzzers for dynamic radar cruise control Warning messages and buzzers are used to indicate a system malfunction or to inform the driver of the need for caution while driving.
Page 367 4-5. Using the driving support systems ■ When the sensor may not be correctly detecting the vehicle ahead In the case of the following and depending on the conditions, operate the brake pedal when deceleration of the system is insufficient or operate the accelerator pedal when acceleration is required.
Page 368 4-5. Using the driving support systems ■ Conditions under which the vehicle-to-vehicle distance control mode may not function correctly In the case of the following conditions, operate the brake pedal (or accelera- tor pedal, depending on the situation) as necessary. As the sensor may not be able to correctly detect vehicles ahead, the system may not operate properly.
Page 369: Cruise Control
4-5. Using the driving support systems  Cruise control Summary of functions Use the cruise control to maintain a set speed without operating the accelerator pedal. Indicators Set speed (color display only) Cruise control switch  : If equipped C-HR_OM_Europe_OM10528E...
Page 370 4-5. Using the driving support systems Setting the vehicle speed Press the “ON-OFF” button to activate the cruise control. Cruise control indicator will be dis- played on the multi-information dis- play. Press the button again to deacti- vate the cruise control. Accelerate or decelerate, with accelerator pedal operation, to desired...
Page 371 4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 372 If the cruise control speed cannot be set or if the cruise control cancels imme- diately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 373 4-5. Using the driving support systems WARNING ■ To avoid operating the cruise control by mistake Switch the cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
Page 374: Stop & Start System
4-5. Using the driving support systems  Stop & Start system The Stop & Start system stops and restarts the engine according to the clutch pedal operation when the vehicle is stopped. Stop & Start system operation Stopping the engine ■...
Page 375 4-5. Using the driving support systems Disabling the Stop & Start system Press the Stop & Start cancel switch to disable the Stop & Start system. The Stop & Start cancel indicator will come on. Pressing the switch again will enable the Stop &...
Page 376 4-5. Using the driving support systems ■ Operating conditions ● The Stop & Start system is operational when all of the following conditions are met: • The windshield defogger is turned off. • The driver’s seat belt is fastened. • The engine is adequately warmed up. •...
Page 377 4-5. Using the driving support systems ● In the following situations, the engine will restart automatically if the engine is stopped by the Stop & Start system. (To enable stopping of the engine by the Stop & Start system, drive the vehicle.) •...
Page 378 ● Installation and removal of electrical components and wireless devices may affect the Stop & Start system. Contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer for details. ■...
Page 379 4-5. Using the driving support systems ■ Changing the idling stop time with the air conditioning system on The length of time the Stop & Start system will operate when the air condition- ing system is on can be changed by performing the following operation. (The length of time the Stop &...
Page 380 After a refresh charge of approximately 5 to 60 minutes completes, the system can be operated. If the message is displayed continuously (more than 60 seconds), the battery may have deteriorated. Contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 381 A non-dedicated battery for the Stop & Start system may have been installed. “Non-dedicated The Stop & Start system does not operate. battery” Have the vehicle inspected by any autho- rized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 382 4-5. Using the driving support systems ● When the engine automatically restarts while stopped by the Stop & Start system Message Details • The air conditioning system has been turned on or is being used. “For climate control” • has been turned on. The battery charge amount may be low.
Page 383 If “Stop & Start System Malfunction. Visit Your Dealer.” is displayed on the multi-information display The system may be malfunctioning. Have the vehicle inspected by any autho- rized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ■ If the Stop & Start cancel indicator continues to flash The system may be malfunctioning.
Page 384 To ensure the system operates correctly If any of the following situations occur, the Stop & Start system may not operate correctly. Have your vehicle checked by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ●...
Page 385: Driving Mode Select
4-5. Using the driving support systems  Driving mode select In response to driving conditions, one of 3 drive modes can be selected. Select the drive mode Changing the driving mode ■ To select the drive mode, perform operations on the multi-information display.
Page 386 4-5. Using the driving support systems Driving modes ■ ● “NORMAL” mode Provides an optimal balance of fuel economy, quietness, and dynamic performance. Suitable for city driving. ● “SPORT” mode Controls the transmission and engine to provide quick, powerful acceleration. This mode also changes the steering feel, making it suitable for when agile driving response is desired, such as when driving on roads with many curves.
Page 387: Speed Limiter
4-5. Using the driving support systems  Speed limiter Summary of functions A desired maximum speed can be set using the cruise control switch. The speed limiter prevents vehicle speed from exceeding the set speed. Vehicles with monochrome display  Indicator Speed limiter switch Set speed...
Page 388 4-5. Using the driving support systems Setting the vehicle speed Press the switch to activate the speed limiter. Press the switch once more to deactivate the speed limiter. : Vehicles with monochrome display : Vehicles with color display Accelerate or decelerate to the desired speed and push the lever down to set the desired maximum speed.
Page 389 4-5. Using the driving support systems Adjusting the set speed Increase speed Decrease speed Hold the lever until the desired speed setting is obtained. Fine adjustment of the set speed can be made by lightly pushing the lever up or down and releasing it. Canceling and resuming the speed limiter Cancel Pull the lever towards you to can-...
Page 390 If the speed limiter cannot be set, the system may be malfunctioning. Even though the vehicle can be driven normally, have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 391 4-5. Using the driving support systems WARNING ■ To avoid operating the speed limiter by mistake Keep the speed limiter button off when not in use. ■ Situations unsuitable for speed limiter Do not use speed limiter in either of the following situations. Doing so may result in control of the vehicle being lost and could cause an accident resulting in death or serious injury.
Page 392 4-5. Using the driving support systems  BSM (Blind Spot Monitor) Summary of the Blind Spot Monitor The Blind Spot Monitor is a system that has 2 functions; ● The BSM (Blind Spot Monitor) function Assists the driver in making the decision when changing lanes ●...
Page 393 4-5. Using the driving support systems Multi-information display Turning the BSM function/RCTA function on/off. (P. 393) The RCTA function is available when the BSM function is on. RCTA buzzer (RCTA function only) If a vehicle approaching from the right or left at the rear of the vehicle is detected, a buzzer will sound.
Page 394 When “Blind Spot Monitor System Malfunction Visit Your Dealer.” is shown on the multi-information display There may be a sensor malfunction or misaligned. Have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 395 4-5. Using the driving support systems ■ Certification for the Blind Spot Monitor C-HR_OM_Europe_OM10528E...
Page 396 4-5. Using the driving support systems C-HR_OM_Europe_OM10528E...
Page 397 Do not attach accessories or stickers to the sensor or surrounding area on the bumper. ● Do not modify the sensor or surrounding area on the bumper. ● Do not paint the rear bumper any color other than an official Toyota color. C-HR_OM_Europe_OM10528E...
Page 398: Bsm Function
4-5. Using the driving support systems BSM function The BSM function uses radar sensors to detect the following vehicles traveling in adjacent lanes and advises the driver of the presence of such vehicles via the indicators on the outside rear view mirrors. Vehicles that are traveling in areas that are not visible using the out- side rear view mirrors (the blind spots) Vehicles that are approaching rapidly from behind in areas that are...
Page 399 4-5. Using the driving support systems BSM function detection areas The areas that vehicles can be detected in are outlined below. The range of each detection area is: Approximately 0.5 m (1.6 ft.) to 3.5 m (11.5 ft.) from either side of the vehicle : The area between the side of the vehicle and 0.5 m (1.6 ft.) from the side of the vehicle cannot be detected.
Page 400 4-5. Using the driving support systems WARNING ■ Cautions regarding the use of the system The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. The Blind Spot Monitor function is a supplementary function which alerts the driver that a vehicle is present in the blind spot.
Page 401 4-5. Using the driving support systems ■ Conditions under which the BSM function may not function correctly ● The BSM function may not detect vehicles correctly in the following situa- tions: • When the sensor is misaligned due to a strong impact to the sensor or its surrounding area •...
Page 402 4-5. Using the driving support systems ● Instances of the BSM function unnecessarily detecting a vehicle and/or object may increase in the following situations: • When the sensor is misaligned due to a strong impact to the sensor or its surrounding area •...
Page 403: Rcta Function
4-5. Using the driving support systems RCTA function The RCTA functions when your vehicle is in reverse. It can detect other vehicles approaching from the right or left rear of the vehicle. It uses radar sensors to alert the driver of the other vehicle’s existence through flashing the outside rear view mirror indicators and sounding a buzzer.
Page 404 4-5. Using the driving support systems RCTA function detection areas The areas that vehicles can be detected in are outlined below. To give the driver a more consistent time to react, the buzzer can alert for faster vehicles from farther away. Example: Approximate Approaching vehicle...
Page 405 4-5. Using the driving support systems ■ The RCTA function is operational when ● The RCTA function operates when all of the following conditions are met: ● The BSM system is set to on. (P. 393) ● The shift position is in R. ●...
Page 406 4-5. Using the driving support systems ■ Conditions under which the RCTA function may not function correctly ● The RCTA function may not detect vehicles correctly in the following situa- tions: • When the sensor is misaligned due to a strong impact to the sensor or its surrounding area •...
Page 407 4-5. Using the driving support systems • Immediately after the RCTA function is set to on • Immediately after the engine is started with the RCTA function is set to on • When the sensors cannot detect a vehicle due to obstructions ●...
Page 408: Toyota Parking Assist-Sensor
4-5. Using the driving support systems  Toyota parking assist-sensor The distance from your vehicle to nearby obstacles when paral- lel parking or maneuvering into a garage is measured by the sensors and communicated via the multi-information display and a buzzer. Always check the surrounding area when using this system.
Page 409 When enabled, the Toyota park- ing assist-sensor indicator will illuminate. Once turned off, the Toyota parking assist-sensor will remain OFF until it is turned ON again via the screen of the multi-information display. (The system will not automatically turn ON even when the engine is restarted.)
Page 410 4-5. Using the driving support systems The distance display and buzzer When a sensor detects an obstacle, the direction of and the approxi- mate distance to the obstacle are displayed and the buzzer sounds. The volume and timing of the buzzer can be changed. (P. 776) Corner sensors ■...
Page 411 4-5. Using the driving support systems Side sensors ■ Approximate distance to Multi-information Buzzer obstacle display 50 to 37.5 cm Medium (1.6 to 1.2 ft.) 37.5 to 25 cm Fast (1.2 to 0.8 ft.) Less than 25 cm Continuous (0.8 ft.) C-HR_OM_Europe_OM10528E...
Page 412 4-5. Using the driving support systems Center sensors ■ Approximate distance to Multi-information Buzzer obstacle display Front: 100 to 55 cm (3.3 to 1.8 ft.) Slow Rear: 150 to 55 cm (4.9 to 1.8 ft.) 55 to 42.5 cm Medium (1.8 to 1.4 ft.) 42.5 to 30cm Fast...
Page 413 4-5. Using the driving support systems Detection range of the sensors Approximately 100 cm (3.3 ft.) Approximately 150 cm (4.9 ft.) Approximately 50 cm (1.6 ft.) Approximately 50 cm (1.6 ft.) • The detection range is shown in the illustration to the right. How- ever, the sensor will not detect the obstacle if it is too close.
Page 414 4-5. Using the driving support systems ■ The Toyota parking assist-sensor can be operated when Vehicles without a smart entry & start system: The engine switch is in the “ON” position. Vehicles with a smart entry & start system: The engine switch is in IGNITION ON mode.
Page 415 4-5. Using the driving support systems ■ Side area obstacle warning function When an obstacle in the side areas is within the vehicle course while the vehicle is moving forward or backward, this func- tion inform the driver by the display and the buzzer.
Page 416 If “Parking Assist Malfunction” is displayed on the multi-information dis- play The system may not operate due to the malfunction of a sensor. Have the vehicle inspected by any authorized Toyota retailer or Toyota autho- rized repairer, or any reliable repairer. ■...
Page 417 If obstacles draw too close to the sensor. ● The bumper or sensor receives a strong impact. ● A non-genuine Toyota suspension (lowered suspension, etc.) is installed. ● There is another vehicle equipped with parking assist sensors in the vicin- ity.
Page 418 4-5. Using the driving support systems WARNING ■ Side sensors In the following situations, the clearance sonar may not operate normally and may result in an unexpected accident. Drive carefully. ● Obstacles may not be detected in the side areas until the vehicle is driven for a short time and a scan of the side areas is completed.
Page 419 In the following situations, the system may not function correctly due to a sensor malfunction, etc. Have the vehicle checked by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ● Toyota parking assist-sensor operation display flashes, and a beep sounds when no obstacles are detected.
Page 420: S-Ipa (Simple Intelligent Parking Assist System)
4-5. Using the driving support systems S-IPA (Simple Intelligent Parking Assist  System) Function summary The Simple Intelligent Parking Assist System automatically operates the steering wheel to provide support when backing into a target park- ing spot, and when departing from a parallel parking spot. (Shift lever operations and speed adjustment when moving forward or backing up are not performed automatically.) ●...
Page 421 4-5. Using the driving support systems Chart of Simple Intelligent Parking Assist System assist modes and functions Type of Assist mode Function summary See page parking Guidance is provided to detect intended Parallel parking Parallel park- P. 426 parking spot and reach a assist mode position to begin back- ing up from.
Page 422 4-5. Using the driving support systems S-IPA switch and multi-information display S-IPA switch Display Indicator Switching assist mode Switching using the S-IPA switch ■ Press the switch This allows you to switch func- tions and cancel or restart assist modes. While the engine switch is turned to the “ON”...
Page 423 4-5. Using the driving support systems Selecting the assist mode ■ ● Setting for parallel parking and perpendicular parking assist mode Settings can be done at the Parallel parking assist mode following occasion: • The vehicle been driven some distance after Perpendicular parking the engine switch is turned assist mode...
Page 424 4-5. Using the driving support systems ● Settings for exit parallel parking assist mode Settings can be done at the following occasions: Exit parallel parking • Immediately after assist mode engine switch is turned to the “ON” position (vehi- cles without a smart entry &...
Page 425 4-5. Using the driving support systems Guidance screen The guidance screen is displayed on the multi-information display. Clearance sonar display/door position (open/close) display P. 409 Assistance level indicator Displays a gauge indicating the level until the vehicle’s stopping position/the position at which assist control ends.
Page 426 4-5. Using the driving support systems How to parallel park (parallel parking assist mode) Function summary ■ If a parking space can be detected, you will be guided forward until you reach the assist control starting position, and then the parallel parking assist mode can be used.
Page 427 4-5. Using the driving support systems Parking ■ Press the S-IPA switch 1 time and check that the display on the multi-information display switches to parallel parking assist mode. Turn the S-IPA switch on while driving the vehicle at 30 km/h (18 mph) or less.
Page 428 4-5. Using the driving support systems When the multi-information display changes, reduce the vehicle speed. Move the vehicle forward slowly until the buzzer sounds. Stop the vehicle when the buzzer sounds. multi-information display will change. Visually check that the detected space is safe for parking.
Page 429 4-5. Using the driving support systems Shift the shift lever to R. multi-information display will change, S-IPA indicator will come on and automatic steering will begin. While taking care not to get your hands caught up in the steering wheel and checking the safety of the surrounding area, reverse the vehicle slowly by operating the accelerator and...
Page 430 4-5. Using the driving support systems When the buzzer sounds, completely stop the vehicle immediately. multi-information display will change when the buzzer starts sounding. Shift the shift lever to D (Multidrive) or 1 (manual transmission). While the steering wheel is turning, keep the vehicle at a complete stop. When the steering wheel stops turning, move the vehicle forward slowly while checking the safety of the area in front of the vehicle and assis- tance level indicator.
Page 431 4-5. Using the driving support systems When the buzzer sounds, completely stop the vehicle immediately. multi-information display will change when the buzzer starts sounding. Shift the shift lever to R. While the steering wheel is turning, keep the vehicle at a complete stop. When the steering wheel stops turning, reverse the vehicle slowly while checking the safety of the area behind the vehicle and assistance level indicator.
Page 432 4-5. Using the driving support systems ■ Parallel parking assist mode operating conditions ● In order to operate the parallel parking assist mode correctly, drive slowly (at a speed at which the vehicle can be quickly stopped) parallel to the road (or shoulder) while maintaining a distance of approximately 1 m (3.3 ft.) to any parked vehicles.
Page 433 4-5. Using the driving support systems NOTICE ● If the road surface has any dips or inclines, the target parking spot cannot be correctly set. Therefore, the vehicle may be parked at an angle or may deviate from the parking spot. In these cases, do not use the parallel park- ing assist mode.
Page 434 4-5. Using the driving support systems How to park next to other vehicles (perpendicular parking assist mode) Function summary ■ Stop so that the center of the target parking spot appears nearly perpendicular to the vehicle. If the space is detectable, the forward guidance function can be used.
Page 435 4-5. Using the driving support systems Parking ■ Press S-IPA switch 2 times and check that the display on the multi-informa- tion display switches to per- pendicular parking assist mode. Turn the S-IPA switch on while driving the vehicle at 20 km/h (12 mph) or less.
Page 436 4-5. Using the driving support systems When the multi-information display changes, reduce the vehicle speed. Move the vehicle forward slowly until the buzzer sounds. Stop the vehicle when the buzzer sounds. multi-information display will change. Visually check that the detected space is safe for parking.
Page 437 4-5. Using the driving support systems Shift the shift lever to R. multi-information display will change, S-IPA indicator will come on and automatic steering will begin. While taking care not to get your hands caught up in the steering wheel and checking the safety of the surrounding area, reverse the vehicle slowly by operating the accelerator and...
Page 438 4-5. Using the driving support systems When the buzzer sounds, completely stop the vehicle immediately. multi-information display will change when the buzzer starts sounding. Shift the shift lever to D (Multidrive) or 1 (manual transmission). While the steering wheel is turning, keep the vehicle at a complete stop. When the steering wheel stops turning, move the vehicle forward slowly while checking the safety of the area in front of the vehicle and assis- tance level indicator.
Page 439 4-5. Using the driving support systems Shift the shift lever to R. While the steering wheel is turning, keep the vehicle at a complete stop. When the steering wheel stops turning, reverse the vehicle slowly while checking the safety of the area behind the vehicle and assistance level indicator.
Page 440 4-5. Using the driving support systems ● The vehicle can be parked in a parking space between 2 vehicles and a space behind a parked vehicle. ■ Tips for using the perpendicular parking assist mode Leave a gap of approximately 1 m (3.3 ft.) from any parked vehicles and approach the target parking spot.
Page 441 4-5. Using the driving support systems NOTICE ● If the road surface has any dips or inclines, the target parking spot cannot be correctly set. Therefore, the vehicle may be parked at an angle or may deviate from the parking spot. In these cases, do not use the perpendicu- lar parking assist mode.
Page 442 4-5. Using the driving support systems How to depart from a parallel parking position (exit parallel park- ing assist mode) Function summary ■ When departing from a parallel parking position, select the direction you would like to depart in, and steering wheel operation assist con- trol will be provided to guide the vehicle to a position from which you can take off.
Page 443 4-5. Using the driving support systems Using the exit parallel parking assist mode to depart ■ Press the S-IPA switch and check that the display on the multi-information display switches to exit parallel park- ing assist mode. Operate the turn signal lever to select whether you would like to depart to the left or right.
Page 444 4-5. Using the driving support systems Shift the shift lever to R. The multi-information display will change, S-IPA indicator will come on and automatic steering will begin. While taking care not to get your hands caught up in the steering wheel and checking the safety of the surrounding area, reverse the vehicle slowly by operating the accelera- tor and brake pedals.
Page 445 4-5. Using the driving support systems When the buzzer sounds, completely stop the vehicle immediately. multi-information display will change when the buzzer starts sounding. Shift the shift lever to D (Multidrive) or 1 (manual transmission). While the steering wheel is turning, keep the vehicle at a complete stop. When the steering wheel stops turning, move the vehicle forward slowly while checking the safety of the area in front of the vehicle and assis- tance level indicator.
Page 446 4-5. Using the driving support systems When the buzzer sounds, completely stop the vehicle immediately. multi-information display will change when the buzzer starts sounding. Shift the shift lever to R. While the steering wheel is turning, keep the vehicle at a complete stop. When the steering wheel stops turning, move the vehicle forward slowly while checking the safety of the area in front of the vehicle and assis- tance level indicator.
Page 447 4-5. Using the driving support systems ■ Exit parallel parking assist mode ● During assist control, if the driver determines that they are at a position where take-off is possible and operates the steering wheel, assist control is stopped at that position. ●...
Page 448 Multi-information display messages Message Cause What to do Have vehicle inspected authorized Toyota “IPA Malfunction. Visit System malfunction. retailer or Toyota autho- Your Dealer.” rized repairer, or any reliable repairer imme- diately. Reduce vehicle speed. • Perpendicular park- assist mode: “IPA...
Page 449 4-5. Using the driving support systems Message Cause What to do The S-IPA switch was Turn the S-IPA switch turned off. Turn the engine switch power steering off, wait for a little temporarily over- while, and then start heated. the engine again. vehicle moved during...
Page 450 Have vehicle inspected “IPA Cancelled, Take Possible system mal- authorized Toyota Over. IPA Malfunction.” function. retailer or Toyota autho- rized repairer, or any reliable repairer. The steering wheel was “IPA Cancelled, Take Park the vehicle manu- manually operated Over. Driver...
Page 451 4-5. Using the driving support systems Message Cause What to do “IPA Cancelled, Take The VSC off switch was Turn the VSC off switch Over. TRC/VSC is Off.” turned off. • If the operation was canceled during detection of a parking space, turn the S-IPA switch on again.
Page 452 (22 mph) or higher. Have vehicle inspected Possible system mal- authorized Toyota function. retailer or Toyota autho- rized repairer, or any reliable repairer. In such cases, clearing A sensor may be dirty sensor should or covered with snow or return the system to ice.
Page 453 4-5. Using the driving support systems Message Cause What to do Reduce vehicle speed and turn S-IPA switch on. • Perpendicular park- Excessive vehicle “IPA Unavailable, assist mode: speed (over 50 km/h Speed Too High.” 20 km/h (12 mph) or [31 mph]) less •...
Page 454 4-5. Using the driving support systems Precautions during use Sensors ■ Detect a parking space according the vehicles parked in front and behind a parking space (parallel parking) or left and right of a park- ing space (perpendicular parking). Front side sensors Rear side sensors C-HR_OM_Europe_OM10528E...
Page 455 4-5. Using the driving support systems ● The sensor detection range when using perpendicular parking assist mode Intended parking spot ● The sensor detection range when using parallel parking assist mode Intended parking spot C-HR_OM_Europe_OM10528E...
Page 456 4-5. Using the driving support systems ● When there is a parked vehicle behind the target parking spot, it may not be detected due to the distance. Also, depending on the shape of the vehicle and other conditions, the detectable range may shorten or detection may not be possible.
Page 457 4-5. Using the driving support systems WARNING ● Do not rely solely upon the Simple Intelligent Parking Assist System. As with unequipped vehicles, move forward and back up carefully while directly confirming the safety of your surroundings and the area to the rear of the vehicle.
Page 458 • Using tire chains or compact spare tire (if equipped) ● Do not use tire other than that provided by the manufacturer. The system may not operate properly. When replacing tires, contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 459 • There are road heaters installed in the parking lot to prevent the road surface from freezing. In any other situations when the set position and vehicle position greatly differ, have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ●...
Page 460 4-5. Using the driving support systems WARNING ● In the following situations, the sensors may not operate normally and may lead to an accident. Drive carefully. • Obstacles cannot be detected in the side areas until a scan of the side areas is completed.
Page 461 4-5. Using the driving support systems NOTICE ■ When using the S-IPA ● Check that the parking space is suitable. (Width of the space, if there are any obstacles, road surface condition, etc.) ● S-IPA will not operate properly if the vehicle at the front or back of the parking space moves, or if an obstacle enters the parking space after the sensors have detected the parking space.
Page 462: Driving Assist Systems
4-5. Using the driving support systems Driving assist systems To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supple- mentary and should not be relied upon too heavily when operat- ing the vehicle.
Page 463 4-5. Using the driving support systems ◆ Dynamic Torque Control AWD system (AWD models) Automatically switches from front-wheel drive to four-wheel drive (AWD) according to the driving conditions, helping to ensure reli- able handling and stability. Examples of conditions where the sys- tem will switch to AWD are when cornering, going uphill, starting off or accelerating, and when the road surface is slippery due to snow, rain, etc.
Page 464 When the message is displayed on the multi-information display show- ing that TRC has been disabled even if has not been pressed TRC cannot be operated. Contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 465 4-5. Using the driving support systems ■ Sounds and vibrations caused by the ABS, brake assist, VSC, TRC and hill-start assist control systems ● A sound may be heard from the engine compartment when the brake pedal is depressed repeatedly, when the engine is started or just after the vehicle begins to move.
Page 466 4-5. Using the driving support systems ■ Operating conditions of hill-start assist control When the following four conditions are met, the hill-start assist control will operate: ● Vehicles with a Multidrive: The shift lever is in a position other than P or N (when starting off forward/backward on an upward incline).
Page 467 4-5. Using the driving support systems WARNING ■ The ABS does not operate effectively when ● The limits of tire gripping performance have been exceeded (such as excessively worn tires on a snow covered road). ● The vehicle hydroplanes while driving at high speed on wet or slick roads. ■...
Page 468 The ABS, TRC and VSC systems will not function correctly if different tires are installed on the vehicle. Contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer for further information when replacing tires or wheels. ■...
Page 469 4-5. Using the driving support systems WARNING ■ If trailer sway occurs Observe the following precautions. Failing to do so may cause death or serious injury. ● Firmly grip the steering wheel. Steer straight ahead. Do not try to control trailer swaying by turning the steering wheel. ●...
Page 470: Winter Driving Tips
4-6. Driving tips Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a man- ner appropriate to the prevailing weather conditions. Preparation for winter ● Use fluids that are appropriate to the prevailing outside tempera- tures.
Page 471 4-6. Driving tips Before driving the vehicle Perform the following according to the driving conditions: ● Do not try to forcibly open a window or move a wiper that is frozen. Pour warm water over the frozen area to melt the ice. Wipe away the water immediately to prevent it from freezing.
Page 472 If the shift lever can be shifted from P, there may be a problem with the shift lock system. Have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer immediately.
Page 473 4-6. Driving tips Selecting tire chains 16-inch and 17-inch tires  Use the correct tire chain size when mounting the tire chains. Chain size is regulated for each tire size. Side chain: 3 mm (0.12 in.) in diameter 10 mm (0.39 in.) in width 30 mm (1.18 in.) in length Cross chain: 4 mm (0.16 in.) in diameter...
Page 474 4-6. Driving tips ■ Tire chain installation Observe the following precautions when installing and removing chains: ● Install and remove tire chains in a safe location. ● Install tire chains on the front tires. Do not install tire chains on the rear tires. ●...
Page 475 NOTICE ■ Repairing or replacing snow tires Request repairs or replacement of snow tires from any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer or legitimate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 476 4-6. Driving tips C-HR_OM_Europe_OM10528E...
Page 477 Audio system ® 5-1. Basic Operations 5-6. Using Bluetooth devices Audio system types ...478 ® Bluetooth audio/phone..523 Steering wheel audio switches......480 Using the steering wheel switches ....530 AUX port/USB port ....481 ® Registering a Bluetooth 5-2. Using the audio system device ......531 Optimal use of the audio 5-7.
Page 478: Audio System Types
5-1. Basic Operations  Audio system types Vehicles with multimedia system or navigation system  Owners of models equipped with a multimedia system or navigation system should refer to the “Navigation and multimedia system Owner’s manual”. Vehicles without multimedia system or navigation system ...
Page 479 5-1. Basic Operations ● Type B ■ Using cellular phones Interference may be heard through the audio system’s speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating. NOTICE ■ To prevent battery discharge Do not leave the audio system on longer than necessary when the engine is stopped.
Page 480: Steering Wheel Audio Switches
5-1. Basic Operations  Steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system or navigation system. For details, refer to the manual provided with the audio system or navigation system.
Page 481: Aux Port/Usb Port
5-1. Basic Operations AUX port/USB port Connect an iPod, USB memory device or portable audio player to the AUX port/USB port as indicated below. Press the “MEDIA” (Type A) or “MODE” (Type B) button to select “iPod”, “USB” or “AUX”. Connecting using the AUX port/USB port Type A Type B...
Page 482: Optimal Use Of The Audio System
5-2. Using the audio system Optimal use of the audio system The sound quality, volume balance and ASL settings can be adjusted. Type A Type B   Displays the “SETUP” menu Changes the following settings • Sound quality and volume balance P.
Page 483 5-2. Using the audio system Using the audio control function Changing sound quality modes ■ Press the “SETUP” button (Type A), or the tune/scroll knob (Type Turn the knob to select “Sound Setting”. Press the knob. Turn the knob as corresponds to the desired mode. “BASS”, “TREBLE”, “FADER”, “BALANCE”, or “ASL”...
Page 484 5-2. Using the audio system Adjusting the Automatic Sound Levelizer (ASL) ■ Type A  When ASL is selected, turning the tune/scroll knob to the right changes the amount of ASL in the order of LOW, MID and HIGH. Turning the knob to the left turns ASL off. ASL automatically adjusts the volume and tone quality according to vehicle speed.
Page 485 5-3. Using the radio Radio operation Press the “RADIO” (Type A) or “MODE” (Type B) button until “AM” or “FM” is displayed. Type A  AF/region code/TA mode setup AM/FM mode button Tune/scroll knob Displaying station list Adjusting frequency Seeking the frequency selecting items Power/volume knob Back button...
Page 486 5-3. Using the radio Type B  AM/FM mode button Station selectors Tune/scroll knob Power/volume knob Adjusting the frequency Press: Turning the audio sys- tem on or off Seeking the frequency Turn: Adjusting the volume Setting station presets Search for desired stations by turning the tune/scroll knob or press- ing “”...
Page 487 5-3. Using the radio Using the station list (Type A only) Updating the station list ■ Press the “LIST” button (Type A). The station list will be displayed. Press (“UPDATE”) to update the list. “Updating” is displayed while the searching is in process, and then avail- able stations will be listed on the display.
Page 488 5-3. Using the radio RDS (Radio Data System) (Type A only) This feature allows your radio to receive station. Listening to stations of the same network ■ Press the “SETUP” button. Turn the tune/scroll knob to “RADIO” and press the knob. Turn the knob as corresponds to the desired mode: “FM AF”...
Page 489 5-3. Using the radio ■ EON (Enhanced Other Network) system (for traffic announcement func- (Type A only) tion) If the RDS station (with EON data) you are listening to is not broadcasting a traffic information program and the audio system is in the TA (traffic announcement) mode, the radio will be switched automatically to a station broadcasting a traffic information program in the EON AF list when traffic information begins.
Page 490: Cd Player Operation
5-4. Playing an audio CD and MP3/WMA discs CD player operation Insert a disc, press the “MEDIA” (Type A) or “MODE” (Type B) button to begin listening to a CD. Type A  Disc eject Changing the audio source/ playback Tune/scroll knob Selecting a track/file or display- Selecting a folder (MP3/WMA...
Page 491 5-4. Playing an audio CD and MP3/WMA discs Type B  Disc eject Repeat play Changing the audio source/ Selecting a folder (MP3/WMA playback discs only) Tune/scroll knob Displaying track/folder list Selecting a track/file Displaying text message Selecting a track/file, fast-for- Power/volume knob warding or rewinding Press: Turning the audio sys-...
Page 492 5-4. Playing an audio CD and MP3/WMA discs Loading CDs or MP3 and WMA discs Insert a disc. Ejecting CDs or MP3 and WMA discs Press the disc eject button and remove the disc. Using the CD player Selecting a track ■...
Page 493 5-4. Playing an audio CD and MP3/WMA discs Random play ■ Press (“RDM”). To cancel, press the button again. ■ Repeat play Press (“RPT”). To cancel, press the button again. Switching the display ■ Type A  Press the tune/scroll knob. Track title, Artist name and CD title are shown on the display.
Page 494 5-4. Playing an audio CD and MP3/WMA discs Playing back MP3 and WMA discs Selecting folders one at a time ■ Press (“<FOLDER”) or (“FOLDER>”) to select the desired folder. Selecting a folder and file from folder list ■ Press the “LIST” button (Type A) or (“LIST”) (Type B).
Page 495 5-4. Playing an audio CD and MP3/WMA discs Fast-forwarding and rewinding files ■ To fast-forward or rewind, press and hold “” or “” on the “SEEK TRACK” button (Type A), or the “<” or “>” button of “SEEK TRACK” (Type B). Random playback ■...
Page 496 Error messages If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. Message...
Page 497 5-4. Playing an audio CD and MP3/WMA discs ■ Discs that can be used Discs with the marks shown below can be used. Playback may not be possible depending on recording format or disc fea- tures, or due to scratches, dirt or deterioration. CDs with copy-protect features may not play correctly.
Page 498 5-4. Playing an audio CD and MP3/WMA discs ● MP3 file compatibility • Compatible standards MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER3) • Compatible sampling frequencies MPEG1 LAYER3: 32, 44.1, 48 (kHz) MPEG2 LSF LAYER3: 16, 22.05, 24 (kHz) • Compatible bit rates (compatible with VBR) Type A ...
Page 499 5-4. Playing an audio CD and MP3/WMA discs ● Compatible media Media that can be used for MP3 and WMA playback are CD-Rs and CD- RWs. Playback in some instances may not be possible, depending on the status of the CD-R or CD-RW. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints.
Page 500 5-4. Playing an audio CD and MP3/WMA discs ● ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3, 2.4 (Type B) ID3 tags.
Page 501 5-4. Playing an audio CD and MP3/WMA discs WARNING ■ Certification for the CD player CAUTION: THIS PRODUCT IS A CLASS 1 LASER PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Page 502 5-4. Playing an audio CD and MP3/WMA discs NOTICE ■ Discs and adapters that cannot be used Do not use the following types of discs. Also, do not use 8 cm (3 in.) disc adapters, DualDiscs or printable discs. Doing so may damage the player and/or the disc insert/eject function. ●...
Page 503: Listening To An Ipod
5-5. Using an external device Listening to an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. Press the “MEDIA” (Type A) or “MODE” (Type B) but- ton until “iPod” is displayed. Connecting an iPod P. 481 Control panel Type A ...
Page 504 5-5. Using an external device Type B  Changing the audio source/ iPod menu mode, playback playback Displaying song list Tune/scroll knob Displaying text message Selecting an iPod menu/song Power/volume knob Selecting a song, fast-forward- Press: Turning the audio sys- ing or rewinding tem on or off Random play or back button...
Page 505 5-5. Using an external device Selecting a play mode Press (“MENU”) to select iPod menu mode. Turning the tune/scroll knob clockwise changes the play mode in the following order: “Playlists”“Artists”“Albums”“Songs”“Podcasts”“Genres” “Composers”“Audiobooks” Press the knob to select the desired play mode. ■...
Page 506 5-5. Using an external device Selecting a list ■ Type A  Turn the tune/scroll knob to display the first selection list. Press the knob to select the desired item. Pressing the knob changes to the second selection list. Repeat the same procedure to select the desired item. To return to the previous selection list, press the back button.
Page 507 5-5. Using an external device Fast-forwarding and rewinding songs Press and hold “” or “” on the “SEEK TRACK” button (Type A), or the “<” or “>” button of “SEEK TRACK” (Type B). Random play Pressing (“RDM”) changes modes in the following order: Track RandomAlbum RandomOff.
Page 508 5-5. Using an external device ■ About iPod ● “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance stan- dards.
Page 509 Error messages If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. Message...
Page 510 5-5. Using an external device ■ Compatible models ® ® ® ® ® The following iPod , iPod nano , iPod classic , iPod touch and iPhone devices can be used with this system. ● Made for • iPod touch (5th generation) (Type B only) •...
Page 511 5-5. Using an external device WARNING ■ Caution while driving Do not connect iPod or operate the controls. Doing so may cause an accident, resulting in death or serious injury. NOTICE ■ To prevent damage to iPod or its terminal ●...
Page 512: Listening Usb Memory Device
5-5. Using an external device Listening USB memory device Connecting a USB memory enables you to enjoy music from the vehicle speakers. Press the “MEDIA” (Type A) or “MODE” (Type B) button until “USB” is displayed. Connecting a USB memory P.
Page 513 5-5. Using an external device Type B  Changing the audio source/ Selecting a folder playback Displaying folder list Tune/scroll knob Displaying text message Selecting a file Power/volume knob Selecting a file, fast-forwarding Press: Turning the audio sys- or rewinding tem on or off Random play or back button Turn: Adjusting the volume...
Page 514 5-5. Using an external device Selecting a folder Selecting folders one at a time ■ Press (“<FOLDER”) or (“FOLDER>”) to select the desired folder. Selecting a folder and file from folder list ■ Press the “LIST” button (Type A) or (“LIST”) (Type B).
Page 515 5-5. Using an external device Random play Pressing (“RDM”) changes modes in the following order: Folder randomDisc randomOff Repeat play Pressing (“RPT”) changes modes in the following order: Off File repeatFolder repeat : Available except when RDM (random play) is selected Switching the display Type A ...
Page 516 Error messages If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. Message...
Page 517 5-5. Using an external device ■ USB memory ● Compatible devices USB memory that can be used for MP3 and WMA playback ● Compatible device formats The following device formats can be used: • USB communication formats: USB2.0 FS (12mbps) •...
Page 518 5-5. Using an external device ● MP3 file compatibility Type A  • Compatible standards MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III, MPEG2.5) • Compatible sampling frequencies MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz) MPEG2 AUDIO LAYERII, III: 16, 22.05, 24 (kHz) MPEG2.5: 8, 11.025, 12 (kHz) •...
Page 519 5-5. Using an external device ● WMA file compatibility Type A  • Compatible standards WMA Ver. 9 • Compatible sampling frequencies HIGH PROFILE 32, 44.1, 48 (kHz) • Compatible bit rates HIGH PROFILE 32-320 (kbps, VBR) Type B  •...
Page 520 5-5. Using an external device ● MP3 and WMA playback • When a device containing MP3 or WMA files is connected, all files in the USB memory are checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we rec- ommend that you do not include any files other than MP3 or WMA files or create any unnecessary folders.
Page 521 5-5. Using an external device WARNING ■ Caution while driving Do not connect USB memory or operate the controls. Doing so may cause an accident, resulting in death or serious injury. NOTICE ■ To prevent damage to USB memory or its terminal ●...
Page 522: Using The Aux Port
5-5. Using an external device Using the AUX port This port can be used to connect a portable audio device and lis- ten to it using the vehicle’s speakers. Press the “MEDIA” (Type A) or “MODE” (Type B)” button until “AUX” is displayed. Connecting a portable player P.
Page 523 ® 5-6. Using Bluetooth devices ® Bluetooth audio/phone ® The following can be performed using Bluetooth wireless com- munication: ◆ ® Bluetooth audio ® The Bluetooth audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication.
Page 524 ® 5-6. Using Bluetooth devices Device registration/connection flow ® 1. Register the Bluetooth device to be used with audio system (P. 531) ® 2. Connect the registered Bluetooth device to be used (P. 532, 533) 3. Set automatic connection of the device (P.
Page 525 ® 5-6. Using Bluetooth devices Audio unit Type A  ® Bluetooth connection condi- tion If “BT” is not displayed, the ® Bluetooth audio/phone cannot be used. Displays set up menu Tune/scroll knob Selects items such as menu and number Turn: Selects an item Press: Inputs the selected item Press and hold: Displays information that is too long to be dis-...
Page 526 ® 5-6. Using Bluetooth devices Type B  Power/volume knob Press: Turning the audio sys- tem on or off Turn: Adjusting the volume ® Bluetooth connection condi- tion If “BT” is not displayed, the ® Bluetooth audio/phone cannot be used. Display A message, name, number, etc., is displayed.
Page 527 ® 5-6. Using Bluetooth devices Microphone C-HR_OM_Europe_OM10528E...
Page 528 ® 5-6. Using Bluetooth devices ® Menu list of the Bluetooth audio/phone To enter a menu, press the tune/scroll knob and navigate menus by using the knob. First menu Second menu Third menu Operation details Registering “Pairing” ® Bluetooth device Listing the regis- “List phone”...
Page 529 ® 5-6. Using Bluetooth devices First menu Second menu Third menu Operation details Adding a new num- “Add contacts” Registering a speed “Add SD” dial Deleting a number “Delete call stored in the call his- history” “Phonebook” tory Deleting a number “Delete contacts”...
Page 530: Using The Steering Wheel Switches
® 5-6. Using Bluetooth devices  Using the steering wheel switches The steering wheel switches can be used to operate a connected cellular phone, or portable digital audio player (portable player). ® Operating Bluetooth phone using the steering wheel switches Volume The voice guidance volume cannot be adjusted using this...
Page 531 ® 5-6. Using Bluetooth devices ® Registering a Bluetooth device ® Before using the Bluetooth audio/phone, it is necessary to reg- ® ister a Bluetooth device in the system. Follow the procedure below to register (pair) a device: ® How to register a Bluetooth device Press the “SETUP”...
Page 532: Using The "Setup" Menu
5-7. “SETUP” menu Using the “SETUP” menu (“Bluetooth*” menu) ® Registering a Bluetooth device in the system allows the system to function. The following functions can be used for registered devices: Registering a portable player Select “Pairing” using the tune/scroll knob (P. 528), and perform the procedure for registering a portable player.
Page 533 5-7. “SETUP” menu Type B  ● Disconnecting the registered cellular phone from the audio system Select the name of the cellular phone to be disconnected using the tune/scroll knob. Select “Disconnect” using the knob. Press (“YES”). Listing the registered portable players Select “List audio”...
Page 534 5-7. “SETUP” menu Type B  ● Disconnecting the registered portable player from the audio system Select the name of the portable player to be disconnected using the tune/scroll knob. Select “Disconnect” using the knob. Press (“YES”). Type B  ●...
Page 535 5-7. “SETUP” menu Setting automatic connection of the device on or off If “BT power” is set to on, the registered device will be connected automatically when the engine switch is turned to the “ACC” position (vehicles without smart entry & start system) or ACCESSORY mode (vehicles with smart entry &...
Page 536 5-7. “SETUP” menu Initialization Select “Reset” or “Initialize” using the tune/scroll knob. (P. 528) ● Initializing the sound settings Select “Sound Setting” using the tune/scroll knob and press (“YES”). For details about sound settings: P. 482 ● Initializing the device information Select “Car Device Info”...
Page 537 5-7. “SETUP” menu Using the “SETUP” menu (“PHONE” or “TEL” menu) Adding a new phone number Select “Add contacts” using the tune/scroll knob. (P. 528) ● Transferring all contacts from the cellular phone Select “Overwrite all” using the knob and press (“YES”).
Page 538 5-7. “SETUP” menu Deleting call histories Select “Delete call history” using the tune/scroll knob. (P. 528) ● Deleting outgoing call history Select “Outgoing Calls” using the tune/scroll knob. Select the desired phone number using the knob and press (“YES”). To delete all outgoing call history data, press (“ALL”) and then press (“YES”).
Page 539 5-7. “SETUP” menu Deleting a registered phone number Select “Delete contacts” using the tune/scroll knob. (P. 528) Select the desired phone number using the knob and press (“YES”). To delete all the registered phone numbers, select “All delete” using the knob and press (“YES”).
Page 540 5-7. “SETUP” menu Setting ring tone volume Select “Ring tone volume” using the tune/scroll knob. (P. 528) Change the ring tone volume. To decrease the volume: Turn the knob counterclockwise. To increase the volume: Turn the knob clockwise. Type B ...
Page 541 ® 5-8. Bluetooth Audio ® Operating a Bluetooth enabled portable player Type A  Tune/scroll knob Selecting an album Selecting a track or displays Playback/pause text message Selecting a track, fast-forward- Back button ing or rewinding Random play Power/volume knob Repeat play Press: Turning the audio sys- tem on or off...
Page 542 ® 5-8. Bluetooth Audio Type B  Changing the audio source/ Playback/pause playback Displaying text message Selecting a track, fast-forward- Power/volume knob ing or rewinding Press: Turning the audio sys- Random play or back button tem on or off Turn: Adjusting the volume Repeat play Selecting an album C-HR_OM_Europe_OM10528E...
Page 543 ® 5-8. Bluetooth Audio Selecting and scanning an album Selecting an album ■ Press (“<FOLDER”) or (“FOLDER>”) to select the desired album. Scanning the first track of all the album (Type A only) ■ Press and hold the “SCAN” button until you hear a beep. The first 10 seconds of the first track in each album will be played.
Page 544 ® 5-8. Bluetooth Audio Playing and pausing tracks Press Switching the display Type A  Press the tune/scroll knob Track title, Artist name and Album title are shown on the display. To return to the previous display, press the knob or the back button. Type B ...
Page 545: Making A Phone Call
® 5-9. Bluetooth Phone Making a phone call To enter the “PHONE” or “TEL” mode, press the off-hook switch. Dialing by selecting a name Select “Phonebook” using the tune/scroll knob. Select the desired name using the knob and press the off-hook switch.
Page 546 ® 5-9. Bluetooth Phone Dialing from call histories Select “All calls”, “Missed calls”, “Incoming calls” or “Outgoing calls” using the tune/scroll knob. Select a desired number using the knob and press the off-hook switch. The following operations can be performed: ●...
Page 547: Receiving A Phone Call
® 5-9. Bluetooth Phone Receiving a phone call Answering the phone Press the off-hook switch. Refusing the call Press the on-hook switch. Receiving a call when on another call Press the off-hook switch. Pressing the off-hook switch again returns you to the previous call. Adjusting the ring tone volume when receiving a call To decrease the volume: Turn the power/volume knob counterclock- wise.
Page 548: Speaking On The Phone
® 5-9. Bluetooth Phone Speaking on the phone Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the following methods: a. Operate the cellular phone. Refer to the manual that comes with the cellular phone for the operation of the phone.
Page 549 ® 5-9. Bluetooth Phone ■ When talking on the phone ● Do not talk simultaneously with the other party. ● Keep the volume of the received voice down. Otherwise, voice echo will increase. ■ Automatic volume adjustment When vehicle speed is 80 km/h (50 mph) or more, the volume automatically increases.
Page 550: Bluetooth Bluetooth
® 5-10. Bluetooth ® Bluetooth ® ■ When using the Bluetooth audio/phone ● In the following situations, the system may not function. ® • The portable player does not support Bluetooth • The cellular phone is located outside the service area ®...
Page 551 ® 5-10. Bluetooth ® ■ About Bluetooth Bluetooth is a registered trademark of Bluetooth SIG, Inc. ■ Compatible models ® ● Bluetooth specifications: Ver. 1.1, or higher (Recommended: Ver. 2.1 + EDR or higher) ● Following Profiles: • A2DP (Advanced Audio Distribution Profile) Ver. 1.0 or higher (recom- mended: Ver.
Page 552 ® 5-10. Bluetooth ■ Certification C-HR_OM_Europe_OM10528E...
Page 553 ® 5-10. Bluetooth C-HR_OM_Europe_OM10528E...
Page 554 ® 5-10. Bluetooth C-HR_OM_Europe_OM10528E...
Page 555 ® 5-10. Bluetooth C-HR_OM_Europe_OM10528E...
Page 556 ® 5-10. Bluetooth C-HR_OM_Europe_OM10528E...
Page 557 ® 5-10. Bluetooth WARNING ■ Caution while driving Observe the following precautions to avoid an accident that could result in death or serious injuries. ● Do not use a cellular phone. ® ● Do not connect Bluetooth device or operate the controls. ■...
Page 558 ® 5-10. Bluetooth C-HR_OM_Europe_OM10528E...
Page 559 Interior features 6-1. Using the air conditioning 6-4. Using the other interior system and defogger features Manual air conditioning Other interior features..595 system ......560 • Sun visors......595 • Vanity mirrors ....595 Automatic air • Clock ......596 conditioning system ..566 • Power outlet ....597 Heated steering •...
Page 560: Manual Air Conditioning System
6-1. Using the air conditioning system and defogger  Manual air conditioning system Air conditioning controls The illustrations below are for left-hand drive vehicles. The button positions and shapes will differ for right-hand drive vehi- cles. Adjusting the temperature setting ■...
Page 561 6-1. Using the air conditioning system and defogger Fan speed setting ■ Increases the fan speed Decreases the fan speed Press to turn the fan off. Change the airflow mode ■ To change the airflow mode, move the airflow change knob upward or downward.
Page 562 6-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes ■ Press The mode switches between outside air mode (indicator off) and recir- culated air mode (indicator on) each time is pressed. Defogging the windshield ■...
Page 563 6-1. Using the air conditioning system and defogger Air outlets Location of air outlets ■ The air outlets and air volume change according selected airflow mode. (P. 561) : Some models Adjusting the position of and opening and closing the air out- ■...
Page 564 6-1. Using the air conditioning system and defogger ■ Fogging up of the windows ● The windows will easily fog up when the humidity in the vehicle is high. Pressing on will dehumidify the air from the outlets and defog the windshield effectively.
Page 565 6-1. Using the air conditioning system and defogger WARNING ■ To prevent the windshield from fogging up ● Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, block- ing your vision.
Page 566: Automatic Air Conditioning System
6-1. Using the air conditioning system and defogger  Automatic air conditioning system Air outlets and fan speed are automatically adjusted according to the temperature setting. Air conditioning controls The illustrations below are for left-hand drive vehicles. The button positions and shapes will differ for right-hand drive vehi- cles.
Page 567 6-1. Using the air conditioning system and defogger Fan speed setting ■ Increases the fan speed Decreases the fan speed Press to turn the fan off. Change the airflow mode ■ To change the airflow mode, move the airflow change knob upward or downward.
Page 568 6-1. Using the air conditioning system and defogger Using automatic mode Press The dehumidification function begins to operate. Air outlets and fan speed are automatically adjusted according to the temperature set- ting. Adjust the temperature setting. To stop the operation, press Automatic mode indicator ■...
Page 569 6-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes ■ Press The mode switches between outside air mode (indicator off) and recir- culated air mode (indicator on) each time is pressed. Defogging the windshield ■...
Page 570 6-1. Using the air conditioning system and defogger Windshield wiper de-icer (if equipped) ■ This feature is used to prevent ice from building up on the wind- shield and wiper blades. Press The windshield wiper de-icer will automatically turn off after a period of time.
Page 571 6-1. Using the air conditioning system and defogger Air outlets Location of air outlets ■ The air outlets and air volume change according selected airflow mode. (P. 567) : Some models Adjusting the position of and opening and closing the air out- ■...
Page 572 6-1. Using the air conditioning system and defogger ■ Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed.
Page 573 6-1. Using the air conditioning system and defogger ■ Operation of the air conditioning system in Eco drive mode ● In Eco drive mode, the air conditioning system is controlled as follows to pri- oritize fuel efficiency: • Engine speed and compressor operation controlled to restrict heating/ cooling capacity •...
Page 574 6-1. Using the air conditioning system and defogger ■ nanoe™ (if equipped) The air conditioning system adopts nanoe™ technology. This helps to fill the cabin with refreshing air by emitting slightly acidic nanoe™ coated with water particles through the passenger’s side vent ●...
Page 575 ■ nanoe™ generator (if equipped) Do not disassemble or repair the generator because it contains high voltage parts. Contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer if the generator needs repair. C-HR_OM_Europe_OM10528E...
Page 576 6-1. Using the air conditioning system and defogger NOTICE ■ To prevent battery discharge Do not leave the air conditioning system on longer than necessary when the engine is stopped. ■ To prevent damage to the nanoe™ (if equipped) Do not insert anything into the driver's side vent, attach anything to it, or use sprays around the driver's side vent.
Page 577 6-1. Using the air conditioning system and defogger   Heated steering wheel /seat heaters Heated steering wheel and seat heaters heat the side grips of the steering wheel and seats, respectively. WARNING ● Care should be taken to prevent injury if anyone in the following categories comes in contact with the steering wheel and seats when the heater is on: •...
Page 578 6-1. Using the air conditioning system and defogger Heated steering wheel Turns the heated steering wheel on/off The indicator light comes on when the heated steering wheel is operating. Left-hand drive vehicles Right-hand drive vehicles   ■ Operating condition Vehicles without a smart entry &...
Page 579 6-1. Using the air conditioning system and defogger Seat heaters Each time the switch is pressed, the operation condition changes as follows. Hi (3 segments lit)  Mid (2 seg- ments lit)  Lo (1 segment lit)  The level indicator (amber) light up during operation.
Page 580: Interior Lights List
6-2. Using the interior lights Interior lights list Vanity lights (if equipped) (P. 595) Interior light/front personal lights (if equipped) (P. 581, 581) Rear interior light (if equipped) (P. 581) Engine switch light (vehicles with a smart entry & start system) Grove box light (P.
Page 581: Interior Lights
6-2. Using the interior lights Interior lights (if equipped) Front ■ Turns the door position on/off Rear ■ Door position Personal lights (if equipped) Turns the lights on/off When the lights are on due to the door link switch, a light will not turn off even if its switch is pressed.
Page 582: Features
6-2. Using the interior lights ■ Illuminated entry system Vehicles without a smart entry & start system  When the interior light switch is in the door position, the interior lights auto- matically turn on/off according to the engine switch position, whether the doors are locked/unlocked and whether the doors are open/closed.
Page 583: List Of Storage Features
6-3. Using the storage features List of storage features Glove box (P. 584) Cup holders (P. 586) Bottle holders (P. 585) Console box (P. 584) WARNING ● Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: •...
Page 584: Glove Box
6-3. Using the storage features Glove box Press the button to open the glove box. The glove box light turns on when the tail lights are on. Console box Lift the lid while pulling up the knob. C-HR_OM_Europe_OM10528E...
Page 585: Bottle Holders
6-3. Using the storage features Bottle holders Front Rear   ● When storing a bottle, close the cap. ● The bottle may not be stored depending on its size or shape. WARNING Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 586: Cup Holders
6-3. Using the storage features Cup holders The depth of the rear side cup holder can be changed as shown in the illustration. WARNING Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking, causing injury.
Page 587: Luggage Compartment Features
6-3. Using the storage features Luggage compartment features Cargo hooks (if equipped) Cargo hooks are provided for securing loose items. WARNING To avoid injury, always return the cargo hooks to their positions when they are not in use. Grocery bag hooks NOTICE Do not hang any object heavier than 2 kg (4.4 lb.) on the grocery bag hook.
Page 588 6-3. Using the storage features Auxiliary boxes (if equipped) Remove the deck board. Type A Type B   Type C  C-HR_OM_Europe_OM10528E...
Page 589 6-3. Using the storage features Side auxiliary boxes Type A  Type B  Turn the knob and open the lid. C-HR_OM_Europe_OM10528E...
Page 590 6-3. Using the storage features First-aid kit storage space Type A Type B   Type C Type D   ■ Open and secure the deck board (type D only) The deck board can be secured while raised, as shown in the illustration. C-HR_OM_Europe_OM10528E...
Page 591 6-3. Using the storage features Luggage cover (if equipped) Type A  Unhook the cords and return the luggage cover to horizon- tal position. Pull it toward you and then lift the luggage cover to remove Installation position Confirm that the cover has been securely installed to the original position when install- ing.
Page 592 6-3. Using the storage features Type B  ■ Removing the luggage cover Unhook the cords. Unhook the hook to the hook brackets. Stowing the luggage cover ■ Hold the luggage cover with both hands. Point your thumbs in opposite direc- tions.
Page 593 6-3. Using the storage features Bend one side of the cover towards you. Twist the other side in the opposite direction, as shown in the illustration. Make a small circle, then fold it inward. Make sure the three circles are side by side. C-HR_OM_Europe_OM10528E...
Page 594 6-3. Using the storage features Make sure the luggage cover is properly folded. WARNING ● Do not place anything on the luggage cover. In the event of sudden brak- ing or turning, the item may go flying and strike an occupant. This could lead to an unexpected accident, resulting in death or serious injury.
Page 595: Other Interior Features
6-4. Using the other interior features Other interior features Sun visors To set the visor in the forward position, flip it down. To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. Vanity mirrors Slide the cover to open.
Page 596: Clock
6-4. Using the other interior features Clock The clock can be adjusted by pressing and holding the buttons. Adjusts the hours Adjusts the minutes ● Vehicles without a smart entry & start system: The clock is displayed when the engine switch is in the “ACC” or “ON” posi- tion.
Page 597: Power Outlet
6-4. Using the other interior features Power outlet Please use as a power supply for electronic goods that use less than 12 VDC/10 A (power consumption of 120 W). When using electronic goods, make sure that the power consumption of all the connected power outlet is less than 120 W. Lift the lid while pulling up the knob and open the console box.
Page 598: Assist Grips
6-4. Using the other interior features NOTICE ● To avoid damaging the power outlet, close the power outlet covers when the power outlet are not in use. Foreign objects or liquids that enter the power outlet may cause a short circuit.
Page 599 Maintenance and care 7-1. Maintenance and care Cleaning and protecting the vehicle exterior ..600 Cleaning and protecting the vehicle interior ...605 7-2. Maintenance Maintenance requirements....609 7-3. Do-it-yourself maintenance Do-it-yourself service precautions ......612 Hood ........615 Positioning a floor jack..617 Engine compartment..618 Tires........631 Tire inflation pressure ..644 Wheels.......646...
Page 600: The Vehicle Exterior
7-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 601 7-1. Maintenance and care ■ Automatic car washes ● Fold the mirrors before washing the vehicle. Start washing from the front of the vehicle. Make sure to extend the mirrors before driving. ● Brushes used in automatic car washes may scratch the vehicle surface and harm your vehicle’s paint.
Page 602 Precaution regarding the rear bumper with Blind Spot Monitor (if equipped) If the paint of the rear bumper is chipped or scratched, the system may mal- function. If this occurs, consult any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 603 7-1. Maintenance and care NOTICE ■ To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels, etc.) ● Wash the vehicle immediately in the following cases: • After driving near the sea coast • After driving on salted roads •...
Page 604 7-1. Maintenance and care NOTICE ■ When using a high pressure car wash ● Vehicles with back camera: When washing the vehicle, do not let water of the high pressure washer hit directly or the vicinity of the camera. Due to the shock from the high pressure water, it is possible the device may not operate as normal.
Page 605: Cleaning And Protecting The Vehicle Interior
7-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior ● Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water.
Page 606 7-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 607 7-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use the following types of detergent, as they may discolor the vehi- cle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach •...
Page 608 Water may also cause the body to rust. ■ When cleaning the inside of the windshield (vehicles with Toyota Safety Sense) Do not allow glass cleaner to contact the lens. Also, do not touch the lens.
Page 609: Maintenance Requirements
Scheduled maintenance Scheduled maintenance should be performed at specified intervals according to the maintenance schedule. For full details of your maintenance schedule, read the “Toyota Service Booklet” or “Toyota Warranty Booklet”. Do-it-yourself maintenance What about do-it-yourself maintenance? Many maintenance items are easy to do yourself if you have a little mechanical ability and a few basic automotive tools.
Page 610: Maintenance
■ Where to go for maintenance service? In order to maintain your vehicle in the best possible condition, Toyota recom- mends that maintenance service operations as well as other inspections and repairs be carried out by authorized Toyota retailers or repairers or other duly qualified and equipped professionals.
Page 611 ● Engine coolant temperature continually higher than normal If you notice any of these clues, take your vehicle to any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer, as soon as pos- sible. Your vehicle may need adjustment or repair.
Page 612: Do-It-Yourself Service Precautions
• Grease Battery condition (P. 626) • Conventional wrench (for terminal clamp bolts) • “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol-based non-silicate, non- amine, non-nitrite and non-borate coolant with long- Engine/inter- life hybrid organic acid technology...
Page 613 7-3. Do-it-yourself maintenance WARNING The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. ■ When working on the engine compartment ● Keep hands, clothing and tools away from the moving fan and engine drive belt.
Page 614 7-3. Do-it-yourself maintenance NOTICE ■ If you remove the air cleaner filter Driving with the air cleaner filter removed may cause excessive engine wear due to dirt in the air. ■ If the fluid level is low or high It is normal for the brake fluid level to go down slightly as the brake pads wear or when the fluid level in the accumulator is high.
Page 615: Hood
7-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release lever. The hood will pop up slightly. Pull up the auxiliary catch lever to side direction and lift the hood.
Page 616 7-3. Do-it-yourself maintenance WARNING ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ■...
Page 617: Positioning A Floor Jack
7-3. Do-it-yourself maintenance Positioning a floor jack When using a floor jack, follow the instructions in the manual provided with the jack and perform the operation safely. When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury.
Page 618: Engine Compartment
7-3. Do-it-yourself maintenance Engine compartment Washer fluid tank (P. 630) Engine oil level dipstick (P. 619) Engine coolant reservoir (P. 623) Intercooler coolant reservoir (P. 623) Fuse boxes (P. 656) Battery (P. 626) Intercooler Radiator (P. 625) Engine oil filler cap (P.
Page 619 7-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil ■ Park the vehicle on level ground. After warming up the engine and turning off the engine, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
Page 620 7-3. Do-it-yourself maintenance Adding engine oil ■ If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 621 7-3. Do-it-yourself maintenance ■ Engine oil consumption A certain amount of engine oil will be consumed while driving. In the following situations, oil consumption may increase, and engine oil may need to be refilled in between oil maintenance intervals. ● When the engine is new, for example directly after purchasing the vehicle or after replacing the engine ●...
Page 622 Call any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer, service station or auto parts store for information con- cerning recycling or disposal.
Page 623 7-3. Do-it-yourself maintenance Coolant The coolant level is satisfactory if it is between the “FULL” and “LOW” lines on the reservoir when the engine is cold. Engine coolant reservoir ■ Reservoir cap “FULL” line “LOW” line If the level is on or below the “LOW”...
Page 624 “Toyota Super Long Life Coolant” is a mixture of 50% coolant and 50% deion- ized water. (Minimum temperature: -35C [-31F]) For more details about engine coolant, contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 625 Check the radiator, condenser and clear away any foreign objects. If any of the above parts are extremely dirty or you are not sure of their condition, have your vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 626 7-3. Do-it-yourself maintenance Battery Check the battery as follows. Caution symbols ■ The meanings of each caution symbol on the top of the battery are as follows: No smoking, no naked Battery acid flames, no sparks Note operating Shield eyes instructions Keep away from children Explosive gas...
Page 627 Take extra care when connecting the bat- tery if the engine switch mode prior to discharge is unknown. If the system will not start even after multiple attempts at all methods above, contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 628 7-3. Do-it-yourself maintenance WARNING ■ Chemicals in the battery Batteries contain poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: ●...
Page 629 7-3. Do-it-yourself maintenance WARNING ■ Emergency measures regarding electrolyte ● If electrolyte gets in your eyes Flush your eyes with clean water for at least 15 minutes and get immedi- ate medical attention. If possible, continue to apply water with a sponge or cloth while traveling to the nearest medical facility.
Page 630 7-3. Do-it-yourself maintenance Washer fluid Add washer fluid in the following situations: ● A washer does not work. ● The warning message appears on the multi- information dis- play. (if equipped) WARNING ■ When adding washer fluid Do not add washer fluid when the engine is hot or running as washer fluid contains alcohol and may catch fire if spilled on the engine, etc.
Page 631: Tires
7-3. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with maintenance sched- ules and treadwear. Checking tires Check if the treadwear indicators are showing on the tires. Also check the tires for uneven wear, such as excessive wear on one side of the tread.
Page 632 Front Front 2WD models: To equalize tire wear and help extend tire life, Toyota recommends that tire rotation is carried out approximately every 10000 km (6000 miles). AWD models: To equalize tire wear and help extend tire life, Toyota recommends that tire rotation is carried out approximately every 5000 km (3000 miles).
Page 633 ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized. Have tire pressure warning valves and transmitter ID codes registered by any authorized Toyota retailer or Toyota autho- rized repairer, or any reliable repairer. (P. 635) ◆...
Page 634 7-3. Do-it-yourself maintenance How to initialize the tire pressure warning system ■ Park the vehicle in a safe place and turn the engine switch to the “LOCK” position (vehicles without a smart entry & start system) or off (vehicles with a smart entry & start system). Initialization cannot be performed while the vehicle is moving.
Page 635 The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code. Have the ID code registered by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 636 A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 637 ● In the following cases, the tire pressure warning system may not operate properly. • If non-genuine Toyota wheels are used. • A tire has been replaced with a tire that is not an OE (Original Equipment) tire. • A tire has been replaced with a tire that is not of the specified size.
Page 638 ID codes for the wheels of both normal tires and snow tires are registered beforehand. For information about changing ID codes, ask any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer as soon as possible. C-HR_OM_Europe_OM10528E...
Page 639 7-3. Do-it-yourself maintenance ■ Tire pressure warning system certification C-HR_OM_Europe_OM10528E...
Page 640 7-3. Do-it-yourself maintenance C-HR_OM_Europe_OM10528E...
Page 641 7-3. Do-it-yourself maintenance C-HR_OM_Europe_OM10528E...
Page 642 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
Page 643 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer or other qualified service shop as soon as possible. After use of liq- uid sealant, make sure to replace the tire pressure warning valve and trans- mitter when repairing or replacing the tire.
Page 644: Tire Inflation Pressure
● Reduced safety ● Damage to the drivetrain If a tire needs frequent inflating, have it checked by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●...
Page 645 7-3. Do-it-yourself maintenance WARNING ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. If the tires are not properly inflated, the following conditions may occur which could lead to an accident resulting in death or serious injury: ●...
Page 646: Wheels
● Used wheels ● Bent wheels that have been straightened Aluminum wheel precautions (if equipped) ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1600 km (1000 miles).
Page 647 7-3. Do-it-yourself maintenance ■ When replacing wheels The wheels of your vehicle are equipped with tire pressure warning valves and transmitters (except for compact spare tire) that allow the tire pressure warning system to provide advance warning in the event of a loss in tire infla- tion pressure.
Page 648 Because tire repair or replacement may affect the tire pressure warning valves and transmitters, make sure to have tires serviced by any autho- rized Toyota retailer or Toyota authorized repairer, or any reliable repairer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 649: Air Conditioning Filter
7-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method Turn the engine switch off. Open the glove box. Slide off the damper. Push in each side of the glove box to disconnect the claws, and then slowly and fully open the glove box while supporting...
Page 650 7-3. Do-it-yourself maintenance With the glove box fully open, slightly lift up the glove box and pull toward the seat to detach the bottom of the glove box. Do not use excessive force if the glove box does not detach when lightly pulled.
Page 651 Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, please refer to the “Toyota Service Booklet” or “Toyota Warranty Booklet”.) ■ If air flow from the vents decreases dramatically The filter may be clogged.
Page 652: Wireless Remote Control Electronic Key Battery
7-3. Do-it-yourself maintenance Wireless remote control/electronic key battery Replace the battery with a new one if it is depleted. You will need the following items: ● Flathead screwdriver ● Small flathead screwdriver ● Lithium battery CR1620 (vehicles without a smart entry & start sys- tem), or CR2032 (vehicles with a smart entry &...
Page 653 7-3. Do-it-yourself maintenance Remove the depleted battery. Insert a new battery with the “+” terminal facing up. When installing, reverse the steps listed. Vehicles with a smart entry & start system  Release the lock and take out the mechanical key. Remove the cover.
Page 654 Use a CR1620 (vehicles without a smart entry & start system) or CR2032 (vehicles with a smart entry & start system) lithium battery ● Batteries can be purchased at any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer, local electrical appliance shops or camera stores.
Page 655 7-3. Do-it-yourself maintenance WARNING ■ Removed battery and other parts These parts are small and if swallowed by a child, they can cause choking. Keep away from children. Failure to do so could result in death or serious injury. ■ Certification for the lithium battery CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLASED BY AN INCORRECT...
Page 656: Checking And Replacing Fuses
7-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec- essary. Turn the engine switch off. Open the fuse box cover. Engine compartment Type A fuse box (if equipped) ...
Page 657 7-3. Do-it-yourself maintenance Engine compartment Type C fuse box  While pushing the 2 claws, lift up the cover. When closing the cover, make sure to attach the 2 claws. Left side instrument panel (left-hand drive vehicles)  Remove the lid. Make sure to press the claw during removal or installation.
Page 658 7-3. Do-it-yourself maintenance Left side instrument panel (right-hand drive vehicles)  Push the tab in and remove the cover. Remove the lid. Make sure to press the claw during removal or installation. Remove the fuse with the pull- out tool. Only Type A fuses can be removed using the pullout tool.
Page 659 Replace the blown fuse with a new fuse of an appropriate amperage rat- ing. The amperage rating can be found on the fuse box lid. Type E: Contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. Type A Type B ...
Page 660 (P. 661) ● If the replaced fuse blows again, have the vehicle inspected by any autho- rized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ■ If there is an overload in a circuit The fuses are designed to blow, protecting the wiring harness from damage.
Page 661: Light Bulbs
As there is a danger that components may be damaged, we recommend that replacement is carried out by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. Preparing for light bulb replacement Check the wattage of the light bulb to be replaced.
Page 662 7-3. Do-it-yourself maintenance Rear ■ Rear turn signal lights (bulb type) Back-up lights (bulb type) License plate lights Rear fog light C-HR_OM_Europe_OM10528E...
Page 663 7-3. Do-it-yourself maintenance Replacing light bulbs Headlights (halogen bulb type) ■ Turn the bulb base counter- clockwise. Unplug the connector while pressing the lock release. Replace the light bulb, and install the bulb base. Align the 3 tabs on the light bulb with the mounting and insert.
Page 664 7-3. Do-it-yourself maintenance Front fog lights (if equipped on bulb type) ■ Remove the screw and clip, and partly remove the fender liner. Unplug the connector while pressing the lock release. Turn the bulb base counter- clockwise and remove it. C-HR_OM_Europe_OM10528E...
Page 665 7-3. Do-it-yourself maintenance Install a new light bulb. Align the 3 tabs on the light bulb with the mounting and insert. Turn clockwise and secure the bulb base. Install the connector. Shake the bulb base gently to check that it is not loose, turn the front fog light, on once and visually confirm that no light is leaking through the mounting.
Page 666 7-3. Do-it-yourself maintenance Front turn signal lights (bulb type) ■ Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed. C-HR_OM_Europe_OM10528E...
Page 667 7-3. Do-it-yourself maintenance Rear turn signal lights (bulb type) ■ Open the back door and remove the cover. To prevent damaging the vehi- cle, wrap the flathead screw- driver with a tape. Remove the 2 screws and pull the light unit toward the rear of the vehicle to remove Turn the bulb base counter- clockwise.
Page 668 7-3. Do-it-yourself maintenance Install the lamp assembly. Align the guides ( ) and pins ) on the lamp assembly with the mounting when installing it. Install the 2 screws. Install the cover. C-HR_OM_Europe_OM10528E...
Page 669 7-3. Do-it-yourself maintenance Back-up lights (bulb type) ■ Open the back door and remove the cover. To prevent damaging the vehi- cle, wrap the flathead screw- driver with a tape. Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed.
Page 670 7-3. Do-it-yourself maintenance License plate lights ■ Open the back door and remove the cover. To prevent damaging the vehi- cle, wrap the flathead screw- driver with a tape. Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed. C-HR_OM_Europe_OM10528E...
Page 671 7-3. Do-it-yourself maintenance Rear fog light ■ Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed. C-HR_OM_Europe_OM10528E...
Page 672 7-3. Do-it-yourself maintenance Side turn signal lights ■ Insert a flathead screwdriver and release the claw for the outside rear view mirror cover. To prevent damaging the vehi- cle, wrap the flathead screw- driver with a tape. Release the cover claws spanning over the entire perimeter.
Page 673 7-3. Do-it-yourself maintenance Insert a flathead screwdriver and remove the lens to the outside. Remove the socket from the side turn signal light housing. Remove the bulb. Replace the bulb and install the socket to the side turn signal light housing. Align the grooves of the socket to the side turn signal light hous- ing.
Page 674 7-3. Do-it-yourself maintenance Install the lens. Insert the claw of the lens. Attach the lens. Arrange the wire harness on the back side of the lens. Insert the claw of the cover. Attach the claw on the bot- tom part of the cover. C-HR_OM_Europe_OM10528E...
Page 675 Replacing the following bulbs ■ If any of the lights listed below has burnt out, have it replaced by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ● Headlights (vehicles with LED type) ● Front position lights/daytime running lights ●...
Page 676 ■ LED light bulbs The following lights consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ● Headlights (vehicles with LED type) ●...
Page 677 7-3. Do-it-yourself maintenance WARNING ■ Replacing light bulbs ● Turn off the lights. Do not attempt to replace the bulb immediately after turning off the lights. The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands. When it is unavoidable to hold the glass portion, use and hold with a clean dry cloth to avoid getting moisture and oils on the bulb.
Page 678 7-3. Do-it-yourself maintenance C-HR_OM_Europe_OM10528E...
Page 679: When Trouble Arises
When trouble arises 8-1. Essential information If you have a flat tire (vehicles with Emergency flashers...680 an emergency tire If your vehicle has puncture repair kit)...710 to be stopped If you have a flat tire in an emergency ....681 (vehicles with 8-2.
Page 680: Emergency Flashers
8-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
Page 681: To Be Stopped In An Emergency
8-1. Essential information If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the follow- ing procedure: Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.
Page 682 8-1. Essential information Vehicles without a smart entry & start system: Stop the engine by turning the engine switch to the “ACC” position. Vehicles with a smart entry & start system: To stop engine, press and hold the engine switch for 2 consecutive seconds or more, or press it briefly 3 times or more in suc- Press and hold for 2 seconds or...
Page 683: If Your Vehicle Needs To Be Towed
Situations when it is necessary to contact dealers before towing The following may indicate a problem with your transmission. Contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer or commercial towing service before towing. ● The engine is running but the vehicle does not move.
Page 684 8-2. Steps to take in an emergency Towing with a wheel-lift type truck From the front (2WD models) From the front (AWD models)   Release the parking brake. Use a towing dolly under the rear wheels. From the rear ...
Page 685 8-2. Steps to take in an emergency Using a flatbed truck If your vehicle is transported by a flatbed truck, it should be tied down at the locations shown in the illustration. If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°.
Page 686 : If the vehicle is not equipped with a wheel nut wrench, a wheel nut wrench can be purchased at any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 687 Wheel nut wrench Vehicles without a wheel nut wrench: Wheel nut wrench can be purchased at any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. Vehicles with a wheel nut wrench: Wheel nut wrench is installed in the lug- gage compartment.
Page 688 8-2. Steps to take in an emergency WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When towing the vehicle 2WD models  Be sure to transport the vehicle with the front wheels raised or with all four wheels raised off the ground.
Page 689 8-2. Steps to take in an emergency WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ While towing ● When towing using cables or chains, avoid sudden starts, etc., which place excessive stress on the towing eyelets, cables or chains. The towing eyelets, cables or chains may become damaged, broken debris may hit people, and cause serious damage.
Page 690 8-2. Steps to take in an emergency NOTICE ■ To prevent damage to the vehicle when towing using a wheel-lift type truck ● Vehicles without a smart entry & start system: Do not tow the vehicle from the rear when the engine switch is in the “LOCK” position or the key is removed.
Page 691: If You Think Something Is Wrong
If you think something is wrong If you notice any of the following symptoms, your vehicle proba- bly needs adjustment or repair. Contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer as soon as possible. Visible symptoms ●...
Page 692: Fuel Pump Shut Off System
8-2. Steps to take in an emergency Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 693: On Or A Warning Buzzer Sounds
If a light turns on or flashes, but then goes off, this does not necessarily indicate a malfunction in the system. However, if this continues to occur, have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. Warning light and warning buzzer list...
Page 694 • The electronic engine control system; • The electronic throttle control system; or • The electronic Multidrive system (if equipped).  Have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer immediately. SRS warning light Indicates a malfunction in: •...
Page 695 • The hill-start assist control system. The light will flash when the VSC or the TRC is operating. (P. 463)  Have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer immediately. Brake system warning light Indicates a malfunction in the electric parking brake ...
Page 696 PCS warning light (if equipped) When the warning light flashes (and a buzzer sounds): Indicates a malfunction in the PCS (Pre-Collision System)  Have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer immediately.
Page 697 Indicates a malfunction in the Stop & Start system (The Stop & Start cancel indicator will come on when the system is canceled: P. 375)  Have the vehicle inspected by any authorized Toyota (Flashes) retailer or Toyota authorized repairer, or any reliable repairer.
Page 698 When the light comes on after blinking for 1 minute: Malfunction in the tire pressure warning system (P. 701)  Have the system checked by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 699  Release the accelerator or brake pedal. Indicates a malfunction in the Brake Override System (with warning buzzer)  Have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable 1, 6 repairer immediately.
Page 700 The malfunction indicator lamp will go off after several trips. If the malfunction indicator lamp does not go off, contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. ■ Front passenger detection sensor, seat belt reminder and warning buzzer ●...
Page 701 1 minute when the engine switch is turned to the “ON” position (vehicles with- out smart entry & start system) or IGNITION ON mode (vehicles with smart entry & start system), have it checked by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 702 Check the tires. If a tire is flat, change it with the spare tire and have the flat tire repaired by the nearest authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 703 8-2. Steps to take in an emergency NOTICE ■ To ensure the tire pressure warning system operates properly Do not install tires with different specifications or makers, as the tire pres- sure warning system may not operate properly. C-HR_OM_Europe_OM10528E...
Page 704: If A Warning Message Is Displayed
Multi-information display If any of the warning messages are shown again after the following actions have been performed, contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. : The master warning light may not come on or flash when a warning mes- sage is displayed.
Page 705 The warning lights and warning buzzers operate as follows depending on the content of the message. If a message indicates the need for inspection by a dealer, have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer immediately. System...
Page 706: Vehicles With
■ If “Visit Your Dealer” is shown The system or part shown on the multi-information display is malfunctioning. Have the vehicle inspected by any authorized Toyota retailer or Toyota autho- rized repairer, or any reliable repairer. ■ If a message about an operation is shown ●...
Page 707 If “Charging System Malfunction” is shown Indicates a malfunction in the vehicle’s charging system. Immediately stop the vehicle in a safe place and contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. Continuing to drive the vehicle may be dangerous.
Page 708 Indicates that the engine oil should be changed. (After the engine oil is changed and the message has been reset.) Check and change the engine oil, and oil filter by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. After changing the engine oil, the message should be reset.
Page 709 8-2. Steps to take in an emergency ■ If “Front camera unavailable” or “Front camera vision blocked Clean and demist windshield” is displayed. The following systems may be suspended until the problem shown in the message is resolved. ● PCS (Pre-Collision System) ●...
Page 710: If You Have A Flat Tire
8-2. Steps to take in an emergency If you have a flat tire (vehicles with an emergency tire puncture repair kit) Vehicles equipped with an emergency tire puncture repair kit do not have a spare tire equipped. A puncture caused by a nail or screw passing through the tire tread can be repaired temporarily with the emergency tire punc- ture repair kit.
Page 711 8-2. Steps to take in an emergency Before repairing the tire ● Stop the vehicle in a safe place on a hard, flat surface. ● Set the parking brake. ● Shift the shift lever to P (Multidrive) or N (manual transmission). ●...
Page 712 A flat tire that cannot be repaired with the emergency tire puncture repair In the following cases, the tire cannot be repaired with the emergency tire puncture repair kit. Contact any authorized Toyota retailer or Toyota autho- rized repairer, or any reliable repairer.
Page 713 Wheel nut wrench (if equipped) Jack (if equipped) Emergency tire puncture repair kit : A jack, jack handle and wheel nut wrench can be purchased at any autho- rized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 714 Emergency tire puncture repair kit Wheel nut wrench (if equipped) Jack (if equipped) Jack handle (if equipped) : A jack, jack handle and wheel nut wrench can be purchased at any autho- rized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 715 8-2. Steps to take in an emergency Emergency tire puncture repair kit components Nozzle Pressure release button Hose Power plug Compressor switch Sticker Air pressure gauge C-HR_OM_Europe_OM10528E...
Page 716 8-2. Steps to take in an emergency Taking out the emergency tire puncture repair kit Remove the deck board. (P. 588) Take out the emergency tire puncture repair kit. (P. 713) Emergency repair method Take out the repair kit. When taking out the bottle from the original bag, do not tear or discard the bag.
Page 717 8-2. Steps to take in an emergency Connect the nozzle to the valve. Screw the end of the nozzle clock- wise as far as possible. The bottle should hang vertically without contacting the ground. If the bottle does not hang vertically, move the vehicle so that the tire valve is located properly.
Page 718 8-2. Steps to take in an emergency Make sure that the compressor switch is off. Remove the power plug from the compressor. Connect the power plug to the power outlet socket. (P. 597) C-HR_OM_Europe_OM10528E...
Page 719 8-2. Steps to take in an emergency Check the specified tire inflation pressure. Tire inflation pressure is specified on the label as shown. (P. 772) Left-hand drive vehicles Right-hand drive vehicles   Start the vehicle’s engine. To inject the sealant and inflate the tire, turn the compressor switch on.
Page 720 Turn the compres- sor switch off and contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. • If the tire inflation pressure exceeds the specified air pressure, let out some air to adjust the tire inflation pressure.
Page 721 8-2. Steps to take in an emergency Turn the compressor off. Disconnect the nozzle from the valve on the tire and then pull out the power plug from the power outlet socket. Some sealant may leak when the hose is removed. Press the button to release pressure from the bottle.
Page 722 8-2. Steps to take in an emergency Install the valve cap onto the valve of the repaired tire. Disconnect the hose from the bottle and attach the cap to the bottle. Place the bottle in the original bag and zip it. Temporarily store the bottle and compressor in the luggage com- partment.
Page 723 Store the compressor in the luggage compartment. Taking precautions to avoid sudden braking, sudden acceleration and sharp turns, drive carefully at under 80 km/h (50 mph) to the nearest authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer for tire repair or replacement. C-HR_OM_Europe_OM10528E...
Page 724 8-2. Steps to take in an emergency ■ If the tire is inflated to more than the specified air pressure Press the button to let some air out. Check that the air pressure indicator shows the specified air pressure. If the air pressure is under the designated pressure, turn the compressor switch on again and repeat the inflation procedure until the specified air pressure is reached.
Page 725 The sealant stored in the emergency tire puncture repair kit can be used only once to temporarily repair a single tire. If the sealant has been used and needs to be replaced, purchase a new bottle at any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. The compres- sor is reusable.
Page 726 8-2. Steps to take in an emergency WARNING ■ Do not drive the vehicle with a flat tire Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair.
Page 727 8-2. Steps to take in an emergency WARNING ■ When fixing the flat tire ● Stop your vehicle in a safe and flat area. ● Do not touch the wheels or the area around the brakes immediately after the vehicle has been driven. After the vehicle has been driven, the wheels and the area around the brakes may be extremely hot.
Page 728 8-2. Steps to take in an emergency WARNING ■ Driving to spread the liquid sealant evenly Observe the following precautions to reduce the risk of accidents. Failing to do so may result in a loss of vehicle control and cause death or serious injury.
Page 729 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer or other qualified service shop as soon as possible. After use of liq- uid sealant, make sure to replace the tire pressure warning valve and trans- mitter when repairing or replacing the tire.
Page 730 8-2. Steps to take in an emergency If you have a flat tire (vehicles with a spare tire) Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: P. 631 WARNING ■...
Page 731 8-2. Steps to take in an emergency Location of the spare tire, jack and tools Vehicles with a compact spare tire  Towing eyelet Jack handle Wheel nut wrench Spare tire Jack C-HR_OM_Europe_OM10528E...
Page 732 8-2. Steps to take in an emergency Vehicles with a full-size spare tire  Wheel nut wrench Spare tire Towing eyelet Jack handle Jack C-HR_OM_Europe_OM10528E...
Page 733 8-2. Steps to take in an emergency WARNING ■ Using the tire jack Observe the following precautions. Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. ● Do not use the tire jack for any purpose other than replacing tires or install- ing and removing tire chains.
Page 734 8-2. Steps to take in an emergency Taking out the jack Remove the deck board. (P. 588) Take out the jack. Taking out the spare tire Remove the deck board. (P. 588) Remove the cushion. Loosen the center fastener that secures the spare tire.
Page 735 8-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side In front of the front left-hand side tire...
Page 736 8-2. Steps to take in an emergency Slightly loosen the wheel nuts (one turn). Turn the tire jack portion hand until the center of the recessed portion of the jack is in contact with the center of the jack point. Assemble the jack handle and the wheel nut wrench as shown in the illustration.
Page 737 8-2. Steps to take in an emergency Raise the vehicle until the tire is slightly raised off the ground. Remove all the wheel nuts and the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface.
Page 738 • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. • When installing the wheel nuts, be sure to install them with the tapered ends facing inward.
Page 739 8-2. Steps to take in an emergency Installing the spare tire Remove any dirt or foreign mat- ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.
Page 740 8-2. Steps to take in an emergency Lower the vehicle. Firmly tighten each wheel nut two or three times in the order shown in the illustration. Tightening torque: 103 N·m (10.5 kgf·m, 76 ft·lbf) vehicles with steel wheels: When reinstalling an original wheel or installing a full- size spare tire, reinstall the wheel ornament.
Page 741 8-2. Steps to take in an emergency ■ The compact spare tire (if equipped) ● The compact spare tire is identified by the label “TEMPORARY USE ONLY” on the tire sidewall. Use the compact spare tire temporarily, and only in an emergency. ●...
Page 742 8-2. Steps to take in an emergency ■ Certification for the jack C-HR_OM_Europe_OM10528E...
Page 743 • Dynamic radar cruise control • VSC • Cruise control • TRC • BSM (Blind Spot Monitor) • EPS • Toyota parking assist-sensor • Automatic High Beam • S-IPA (Simple Intelligent Parking • PCS (Pre-Collision System) Assist System) • LDA (Lane Departure Alert with •...
Page 744 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 745: Start
8-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting proce- dures are being followed (P. 233, 236), consider each of the fol- lowing points: The engine will not start even though the starter motor operates normally.
Page 746 ● There may be a malfunction in the steering lock system. (vehicles with a smart entry & start system) Contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer if the problem cannot be repaired, or if repair procedures are unknown.
Page 747 Locks all the doors Closes the windows (turn and hold) Unlocks all the doors Opens the windows (turn and hold) : These settings must be custom- ized at any authorized Toyota retailer Toyota authorized repairer, or any reliable repairer. (P. 776) C-HR_OM_Europe_OM10528E...
Page 748 Press the engine switch. In the event that the engine still cannot be started, contact any autho- rized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 749 8-2. Steps to take in an emergency ■ Stopping the engine Set the parking brake, shift the shift lever to P (Multidrive) or N (manual trans- mission) and press the engine switch as you normally do when stopping the engine. ■...
Page 750: If The Vehicle Battery Is Discharged
The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can also call any authorized Toyota retailer or Toyota autho- rized repairer, or any reliable repairer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below.
Page 751 8-2. Steps to take in an emergency Connect the jumper cables according to the following procedure: Connect a positive jumper cable clamp to the positive (+) battery terminal on your vehicle. Connect the clamp on the other end of the positive cable to the positive (+) battery terminal on the second vehicle.
Page 752 Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order from which they were connected. Once the engine starts, have the vehicle inspected at any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer as soon as possible. ■...
Page 753 If an unsupported battery is used, Stop & Start system functions may be restricted to protect the battery. Also, battery performance may decrease and the engine may not be able to restart. Contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer for details. C-HR_OM_Europe_OM10528E...
Page 754 8-2. Steps to take in an emergency WARNING ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from the battery: ● Make sure each jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any other than the intended terminal.
Page 755 8-2. Steps to take in an emergency NOTICE ■ When handling jumper cables When connecting the jumper cables, ensure that they do not become entan- gled in the cooling fans or engine drive belt. C-HR_OM_Europe_OM10528E...
Page 756: Overheats
After the engine has cooled down sufficiently, inspect the hoses and radiator core (radia- tor) for any leaks. Radiator Cooling fans If a large amount of coolant leaks, immediately contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 757 Stop the engine immediately and contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. If the fans are operating: Have the vehicle inspected at the nearest authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. C-HR_OM_Europe_OM10528E...
Page 758 8-2. Steps to take in an emergency WARNING ■ When inspecting under the hood of your vehicle Observe the following precautions. Failure to do so may result in serious injury such as burns. ● If steam is seen coming from under the hood, do not open the hood until the steam has subsided.
Page 759: If The Vehicle Becomes Stuck
8-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: Stop the engine. Shift the shift lever to P (Multidrive) or N (manual transmission), and set the parking brake.
Page 760 8-2. Steps to take in an emergency WARNING ■ When attempting to free a stuck vehicle If you choose to push the vehicle back and forth to free it, make sure the surrounding area is clear to avoid striking other vehicles, objects or people. The vehicle may also lunge forward or lunge back suddenly as it becomes free.
Page 761 Vehicle specifications 9-1. Specifications Maintenance data (fuel, oil level, etc.)...762 Fuel information ....774 9-2. Customization Customizable features ..776 9-3. Initialization Items to initialize ....789 C-HR_OM_Europe_OM10528E...
Page 762 9-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights Overall length 4360 mm (171.7 in.) Overall width 1795 mm (70.7 in.) 1555 mm (61.2 in.) Overall height 1565 mm (61.6 in.) Wheelbase 2640 mm (103.9 in.) Front 1550 mm (61.0 in.) Tread Rear 1560 mm (61.4 in.)
Page 763 The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel.
Page 764 9-1. Specifications Engine number ■ The engine number is stamped on the engine block as shown. Engine Model 8NR-FTS 4-cylinder in line, 4-cycle, gasoline (with turbo- Type charger) 71.5  74.5 mm (2.82  2.93 in.) Bore and stroke Displacement 1197 cm (73.0 cu.in.) Valve clearance (engine...
Page 765 ■ “Toyota Genuine Motor Oil SAE 0W-20 for Downsized Turbo Gaso- line Engines” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil SAE 0W-20 for Downsized Turbo Gaso- line Engines” or equivalent to satisfy the following grade and vis- cosity.
Page 766 9-1. Specifications Recommended viscosity (SAE): “Toyota Genuine Motor Oil SAE 0W-20 for Downsized Turbo Gasoline Engines” is filled into Preferred your Toyota vehicle at manufac- turing, and SAE 0W-20 is the best choice for good fuel econ- omy and good starting in cold...
Page 767 9-1. Specifications How to read oil container labels: Either or both API registered marks are added to some oil contain- ers to help you select the oil you should use. API Service Symbol Top portion: “API SERVICE SN” means the oil quality designa- tion by American Petroleum Institute (API).
Page 768: Ignition System
6.4 L (6.8 qt., 5.6 Imp.qt.) 1.9 L (2.0 qt., 1.6 Imp.qt.) Intercooler Use either of the following: • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol- Coolant type based non-silicate, non-amine, non- nitrite, and non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
Page 769 Toyota authorized repairer, or any reliable repairer. NOTICE ■ Multidrive fluid type Using Multidrive fluid other than “Toyota Genuine CVT Fluid FE” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage to the transmission of your vehicle. C-HR_OM_Europe_OM10528E...
Page 770 Toyota Genuine Differential gear oil LT Oil type and viscosity 75W-85 GL-5 or equivalent Your Toyota vehicle is filled with “Toyota Genuine Differential Gear Oil” at the factory. Use Toyota approved “Toyota Genuine Differential Gear Oil” or an equivalent of matching quality to satisfy the above specification.
Page 771 Toyota Genuine Differential gear oil LT Oil type and viscosity 75W-85 GL-5 or equivalent Your Toyota vehicle is filled with “Toyota Genuine Differential Gear Oil” at the factory. Use Toyota approved “Toyota Genuine Differential Gear Oil” or an equivalent of matching quality to satisfy the above specification.
Page 772 9-1. Specifications Tires and wheels 16-inch tires  Tire size 215/65R16 98H Front Tire inflation pressure (Recommended cold tire 230 kPa (2.3 kgf/cm or bar, 33 psi) inflation pressure) Rear 16  6 1/2J Wheel size Wheel nut torque 103 N·m (10.5 kgf·m, 76 ft·lbf) 17-inch tires ...
Page 773 9-1. Specifications Compact spare tire (if equipped)  T145/90D16 106M, Tire size T145/70D18 107M Tire inflation pressure (Recommended cold tire 420 kPa (4.2 kgf/cm or bar, 60 psi) inflation pressure) 16  4T, 18  4T Wheel size Wheel nut torque 103 N·m (10.5 kgf·m, 76 ft·lbf) ■...
Page 774: Fuel Information
■ Use of ethanol blended gasoline in a gasoline engine Toyota allows the use of ethanol blended gasoline where the ethanol content is up to 10%. Make sure that the ethanol blended gasoline to be used has a Research Octane Number that follows the above.
Page 775 The use of these fuels will damage the vehicle’s fuel system. In case of any doubt, ask any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Page 776 Your vehicle includes a variety of electronic features that can be personalized to your preferences. The settings of these features can be changed using the multi-information display, on the navi- gation/multimedia system or at any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. Customizing vehicle features Changing using the multi-information display ■...
Page 777 9-2. Customization Vehicles with color display  Press “” or “” of the meter control switches, select Press “” or “” of the meter control switches, select “Meter Settings”, and then press Press “” or “” of the meter control switches, select the item, and then press Press “”...
Page 778 Some function settings are changed simultaneously with other func- tions when customized. Contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer for further details. Settings that can be changed using the multi-information display Settings that can be changed using the navigation or multimedia...
Page 779 9-2. Customization Gauges, meters and multi-information display (P. 124, 128) ■ Customized Function Default setting setting English Language km (km/L) Units km (L/100 km) miles (MPG) Driving Indicator – Light (Self-lighting) Current fuel consumption (gauge dis- play) Drive information 1 –...
Page 780 9-2. Customization : The default setting varies according to country. : Vehicles with monochrome display: French, German, Spanish, Italian, Portuguese, Russian, Turkish Vehicles with color display: German, French, Spanish, Italian, Portuguese, Dutch, Swedish, Norwe- gian, Danish, Russian, Finnish, Greek, Polish, Ukrainian, Turkish, Hungar- ian, Czech, Slovak, Romanian : Vehicles with color display only : 2 of the following items: current fuel consumption (gauge display), current...
Page 781 9-2. Customization Smart entry & start system and wireless remote control ■ (P. 155, 171) Customized Function Default setting setting Operation signal (emer- – gency flashers) Time elapsed before the 60 seconds automatic door lock func- tion is activated if a door is 30 seconds –...
Page 782 9-2. Customization Wireless remote control (P. 155) ■ Customized Function Default setting setting Wireless remote control – – Driver’s door unlocked in All doors one step, all Unlocking operation unlocked in – doors one step unlocked in two step Outside rear view mirrors (P. 198) ■...
Page 783 9-2. Customization Power windows (P. 201) ■ Customized Function Default setting setting mechanical linked operation – – (open) mechanical linked operation – – (close) Wireless remote control – – linked operation (open) Wireless remote control – – linked operation (close) mechanical wireless remote...
Page 784 60 seconds Time elapsed before headlights turn off (follow 30 seconds 90 seconds – – me home system) 120 seconds Toyota parking assist-sensor (P. 408) ■ Customized Function Default setting setting Detection distance of the Near – – side sensors...
Page 785 9-2. Customization PCS (Pre-Collision System) (P. 298) ■ Customized Function Default setting setting Pre-collision system – Warning timing Middle – Near : If equipped LDA (Lane Departure Alert with steering control) (P. 315) ■ Customized Function Default setting setting Steering assist –...
Page 786 9-2. Customization Stop & Start system (P. 374) ■ Customized Function Default setting setting Change the Stop & Start system duration when the Normal Long — — A/C is on : If equipped Automatic air conditioning system (P. 566) ■ Customized Function Default setting...
Page 787 9-2. Customization Illumination (P. 580) ■ Customized Function Default setting setting Time elapsed before the 15 seconds 7.5 seconds – interior lights turn off 30 seconds Operation after the engine – – switch is turned off Operation when the doors –...
Page 788 9-2. Customization ■ In the following situations, customize mode in which the settings can be changed through the multi-information display will automatically be turned off ● A warning message appears after the customize mode screen is displayed. ● The engine switch is turned off. ●...
Page 789 9-3. Initialization Items to initialize The following items must be initialized for normal system opera- tion after such cases as the battery being reconnected, or main- tenance being performed on the vehicle: Item When to initialize Reference Power window • When functioning abnormally P.
Page 790 9-3. Initialization C-HR_OM_Europe_OM10528E...
Page 791: Index
Index What to do if... (Troubleshooting) .....792 Alphabetical index ......797 For vehicles with navigation system or multimedia system, refer to “Navigation and multimedia system Owner’s manual” for information regarding the equipment listed below. • Navigation system • Hands-free system (for cellular phone) •...
Page 792 You lose your keys ● If you lose your keys or mechanical keys, new genuine keys or mechanical keys can be made by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer. (P. 147) ● If you lose your keys or electronic keys, the risk of vehicle theft increases significantly.
Page 793 What to do if... (Troubleshooting) If you think something is wrong The engine does not start (vehicles without a smart entry & start system) ● Vehicles with a manual transmission: Do you turn the key with the clutch pedal depressed firmly? (P. 233) ●...
Page 794 What to do if... (Troubleshooting) The shift lever cannot be shifted from P even if you depress the brake pedal (vehicles with a Multidrive) ● Vehicles without a smart entry & start system: Is the engine switch in the “ON” position? If you cannot release the shift lever by depressing the brake pedal with the engine switch in the “ON”...
Page 795 What to do if... (Troubleshooting) A warning buzzer sounds during driving ● The seat belt reminder light is flashing Are the driver and the front passenger wearing the seat belts? (P. 697) ● The brake system warning light (red indicator) is on Is the parking brake released? (P.
Page 796 What to do if... (Troubleshooting) A warning light turns on or a warning message is displayed ● When a warning light turns on or a warning message is displayed, refer to P. 693, 704. When a problem has occurred If you have a flat tire ●...
Page 797 Alphabetical index Alphabetical index Alarm .......... 97 Anchor brackets ......84 A/C........560, 566 Antennas (smart entry & Air conditioning filter....649 start system)......171 Anti-lock Brake (Anti-lock Brake System)..462 System (ABS) ......462 Warning light ......694 Warning light......694 Air conditioning filter ....
Page 798 Alphabetical index Back door ........ 165 Care........600, 605 Back-up lights Aluminum wheels....601 Replacing light bulb....669 Exterior ......... 600 Wattage......... 773 Interior........605 Battery ........626 Seat belts......606 Checking ....... 626 Cargo hooks......587 If the vehicle has discharged CD player........
Page 799 Alphabetical index Child-protectors....... 161 Door lock Cleaning......600, 605 Back door......165 Aluminum wheels....601 Side doors......155 Exterior........600 Smart entry & Interior........605 start system ....155, 165 Seat belts ......606 Wireless remote Clock ......... 596 control......156, 165 Condenser ........
Page 800 Alphabetical index Emergency flashers ....680 Emergency tire puncture Eco Driving Indicator..118, 134 repair kit ......... 710 Electric Power Steering Engine........764 (EPS)........463 ACCESSORY mode ..... 238 Warning light ......694 Compartment ......618 Electronic key ......144 Engine switch....
Page 801 Alphabetical index Front turn signal lights ... 255 Replacing light bulbs..... 666 Flat tire Turn signal lever ....255 Vehicles with a spare tire ..730 Wattage ........ 773 Vehicles without a spare Fuel ........... 285 tire........710 Capacity........ 764 Floor mats ........
Page 802 Alphabetical index Hill-start assist control.... 462 Hood.......... 615 Jack Open ........615 Positioning the jack....617 Hooks Vehicle-equipped Cargo hooks......587 jack ......713, 731 Grocery bag hooks....587 Jack handle ...... 713, 731 Retaining hooks (floor mat)..34 Jam protection function..202 Horn ..........
Page 803 Alphabetical index Lane Departure Alert (LDA) ..315 Maintenance Language (multi-information Do-it-yourself display)......126, 132 maintenance....... 612 LDA (Lane Departure Alert) ..315 Maintenance data ....762 Lever Maintenance Auxiliary catch lever ....615 requirements ...... 609 Hood lock release lever ..615 Malfunction indicator lamp..
Page 804 Parking assist sensors ... 408 Drive information... 125, 129 S-IPA (Simple Intelligent Language ...... 126, 132 Parking Assist System) ..420 LDA (Lane Departure Toyota parking Alert) ........315 assist-sensor ...... 408 Parking brake......256 (Pre-Collision System)..298 Parking brake engaged RSA (Road Sign Assist)..
Page 805 Alphabetical index Radiator ........625 S-IPA (Simple Intelligent Radio......... 485 Parking Assist System) ..420 Rear fog light Seat belt reminder light... 697 Replacing light bulb....671 Seat belts........38 Switch ........276 Adjusting the seat belt .... 39 Rear seat Child restraint system Folding down......
Page 806 Rain-sensing windshield Storage location....731 wipers ......... 281 Spark plug ........ 768 RSA (Road Sign Assist)..330 Specifications ......762 Toyota parking Speech command system assist-sensor ...... 408 Speed limiter ......387 Shift lever ......244, 250 Speedometer......119 If the shift lever cannot Sport mode.......
Page 807 Alphabetical index Stop & Start cancel switch..375 LDA (Lane Departure Stop & Start system....374 Alert) switch......320 Stop/tail lights ......675 Light switches ....... 265 Storage feature ......583 Meter control Stuck switches...... 122, 129 If the vehicle becomes Outside rear view mirror stuck ........
Page 808 Telephone switches ....530 Toyota parking Theft deterrent system assist-sensor ......408 Alarm........97 Toyota Safety Sense ....290 Double locking system .... 95 Automatic High Beam ... 271 Engine immobilizer system ..87 LDA (Lane Departure Tire inflation pressure ..... 644 Alert)........
Page 809 RSA (Road Sign Assist)..330 Parking brake......260 Seat belt reminder....697 Stop & Start system ....378 Toyota parking assist-sensor ...... 408 : For vehicles with navigation system or multimedia system, refer to “Navigation and multimedia system Owner’s manual”.
Page 810 Alphabetical index Warning messages ....704 Washer......278, 283 Checking ....... 630 Preparing and checking before winter....... 470 Switch ......278, 283 Washing and waxing ....600 Weight........762 What to do if... (Troubleshooting)....792 Wheels ........646 Replacing ......646 Size ........
Page 811 Alphabetical index C-HR_OM_Europe_OM10528E...
Page 812 GAS STATION INFORMATION Fuel filler Auxiliary catch lever Fuel filler door door opener P. 615 P. 287 P. 287 Hood lock release Tire inflation pressure lever P. 615 P. 772 Fuel tank capacity 50 L (13.2 gal., 11.0 Imp.gal.) (Reference) Fuel type P.

Toyota C-HR 2017 Owner's Manual

1 For Safety and Security

Theft Deterrent System Engine Immobilizer

1-1. for Safe Use

Child Safety

Instrument Cluster Warning Lights and

Operation of each Component

3-1. Key Information

3-3. Adjusting the Seats

4-1. before Driving

Refueling

4-5. Using the Driving Support Systems

Quick Links

Troubleshooting

Related Manuals for Toyota C-HR 2017

Summary of Contents for Toyota C-HR 2017

Table of Contents