Toyota C-HR Owner's Manual page 118

Hide thumbs Also See for C-HR:
Table of Contents

Advertisement

The meters and display illuminate when
The power switch is turned to ON mode.
Hybrid System Indicator
Charge area
Shows that energy is being recovered
via the regenerative brake.
Hybrid Eco area
Shows that gasoline engine power is
not being used very often.
The gasoline engine will automatically
stop and restart under various condi-
tions.
Eco area
Shows that the vehicle is being driven in an Eco-friendly manner.
Power area
Shows that an Eco-friendly driving range is being exceeded (during full
power driving, etc.)
In the following situation, the Hybrid System Indicator does not operate.
• "READY" indicator is not illuminated.
• The shift position is in a range P, R or N.
By keeping the indicator needle within Eco area, more Eco-friendly driving
can be achieved.
Charge area indicates regeneration
used to charge the hybrid battery (traction battery).
*
: When used in this manual, "regeneration" refers to the conversion of
energy created by the movement of the vehicle into electrical energy.
Engine speed
On hybrid vehicles, engine speed is precisely controlled in order to help
improve fuel efficiency and reduce exhaust emissions, etc.
There are times when the engine speed that is displayed may differ even
when vehicle operation and driving conditions are the same.
C-HR_HV_OM_General_OM10653E
2. Instrument cluster
*
status. Regenerated energy will be
117
2

Advertisement

Table of Contents
loading

Table of Contents