Top tether
anchorage
attachment
Child restraint system fixed with a seat belt
Installing child restraint system using a seat belt
■
Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.
If the child restraint system on hand is not within the "universal" cat-
egory (or the necessary information is not in the table), refer to the
"Vehicle List" provided by the child restraint system maker for vari-
ous possible installation positions, or check the compatibility after
asking the retailer of the child seat. (P. 65, 66)
If installing the child restraint system to the front passenger seat
1
is unavoidable, refer to P. 60 for front passenger seat adjustment.
If the head restraint interferes with the child restraint system
2
installation and the head restraint can be removed, remove the
head restraint. Otherwise, put the head restraint in the upper
most position. (P. 163)
Run the seat belt through the
3
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted. Securely
fix the seat belt to the child
restraint system in accor-
dance
enclosed
restraint system.
C-HR_HV_OM_General_OM10653E
Installation method
to
the
directions
with
the
child
1-2. Child safety
Page
P. 86
81
1