6
Press "" or "" of the meter
control
.
7
Press "" or "" of the meter control switch to select "SET" and
then press and hold
8
When initialization completes, a message is displayed on the
multi-information display and the tire pressure warning light will
blink 3 times.
◆
Registering ID codes
The tire pressure warning valve and transmitter is equipped with a
unique ID code. When replacing a tire pressure warning valve and
transmitter, it is necessary to register the ID code. Have the ID code
registered by your Toyota dealer.
■
When to replace your vehicle's tires
Tires should be replaced if:
●
The treadwear indicators are showing on a tire.
●
You have tire damage such as cuts, splits, cracks deep enough to expose
the fabric, and bulges indicating internal damage
●
A tire goes flat repeatedly or cannot be properly repaired due to the size or
location of a cut or other damage
If you are not sure, consult with your Toyota dealer.
■
Replacing tires and wheels
If the ID code of the tire pressure warning valve and transmitter is not regis-
tered, the tire pressure warning system will not work properly. After driving for
about 10 minutes, the tire pressure warning light blinks for 1 minute and stays
on to indicate a system malfunction.
C-HR_HV_OM_General_OM10653E
7-3. Do-it-yourself maintenance
switch
to
select
and then press
.
439
7