Toyota C-HR Owner's Manual page 345

344
5-7. "SETUP" menu
Changing the passkey
1
Select "Passkey" using the tune/select knob. (P. 339)
2 Select a 4 to 8-digit passkey using the knob.
Input the number 1 digit at a time.
3
When the entire number to be registered as a passkey has been
input, press
If the passkey to be registered has 8 digits, pressing
not necessary.
Setting automatic connection of the device on or off
If "BT Power" is set to on, the registered device will be connected
automatically when the power switch is turned to ACCESSORY
mode.
1
Select "BT Power" using the tune/select knob. (P. 339)
2
Select "ON" or "OFF" using the knob.
Displaying the device status
Select "Bluetooth
● Displaying the device name
Select "Device name" using the tune/select knob.
● Displaying the device address
Select "Device address" using the tune/select knob.
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
C-HR_HV_OM_General_OM10653E
("ENTER").
*
info" using the tune/select knob. (P. 339)
("ENTER") is