Table of Contents
Advertisement
516
8-2. Steps to take in an emergency
5
Connect the nozzle to the
valve.
Screw the end of the nozzle clock-
wise as far as possible.
The bottle should hang vertically
without contacting the ground. If
the bottle does not hang vertically,
move the vehicle so that the tire
valve is located properly.
6
Remove the cap from the bot-
tle.
7
Pull the hose out from the com-
pressor.
8
Connect the bottle to the com-
pressor.
Screw the end of the nozzle clock-
wise as far as possible.
C-HR_HV_OM_General_OM10653E
Advertisement
Table of Contents
