Table of Contents
Advertisement
492
8-2. Steps to take in an emergency
Emergency towing procedure
1
Take out the towing eyelet. (P. 513, 530)
2
Remove the eyelet cover using
a flathead screwdriver.
To protect the bodywork, place a
rag between the screwdriver and
the vehicle body as shown in the
illustration.
3
Insert the towing eyelet into the
hole and tighten partially by
hand.
4
Tighten down the towing eyelet
securely using a wheel nut
wrench
*
: If the vehicle is not equipped with a
wheel nut wrench, a wheel nut
wrench can be purchased at your
Toyota dealer.
5
Securely attach cables or chains to the towing eyelet.
Take care not to damage the vehicle body.
C-HR_HV_OM_General_OM10653E
*
or hard metal bar.
Advertisement
Table of Contents
