Toyota C-HR Owner's Manual page 218

Turning on the high beam headlights
With the headlights on, push
the lever away from you to turn
on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
Pull the lever toward you and
release it to flash the high
beams once.
You can flash the high beams with the headlights on or off.
Follow me home system (if equipped)
This system allows the headlights to be turned on for 30 seconds
when the power switch is turned off.
Pull the lever toward you and
release it with the light switch in
or
after turning the power switch off.
The lights are turned off in the fol-
lowing situations.
• The power switch is turned to
ON mode.
• The light switch is turned on.
• The light switch is pulled toward you and then released.
C-HR_HV_OM_General_OM10653E
4-3. Operating the lights and wipers
(if equipped)
217
4