Toyota C-HR Owner's Manual page 439

438
7-3. Do-it-yourself maintenance
◆
Installing tire pressure warning valves and transmitters
When replacing tires or wheels, tire pressure warning valves and
transmitters must also be installed.
When new tire pressure warning valves and transmitters are
installed, new ID codes must be registered in the tire pressure
warning computer and the tire pressure warning system must be
initialized. Have tire pressure warning valve and transmitter ID
codes registered by your Toyota dealer. (P. 439)
◆
Initializing the tire pressure warning system
When the tire size is changed, the tire pressure warning system
must be initialized.
When the tire pressure warning system is initialized, the current tire
inflation pressure is set as the benchmark pressure.
How to initialize the tire pressure warning system
■
1
Park the vehicle in a safe place and turn the power switch off.
Initialization cannot be performed while the vehicle is moving.
2
Adjust the tire inflation pressure to the specified cold tire inflation
pressure level. (P. 568)
Make sure to adjust the tire pressure to the specified cold tire inflation
pressure level. The tire pressure warning system will operate based on
this pressure level.
3
Turn the power switch to ON mode.
4
Press "" or "" of the meter control switch to select
(P. 120)
5
Press "" or "" of the meter control switch to select the "Vehicle
Settings" and then press
C-HR_HV_OM_General_OM10653E
to display the menu.
.