Page 1 Pictorial index Search by illustration For safety Make sure to read through them and security Instrument How to read the gauges and meters, the variety of cluster warning lights and indicators, etc. Operation of Opening and closing the doors and windows, each adjustment before driving, etc.
Page 2: Table Of Contents
TABLE OF CONTENTS For your information....... 6 Operation of each Reading this manual ....10 component How to search......11 Pictorial index ......12 3-1. Key information Keys........110 For safety and security 3-2. Opening, closing and locking the doors Side doors ......
Page 3 Opening the fuel tank cap........218 4-5. Using the driving 4-1. Before driving support systems Driving the vehicle..... 162 Toyota Safety Sense P..222 Cargo and luggage.... 172 PCS (Pre-Collision Vehicle load limits ..... 175 System) ......228 Trailer towing..... 176 LDA (Lane Departure Dinghy towing....
Page 4 TABLE OF CONTENTS Interior features Maintenance and care 5-1. Using the air conditioning 6-1. Maintenance and care system and defogger Cleaning and protecting Air conditioning system ..298 the vehicle exterior ..326 Heated steering wheel/ Cleaning and protecting seat heaters ....306 the vehicle interior ...
Page 5 If the vehicle becomes When trouble arises stuck ........460 Vehicle specifications 7-1. Essential information Emergency flashers ..408 If your vehicle has to be 8-1. Specifications stopped in Maintenance data an emergency ....409 (fuel, oil level, etc.) ..464 If the vehicle is trapped Fuel information....
Page 6: For Your Information
Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehi- cles are currently available in the market. You should know that Toyota does not warrant these products and is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
Page 7 Toyota, please visit www.toyota.com/privacyvts/. Usage of data collected through Safety Connect (U.S. mainland only) If your Toyota has Safety Connect and if you have subscribed to those ser- vices, please refer to the Safety Connect Telematics Subscription Service Agreement for information on data collected and its usage.
Page 8 EDR. ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehi- cle) is obtained •...
Page 9 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 10: Reading This Manual
Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. 1 2 3 Indicates operating or working procedures.
Page 11: How To Search
How to search Searching by name ■ • Alphabetical index ..P. 520 Searching installation ■ position • Pictorial index....P. 12 Searching by symptom or ■ sound • What to do if... (Troubleshooting) ..P. 516 Searching by title ■ • Table of contents .....P. 2 C-HR_OM_USA_OM10634U...
Page 12: Pictorial Index
Pictorial index Pictorial index ■ Exterior Doors ......... . . P. 118 Locking/unlocking .
Page 13 Pictorial index Windshield wipers ....... . . P. 213 Precautions for winter ....... P. 292 To prevent freezing (windshield wiper de-icer) .
Page 14 Pictorial index ■ Instrument panel Engine switch....... . . P. 178, 181 Starting the engine/changing the positions .
Page 15 Pictorial index Multi-information display ......P. 97 If a warning messages or indicator is displayed ... P. 431 Turn signal lever .
Page 16 Pictorial index ■ Switches Automatic High Beam switch ......P. 207 Fuel filler door opener ......P. 220 Heated steering wheel switch .
Page 17 Pictorial index Meter control switches ......P. 98 Vehicle-to-vehicle distance switch....P. 252 LDA (Lane Departure Alert with steering control) switch .
Page 18 Pictorial index ■ Interior SRS airbags ........P. 32 Floor mats .
Page 19 Pictorial index “SOS” button ........P. 74 Interior lights/personal lights .
Page 20 Pictorial index C-HR_OM_USA_OM10634U...
Page 21: For Safety And Security
For safety and security 1-1. For safe use Before driving...... 22 For safe driving ....24 Seat belts ......26 SRS airbags......32 Front passenger occupant classification system ..46 Exhaust gas precautions..53 1-2. Child safety Riding with children..... 54 Child restraint systems..
Page 22: For Safe Use
1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eyelets. Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.
Page 23 When installing the driver’s floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●...
Page 24: For Safe Driving
1-1. For safe use For safe driving For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture Adjust the angle of the seat- back so that you are sitting straight up and so that you do not have to lean forward to steer.
Page 25 1-1. For safe use Adjusting the mirrors Make sure that you can see the rear of the vehicle clearly by adjusting the inside and outside rear view mirrors properly. (P. 151, 152) WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ●...
Page 26: Seat Belts
1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder.
Page 27 1-1. For safe use Adjusting the seat belt shoulder anchor height (front seats) Push the seat belt shoulder anchor down while pressing the release button. Push the seat belt shoulder anchor up. Move the height adjuster up and down as needed until you hear a click.
Page 28 ■ Seat belt extender If your seat belts cannot be fastened securely because they are not long enough, personalized seat belt extender is available from your Toyota dealer free of charge. C-HR_OM_USA_OM10634U...
Page 29 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●...
Page 30 ● Ensure that the belt and plate are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.
Page 31 1-1. For safe use WARNING ■ Using a seat belt extender ● Do not wear the seat belt extender if you can fasten the seat belt without the extender. ● Do not use the seat belt extender when installing a child restraint system because the belt will not securely hold the child restraint system, increas- ing the risk of death or serious injury in the event of an accident.
Page 32: Srs Airbags
1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. C-HR_OM_USA_OM10634U...
Page 33 1-1. For safe use ◆ SRS front airbags SRS driver airbag/front passenger airbag Can help protect the head and chest of the driver and front passen- ger from impact with interior components SRS driver’s knee airbag Can help provide driver protection SRS front passenger’s seat cushion airbag Can help restrain the front passenger ◆...
Page 34 1-1. For safe use SRS airbag system components Front impact sensors Driver’s seat position sensor Front passenger airbag Driver airbag “AIR BAG ON” and “AIR BAG Driver’s knee airbag OFF” indicator lights SRS warning light Side impact sensors (front) Airbag sensor assembly Side impact sensors (front Seat belt pretensioners and doors)
Page 35 1-1. For safe use Your vehicle is equipped with ADVANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU) controls airbag deployment based on infor- mation obtained from the sensors etc. shown in the system compo- nents diagram above.
Page 36 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are safer for infants and children than the front passenger seat.
Page 37 1-1. For safe use WARNING ■ SRS airbag precautions ● Do not sit on the edge of the seat or lean against the dashboard. ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger.
Page 38 1-1. For safe use WARNING ■ SRS airbag precautions ● Do not attach anything to or lean any- thing against areas such as the dash- board, steering wheel pad and lower portion of the instrument panel. These items can become projectiles when the SRS driver, front passenger and driver’s knee airbag deploy.
Page 39 If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillars garnishes, are damaged or cracked, have them replaced by your Toyota dealer. ● Do not place anything, such as a cushion, on the front passenger’s seat.
Page 40 Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
Page 41 1-1. For safe use ■ If the SRS airbags deploy (inflate) ● Slight abrasions, burns, bruising, etc., may be sustained from SRS airbags, due to the extremely high speed deployment (inflation) by hot gases. ● A loud noise and white powder will be emitted. ●...
Page 42 1-1. For safe use ■ SRS airbag deployment conditions (SRS side and curtain shield airbags) ● The SRS side and curtain shield airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to the impact force produced by an approximately 3300 lb.
Page 43 1-1. For safe use ■ Types of collisions that may not deploy the SRS airbags (SRS front air- bags) The SRS front airbags do not generally inflate if the vehicle is involved in a side or rear collision, if it rolls over, or if it is involved in a low-speed frontal collision.
Page 44 Pitching end over end ■ When to contact your Toyota dealer In the following cases, the vehicle will require inspection and/or repair. Con- tact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ●...
Page 45 1-1. For safe use ● The front passenger’s seat cushion sur- face is scratched, cracked, or otherwise damaged. ● The surface of the seats with the SRS side airbag is scratched, cracked, or oth- erwise damaged. ● The portion of the front pillars, rear pil- lars or roof side rail garnishes (padding) containing the SRS curtain shield air- bags inside is scratched, cracked, or...
Page 46: Front Passenger Occupant Classification System
1-1. For safe use Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classi- fication system. This system detects the conditions of the front passenger seat and activates or deactivates the front passenger airbag and seat cushion airbag in the front passenger side. U.S.A.
Page 47 1-1. For safe use Condition and operation in the front passenger occupant classi- fication system Adult ■ “AIR BAG ON” and “AIR BAG OFF” “AIR BAG ON” indicator lights Indicator/ SRS warning light warning light Seat belt reminder light flashing Front passenger airbag Side airbag Activated...
Page 48 1-1. For safe use Child ■ “AIR BAG OFF” “AIR BAG ON” and “AIR BAG OFF” or “AIR BAG indicator lights ON” Indicator/ SRS warning light warning light Seat belt reminder light flashing Deactivated or Front passenger airbag activated Side airbag on the front passenger seat Activated Curtain shield airbag...
Page 49 1-1. For safe use Child restraint system with infant ■ “AIR BAG “AIR BAG ON” and “AIR BAG OFF” indicator lights OFF” Indicator/ SRS warning light warning light Seat belt reminder light flashing Front passenger airbag Deactivated Side airbag on the front passenger seat Activated Curtain shield airbag Devices...
Page 50 1-1. For safe use There is a malfunction in the system ■ “AIR BAG ON” and “AIR BAG OFF” “AIR BAG OFF” indicator lights Indicator/ SRS warning light warning light Seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seat Activated Curtain shield airbag...
Page 51 1-1. For safe use WARNING ■ Front passenger occupant classification system precautions Observe the following precautions regarding the front passenger occupant classification system. Failure to do so may cause death or serious injury. ● Wear the seat belt properly. ● Make sure the front passenger’s seat belt plate has not been left inserted into the buckle before someone sits in the front passenger seat.
Page 52 SRS warning light may come on to indicate a malfunction of the front passenger occupant classification system. In this case, contact your Toyota dealer immediately. ● Child restraint systems installed on the rear seat should not contact the front seatbacks.
Page 53: Exhaust Gas Precautions
Keep the back door closed. ● If you smell exhaust gases in the vehicle even when the back door is closed, open the windows and have the vehicle inspected at your Toyota dealer as soon as possible. ■ When parking ●...
Page 54: Child Safety
1-2. Child safety Riding with children Observe the following precautions when children are in the vehi- cle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt. ● It is recommended that children sit in the rear seats to avoid acci- dental contact with the shift lever, wiper switch, etc.
Page 55: Child Restraint Systems
1-2. Child safety Child restraint systems Before installing a child restraint system in the vehicle, there are precautions that need to be observed, different types of child restraint systems, as well as installation methods, etc., written in this manual. ● Use a child restraint system when riding with a small child that cannot properly use a seat belt.
Page 56 ● Toyota strongly urges the use of a proper child restraint system that con- forms to the weight and size of the child, installed on the rear seat. Accord- ing to accident statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 57 1-2. Child safety Child restraint system Types of child restraint system installation methods ■ Confirm with the operation manual enclosed with the child restraint system about the installation of the child restraint system. Installation method Page Seat belt P. 61 attachment Child restraint...
Page 58 1-2. Child safety When using a child restraint system When installing a child restraint system to a front passenger ■ seat For the safety of a child, install a child restraint system to a rear seat. When installing child restraint system to a front passenger seat is unavoidable, adjust the seat as follows and install the child restraint system.
Page 59 1-2. Child safety WARNING ■ When using a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● Never install a rear-facing child restraint system on the front passenger seat even if the “AIR BAG OFF” indicator light is illuminated. In the event of an accident, the force of the rapid inflation of the front passenger airbag can cause death or serious injury to the child if the rear-facing child restraint system is installed on the front passenger seat.
Page 60 1-2. Child safety WARNING ■ When using a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● When a booster seat is installed, always ensure that the shoulder belt is positioned across the center of the child’s shoulder.
Page 61 1-2. Child safety Child restraint system fixed with a seat belt A child restraint system for a small child or baby must itself be prop- erly restrained on the seat with the lap portion of the lap/shoulder belt. ◆ Installing child restraint system using a seat belt (child restraint lock function belt) Install the child restraint system in accordance to the operation manual enclosed with the child restraint system.
Page 62 1-2. Child safety While pushing child restraint system down into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 63 1-2. Child safety Run the seat belt through the child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted. Fully extend the shoulder belt and allow it to retract to put it in lock mode.
Page 64 1-2. Child safety Booster seat ■ If installing the child restraint system to the front passenger seat is unavoidable, refer to P. 58 for front passenger seat adjustment. High back type: If the head restraint interferes with your child restraint system, and the head restraint can be removed, remove the head restraint.
Page 65 1-2. Child safety ◆ Removing a child restraint system installed with a seat belt Press the buckle release button and fully retract the seat belt. When releasing the buckle, the child restraint system spring up due to the rebound of the seat cushion.
Page 66 1-2. Child safety WARNING ■ When installing a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious inju- ries that could result in death.
Page 67 1-2. Child safety Child restraint system fixed with a child restraint LATCH anchor Child restraint LATCH anchors ■ LATCH anchors are provided for the rear outboard seats. (Buttons displaying the location of the anchors are attached to the seats.) When installing in the rear outboard seats ■...
Page 68 1-2. Child safety With flexible lower attachments  Latch the hooks of the lower attachments onto the LATCH anchors. For owners in Canada: symbol child restraint system indicates the presence of a lower connec- tor system. Canada only With rigid lower attachments ...
Page 69 1-2. Child safety If the child restraint has a top tether strap, follow the child restraint manufacturer’s operation manual regarding the installa- tion, using the top tether strap to latch onto the top tether strap anchor. (P. 70) After installing the child restraint system, rock it back and forth to ensure that it is installed securely.
Page 70 1-2. Child safety WARNING ■ When installing a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● When using the LATCH anchors, be sure that there are no foreign objects around the anchors and that the seat belt is not caught behind the child restraint system.
Page 71 1-2. Child safety Fixing the top tether strap to the anchor bracket ■ Install the child restraint system in accordance to the operation manual enclosed with the child restraint system. Rear outboard seats  Remove the head restraint. (P. 145) Latch the hook onto the Top tether strap anchor bracket and tighten...
Page 72 1-2. Child safety Rear center seat  Adjust the head restraint to the upmost position. If the head restraint interferes with your child restraint system, and the head restraint can be removed, remove head restraint. (P. 145) Latch the hook onto the Top tether strap anchor bracket and tighten the top tether strap.
Page 73 1-2. Child safety ■ Laws and regulations pertaining to anchors The LATCH system conforms to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 specifica- tions can be used. This vehicle is designed to conform to SAE J1819. WARNING ■...
Page 74: Emergency Assistance
Telematics Subscription Service Agreement and its Terms and Conditions, as in effect and amended from time to time, a current copy of which is available at Toyota.com in the United States, Toyotapr.com in Puerto Rico and Toyota.ca in Canada.
Page 75 A variety of subscription terms are available for purchase. Contact your Toyota dealer, call the following appropriate Safety Connect response center or push the “SOS” button in your vehicle for further subscription details.
Page 76 Safety Connect system is active and in use. ● Safety Connect is available beginning Fall 2009 on select Toyota models (in the contiguous United States only). Contact with the Safety Connect response center is dependent upon the telematics device being in operative...
Page 77 ● Green indicator light flashing = Safety Connect call in process ● Red indicator light (except at vehicle start-up) = System malfunction (contact your Toyota dealer) ● No indicator light (off) = Safety Connect service not active Safety Connect services Automatic Collision Notification ■...
Page 78 Safety-Connect-equipped vehicle location data may, under certain circumstances, be shared with third parties to locate your vehicle. Further information is available at Toyota.com in the United States, Toyotapr.com in Puerto Rico and Toyota.ca in Canada. Emergency Assistance Button (“SOS”) ■...
Page 79 1-3. Emergency assistance Safety information for Safety Connect Important! Read this information before using Safety Connect. Exposure to radio frequency signals ■ The Safety Connect system installed in your vehicle is a low-power radio transmitter and receiver. It receives and also sends out radio frequency (RF) signals.
Page 80 1-3. Emergency assistance ■ Certification for Safety Connect C-HR_OM_USA_OM10634U...
Page 81: Theft Deterrent System
1-4. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously regis- tered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehi- cle.
Page 82 1-4. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the grip portion of the key is in contact with a metallic object ●...
Page 83 1-4. Theft deterrent system For vehicles sold in the U.S.A.  For vehicles sold in Canada  NOTICE ■ To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed. C-HR_OM_USA_OM10634U...
Page 84 1-4. Theft deterrent system C-HR_OM_USA_OM10634U...
Page 85: Instrument Cluster
Instrument cluster Instrument cluster Warning lights and indicators ......86 Gauges and meters .... 94 Multi-information display ..97 Fuel consumption information ...... 105 C-HR_OM_USA_OM10634U...
Page 86: Warning Lights And Indicators
2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s vari- ous systems. For the purpose of explanation, the following illustration dis- plays all warning lights and indicators illuminated.
Page 87 2. Instrument cluster Warning lights Warning lights inform the driver of malfunctions in the indicated vehi- cle’s systems. Warning lights Pages Brake system warning light (red) (U.S.A.) P. 421 Brake system warning light (red) (Canada) P. 421 Malfunction indicator lamp (U.S.A.) P.
Page 88 They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. : The light flashes to indicate a malfunction.
Page 89 2. Instrument cluster Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Indicators Pages Turn signal indicator P. 193 Headlight indicator (U.S.A.) P. 202 Tail light indicator (Canada) P. 202 Front fog light indicator (if equipped) P.
Page 90 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. : The light turns on when the system is off.
Page 91 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. : The light turns on when the system is operating.
Page 92 2. Instrument cluster Symbols on multi-information display Pages Charging system warning light P. 421 Low engine oil pressure warning light P. 421 High engine coolant temperature warning light P. 424 Smart key system (if equipped) P. 181 Brake Override System/Drive-Start Control P.
Page 93 Have the vehicle inspected by your Toyota dealer. C-HR_OM_USA_OM10634U...
Page 94: Gauges And Meters
2. Instrument cluster Gauges and meters The units used on the speedometer may differ depending on the tar- get region. Tachometer Displays the engine speed in revolutions per minute. Multi-information display Presents the driver with a variety of driving-related data. (P. 97) Displays warning messages in case of a malfunction.
Page 95 Displays the remaining distance until the engine oil should be changed. If “-” is displayed before distance, it means oil maintenance is overdue. Have the engine oil changed by your Toyota dealer. • Displays the maintenance required information when the engine switch is turned to the “ON”...
Page 96 • When the outside temperature has changed suddenly (at the entrance/ exit of a garage, tunnel, etc.) ● If “” is displayed continuously, the system may be malfunctioning. Take your vehicle to your Toyota dealer. ■ Adjusting the clock The clocks can be adjusted on the audio system screen.
Page 97: Multi-Information Display
2. Instrument cluster Multi-information display Display contents The multi-information display presents the driver with a variety of vehi- cle data. ● Menu icons Displays the following informa- tion when an icon is selected. (P. 98) Some of the information may be displayed automatically depending on the situation.
Page 98 2. Instrument cluster Operating the meter control switches The multi-information display is operated using the meter control switches. Return to the previous screen Enter/set Select an item/change pages Drive information ● Current fuel consumption (bar type/numerical value) Displays the current rate of fuel consumption. ●...
Page 99 2. Instrument cluster ● Eco Driving Indicator Zone Display P. 102 ● Speedometer Displays the vehicle speed. ● G Monitor P. 103 ● Display off A blank screen is displayed. : Can be registered to Drive information 1 and 2. (P. 100) : Resetting procedures: •...
Page 100 2. Instrument cluster Settings display The settings of the following items can be changed, refer to P. 488. For functions that can be enabled or disabled, the function switches between on and off each time is pressed. ● LDA (Lane Departure Alert with steering control) (P. 242) Select to set up the following items.
Page 101 2. Instrument cluster ● Vehicle Settings • RCTA setup (P. 282) Select to change the RCTA buzzer volume. • (Tire pressure warning system) setup (P. 364) Select to initialize the tire pressure warning system. ● Meter settings Select the menu to set up the following items. •...
Page 102 2. Instrument cluster ■ Setting items ● “Meter Settings” and “Vehicle Settings” setting items are not selectable during driving and cannot be operated. Also, the settings screen is temporarily canceled in the following situations. • A warning message is displayed. •...
Page 103 2. Instrument cluster ■ G Monitor The following item is displayed. G-force display Displays the current G-force state. ■ Ending display When the engine switch is turned off, each of the following will be displayed on the multi-information display, and will extinguish after approximately 30 seconds.
Page 104 2. Instrument cluster WARNING ■ Caution for use while driving ● When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle. ● Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc.
Page 105: Fuel Consumption Information
2. Instrument cluster Fuel consumption information Fuel consumption information can be displayed on the audio system screen. C-HR_OM_USA_OM10634U...
Page 106 2. Instrument cluster Trip information Press the “MENU” button. Select “Info” on the “Menu” screen. If the “History” screen is displayed, select “Trip Information”. Resetting the consumption data Average vehicle speed since the engine was started Elapsed time since the engine was started Fuel consumption in the past 15 minutes...
Page 107 2. Instrument cluster History Press the “MENU” button. Select “Info” on the “Menu” screen. If the “Trip Information” screen is displayed, select “History”. Resetting the history data Best recorded fuel consumption Latest fuel consumption Previous fuel consumption record Displays the daily average fuel consumption.
Page 108 2. Instrument cluster C-HR_OM_USA_OM10634U...
Page 109: Operation Of Each Component
Operation of each component 3-1. Key information Keys ........110 3-2. Opening, closing and locking the doors Side doors......118 Back door......125 Smart key system ..... 131 3-3. Adjusting the seats Front seats ......141 Rear seats......143 Head restraints....145 3-4.
Page 110: Key Information
3-1. Key information Keys The keys The following keys are provided with the vehicle. Vehicles without a smart key system  Key (with a wireless remote control function) Operating the wireless remote con- trol function Key number plate Vehicles with a smart key system ...
Page 111 Pressing the button again within 3 seconds unlocks the other doors. Opens the windows P. 118 ( : These settings must be customized at your Toyota dealer. Vehicles with a smart key system  Locks all the doors P. 118 (...
Page 112 ■ If you lose your keys New genuine keys can be made by your Toyota dealer using the other key (vehicles without a smart key system) or mechanical key (vehicles with a smart key system) and the key number stamped on your key number plate.
Page 113 3-1. Key information ■ When riding in an aircraft When bringing a key with wireless remote control function onto an aircraft, make sure you do not press any buttons on the key while inside the aircraft cabin. If you are carrying the key in your bag, etc., ensure that the buttons are not likely to be pressed accidentally.
Page 114 The battery can be exchanged by the users. (P. 383) However, as there may be damage to the key when exchanging, it is recommended to have the battery exchanged at your Toyota Dealer. ● To avoid serious deterioration, do not leave the electronic key within 3 ft.
Page 115 3-1. Key information ■ Certification for the wireless remote control For vehicles sold in the U.S.A.  C-HR_OM_USA_OM10634U...
Page 116 3-1. Key information For vehicles sold in the U.S.A.  For vehicles sold in Canada  C-HR_OM_USA_OM10634U...
Page 117 When an electronic key is lost (vehicles with a smart key system) If the electronic key remains lost, the risk of vehicle theft increases signifi- cantly. Visit your Toyota dealer immediately with all remaining electronic keys that were provided with your vehicle.
Page 118: Side Doors
Unlocks the door Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors. Press and hold to open the windows : These settings must be customized at your Toyota dealer. C-HR_OM_USA_OM10634U...
Page 119 Pressing the button again within 3 seconds unlocks the other doors. Press and hold to open the windows : These settings must be customized at your Toyota dealer. ◆ Turning the key operates the doors as follows: Vehicles without a smart key system ...
Page 120 3-2. Opening, closing and locking the doors ■ Operation signals Doors: A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked using the wireless remote control. (Locked: once; Unlocked: twice) Windows: A buzzer sounds to indicate that the windows are operating. ■...
Page 121 3-2. Opening, closing and locking the doors Unlocking and locking the doors from the inside ◆ Door lock switches Locks all the doors Unlocks all the doors ◆ Inside lock buttons Locks the door Unlocks the door The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position.
Page 122 3-2. Opening, closing and locking the doors Locking the doors from the outside without a key Move the inside lock button to the lock position. Close the door. Vehicles without a smart key system  The door cannot be locked if the key is in the engine switch. Vehicles with a smart key system ...
Page 123 3-2. Opening, closing and locking the doors ■ Switching the door unlock function (vehicles with a smart key system) It is possible to set which doors the entry function unlocks using the wireless remote control. Turn the engine switch off. When the indicator light on the key surface is not on, press and hold approximately 5 seconds while pressing and holding The setting changes each time an operation is performed, as shown below.
Page 124 3-2. Opening, closing and locking the doors WARNING ■ To prevent an accident Observe the following precautions while driving the vehicle. Failure to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. ●...
Page 125: Back Door
3-2. Opening, closing and locking the doors Back door The back door can be locked/unlocked and opened by the fol- lowing procedures. Unlocking and locking the back door ◆ Entry function (vehicles with a smart key system) Carry the electronic key to enable this function. Press the button to unlock the back door.
Page 126 3-2. Opening, closing and locking the doors Opening the back door Raise the back door while pushing up the back door opener switch. The back door cannot be closed immediately after the back door opener switch is pushed. When closing the back door Lower the back door using the back door handle, and make sure to push the back door down from...
Page 127 3-2. Opening, closing and locking the doors ■ If the back door opener is inoperative The back door can be operated from the inside. Using a screwdriver, remove the cover. To protect the cover, place a rag between the flathead screwdriver and the cover as shown in the illustration.
Page 128 3-2. Opening, closing and locking the doors WARNING ■ Caution while driving ● Keep the back door closed while driving. If the back door is left open, it may hit near-by objects while driving or lug- gage may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard.
Page 129 3-2. Opening, closing and locking the doors WARNING ■ Operating the back door Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in death or serious injury. ● Remove any heavy loads, such as snow and ice, from the back door before opening it.
Page 130 If a bicycle carrier or similar heavy object is attached to the back door, it may suddenly shut again after being opened, causing someone’s hands, head or neck to be caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recommended. NOTICE ■...
Page 131: Smart Key System
3-2. Opening, closing and locking the doors Smart key system  The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key. ● Unlocks and locks the doors (P. 118) ●...
Page 132 3-2. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of an outside front door handle and the back door.
Page 133 When “Smart Key System Malfunction. See Owner’s Manual.” is dis- played on the multi-information display The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ■ Battery-saving function The battery-saving function will be activated in order to prevent the electronic key battery and the vehicle battery from being discharged while the vehicle is not in operation for a long time.
Page 134 3-2. Opening, closing and locking the doors ■ Conditions affecting operation The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system, wireless remote control and engine immobi- lizer system from operating properly.
Page 135 3-2. Opening, closing and locking the doors ■ Note for the entry function ● Even when the electronic key is within the effective range (detection areas), the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.
Page 136 3-2. Opening, closing and locking the doors ● Touching the door lock sensor while wearing gloves may delay or prevent lock operation. Remove the gloves and touch the lock sensor again. ● If the door handle becomes wet while the electronic key is within the effec- tive range, the door may lock and unlock repeatedly.
Page 137 3-2. Opening, closing and locking the doors ■ When the vehicle is not driven for extended periods ● To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2 m) of the vehicle. ● The smart key system can be deactivated in advance. (P. 488) ■...
Page 138 3-2. Opening, closing and locking the doors ■ Certification for the smart key system For vehicles sold in the U.S.A.  For vehicles sold in the U.S.A.  For vehicles sold in Canada  C-HR_OM_USA_OM10634U...
Page 139 3-2. Opening, closing and locking the doors For vehicles sold in the U.S.A.  For vehicles sold in Canada  C-HR_OM_USA_OM10634U...
Page 140 (P. 131) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of the emitted radio waves.
Page 141: Adjusting The Seats
3-3. Adjusting the seats Front seats Adjustment procedure Manual seat  Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever Lumbar support adjustment switch (if equipped) Power seat (driver’s side only)  Seat position adjustment switch Seatback angle adjustment switch...
Page 142 3-3. Adjusting the seats WARNING ■ When adjusting the seat position ● Take care when adjusting the seat position to ensure that other passen- gers are not injured by the moving seat. ● Do not put your hands under the seat or near the moving parts to avoid injury.
Page 143: Rear Seats
3-3. Adjusting the seats Rear seats The seatbacks of the rear seats can be folded down. Before folding down the seatbacks Park the vehicle in a safe place. Apply the parking brake firmly and shift the shift lever to P. (P. 188) Adjust the position of the front seat and the angle of the seatback.
Page 144 3-3. Adjusting the seats WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When folding the rear seatbacks down ● Do not fold the seatbacks down while driving. ● Stop the vehicle on level ground, set the parking brake and shift the shift lever to P.
Page 145: Head Restraints
3-3. Adjusting the seats Head restraints Head restraints are provided for all seats. Front seats Pull the head restraints up. Down Push the head restraint down while pressing the lock release button. Lock release button Rear seats Rear outboard seats ■...
Page 146 3-3. Adjusting the seats ■ Removing the head restraints Front seats  Pull the head restraint up while pressing the lock release button. Lock release button Rear outside seats  Pull the head restraint up while pressing the both lock release buttons. Lock release button Rear center seat ...
Page 147 3-3. Adjusting the seats ■ Installing the head restraints Front seats  Align the head restraint with the installa- tion holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint. Lock release button Rear outside seats ...
Page 148 3-3. Adjusting the seats ■ Adjusting the height of the front seat head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. ■ Adjusting the rear center seat head restraint Always raise the head restraint one level from the stowed position when using.
Page 149: Steering Wheel
3-4. Adjusting the steering wheel and mirrors Steering wheel Adjustment procedure Hold the steering wheel and push the lever down. Adjust to the ideal position by moving the steering wheel hori- zontally and vertically. After adjustment, pull the lever up to secure the steering wheel.
Page 150 3-4. Adjusting the steering wheel and mirrors ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. WARNING ■ Caution while driving Do not adjust the steering wheel while driving.
Page 151: Inside Rear View Mirror
3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable suffi- cient confirmation of the rear view. Adjusting the height of rear view mirror The height of the rear view mirror can be adjusted to suit your driving posture.
Page 152: Outside Rear View Mirrors
3-4. Adjusting the steering wheel and mirrors Outside rear view mirrors Adjustment procedure To select a mirror to adjust, turn the switch. Left Right To adjust the mirror, operate the switch. Right Down Left C-HR_OM_USA_OM10634U...
Page 153 3-4. Adjusting the steering wheel and mirrors Folding and extending the mirrors Manual type  Push the mirror back in the direc- tion of the rear of the vehicle. Power type  Folds the mirrors Extends the mirrors Putting the outside rear view mirror folding switch in the neutral posi- tion sets the mirrors to automatic mode.
Page 154 3-4. Adjusting the steering wheel and mirrors ■ Mirror angle can be adjusted when Vehicles without a smart key system: The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system: The engine switch is in ACCESSORY or IGNITION ON mode. ■...
Page 155: Opening And Closing
3-5. Opening and closing the windows Power windows Opening and closing procedures The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Closing One-touch closing Opening One-touch opening : To stop the window partway, oper- ate the switch in the opposite direc- tion.
Page 156 3-5. Opening and closing the windows ■ The power windows can be operated when Vehicles without a smart key system: The engine switch is in the “ON” position. Vehicles with a smart key system: The engine switch is in IGNITION ON mode. ■...
Page 157 1 second or more. If you release the switch while the window is moving, start again from the beginning. If the window reverses and cannot be fully closed or opened, have the vehicle inspected by your Toyota dealer. C-HR_OM_USA_OM10634U...
Page 158 ● The power windows can be opened using the wireless remote control. (P. 118) : These settings must be customized at your Toyota dealer. ■ Power window open reminder function The buzzer sounds and a message is shown on the multi-information display in the instrument cluster when the engine switch is turned off and the driver’s...
Page 159 3-5. Opening and closing the windows WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Closing the windows ● When using the wireless remote control, key or mechanical key (P. 110) and operating the power windows, operate the power window after check- ing to make sure that there is no possibility of any passenger having any of their body parts caught in the side window.
Page 160 3-5. Opening and closing the windows C-HR_OM_USA_OM10634U...
Page 161: Driving
........218 Cargo and luggage ... 172 4-5. Using the driving Vehicle load limits ..... 175 support systems Trailer towing..... 176 Toyota Safety Sense P ..222 Dinghy towing ....177 PCS (Pre-Collision 4-2. Driving procedures System)......228 Engine (ignition) switch...
Page 162: Before Driving
4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving: Starting the engine P. 178, 181 Driving With the brake pedal depressed, shift the shift lever to D. (P. 188) Release the parking brake. (P. 195) If the parking brake is in automatic mode, the parking brake is released automatically when shifting the shift lever to any position other than P.
Page 163 4-1. Before driving Parking the vehicle With the shift lever in D, depress the brake pedal. Set the parking brake (P. 195), and shift the shift lever to P. (P. 188) If parking on a hill, block the wheels as needed. Vehicles without a smart key system: Turn the engine switch to the “LOCK”...
Page 164 4-1. Before driving ■ When starting off on an uphill The hill-start assist control will activate. (P. 287) ■ Driving in the rain ● Drive carefully when it is raining, because visibility will be reduced, the win- dows may become fogged-up, and the road will be slippery. ●...
Page 165 4-1. Before driving ■ Breaking in your new Toyota To extend the life of the vehicle, observing the following precautions is recom- mended: ● For the first 186 miles (300 km): Avoid sudden stops. ● For the first 621 miles (1000 km): •...
Page 166 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When driving the vehicle ● Do not drive if you are unfamiliar with the location of the brake and accel- erator pedals to avoid depressing the wrong pedal.
Page 167 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When driving on slippery road surfaces ● Sudden braking, acceleration and steering may cause tire slippage and reduce your ability to control the vehicle. ●...
Page 168 If you hear a squealing or scraping noise (brake pad wear limit indica- tors) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage may result if the pads are not replaced when needed.
Page 169 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When the vehicle is parked ● Do not leave cigarette lighters in the vehicle. If a cigarette lighter is in a place such as the glove box or on the floor, it may be lit accidentally when luggage is loaded or the seat is adjusted, causing a fire.
Page 170 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When braking ● When the brakes are wet, drive more cautiously. Braking distance increases when the brakes are wet, and this may cause one side of the vehicle to brake differently than the other side.
Page 171 Short in electrical components ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following: ● Brake function ●...
Page 172: Cargo And Luggage
Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. (P. 175) Toyota does not recommend towing a trailer with your vehicle. Your vehicle is not designed for trailer towing. C-HR_OM_USA_OM10634U...
Page 173 4-1. Before driving Calculation formula for your vehicle Cargo capacity Total load capacity (vehicle capacity weight) (P. 464) When 2 people with the combined weight of A lb. (kg) are riding in your vehicle, which has a total load capacity (vehicle capacity weight) of B lb.
Page 174 4-1. Before driving WARNING ■ Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compart- ment: Receptacles containing gasoline ● ● Aerosol cans ■ Storage precautions Observe the following precautions. Failure to do so may prevent the pedals from being depressed properly, may block the driver’s vision, or may result in items hitting the driver or passengers, possibly causing an accident.
Page 175: Vehicle Load Limits
Seating capacity means the maximum number of occupants whose estimated average weight is 150 lb. (68 kg) per person. ◆ Towing capacity Toyota does not recommend towing a trailer with your vehicle. ◆ Cargo capacity Cargo capacity may increase or decrease depending on the weight and the number of occupants.
Page 176: Trailer Towing
Trailer towing Toyota does not recommend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicy- cle, etc. Your vehicle is not designed for trailer towing or for the use of tow hitch mounted carriers.
Page 177: Dinghy Towing
4-1. Before driving Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with all four wheels on the ground. C-HR_OM_USA_OM10634U...
Page 178: Engine (Ignition) Switch (Vehicles Without A
4-2. Driving procedures Engine (ignition) switch (vehicles without a smart key system) Starting the engine Check that the parking brake is set. Check that the shift lever is in P. Firmly depress the brake pedal. Turn the engine switch to the “START” position to start the engine. Changing the engine switch positions “LOCK”...
Page 179 “LOCK” position. ■ If the engine does not start The engine immobilizer system may not have been deactivated. (P. 81) Contact your Toyota dealer. ■ When the steering lock cannot be released When starting the engine, the engine switch may seem stuck in the “LOCK”...
Page 180 Do not crank the engine for more than 30 seconds at a time. This may overheat the starter and wiring system. ● Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately. C-HR_OM_USA_OM10634U...
Page 181: Engine (Ignition) Switch (Vehicles With A Smart Key System)
4-2. Driving procedures Engine (ignition) switch (vehicles with a smart key system) Performing the following operations when carrying the elec- tronic key on your person starts the engine or changes engine switch modes. Starting the engine Check that the parking brake is set. Check that the shift lever is in P.
Page 182 4-2. Driving procedures Stopping the engine Stop the vehicle. Set the parking brake (P. 195), and shift the shift lever to P. Press the engine switch. Release the brake pedal and check that “ACCESSORY” on the multi-information display is off. Changing engine switch modes Modes can be changed by pressing the engine switch with brake pedal released.
Page 183 4-2. Driving procedures When stopping the engine with the shift lever in a position other than P If the engine is stopped with the shift lever in a position other than P, the engine switch will not be turned off but instead be turned to ACCESSORY mode.
Page 184 If the engine does not start ● The engine immobilizer system may not have been deactivated. (P. 81) Contact your Toyota dealer. ● Check that the shift lever is securely set in P. The engine may not start if the shift lever is displaced out of P.
Page 185 When the “Smart Key System Malfunction. See Owner’s Manual.” is dis- played on the multi-information display The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ■ If the electronic key battery is depleted P. 383 ■...
Page 186 4-2. Driving procedures WARNING ■ Stopping the engine in an emergency ● If you want to stop the engine in an emergency while driving the vehicle, press and hold the engine switch for more than 2 seconds, or press it briefly 3 times or more in succession.
Page 187 Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately. ■ Symptoms indicating a malfunction with the engine switch If the engine switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction.
Page 188: Continuously Variable Transmission
4-2. Driving procedures Continuously variable transmission Shifting the shift lever Vehicles without a smart key system: While the engine switch is in the “ON” position and the brake pedal depressed , shift the shift lever while pushing the shift release button on the shift knob. Vehicles with a smart key system: While the engine switch is in IGNITION ON mode and the brake pedal depressed*, shift the shift lever while pushing the...
Page 189 4-2. Driving procedures Shift position purpose Shift position Objective or function Parking the vehicle/starting the engine Reversing Neutral Normal driving 7-speed sport sequential shiftmatic mode driving (P. 189) : To improve fuel efficiency and reduce noises, set the shift lever in D for normal driving.
Page 190 M This may indicate a malfunction in the continuously variable transmission system. Have the vehicle inspected by your Toyota dealer immediately. (In this situation, the transmission will operate in the same manner as when the shift lever is in D.)
Page 191 If the shift lever cannot be shifted with your foot on the brake pedal while pressing the button on the shift knob, there may be a problem with the shift lock system. Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 192 4-2. Driving procedures WARNING ■ When driving on slippery road surfaces Be careful of downshifting and sudden acceleration, as this could result in the vehicle skidding to the side or spinning. ■ To prevent an accident when releasing the shift lock Before pressing the shift lock override button, make sure to set the parking brake and depress the brake pedal.
Page 193: Turn Signal Lever
4-2. Driving procedures Turn signal lever Operating instructions Right turn Lane change to the right (move the lever partway and release The right hand signals will flash 3 times. Lane change to the left (move the lever partway and release The left hand signals will flash 3 times.
Page 194: Parking Brake
4-2. Driving procedures Parking brake A selections can be made as desired from the following modes. Automatic mode The parking brake is set or released automatically according to shift lever operation. Even when in automatic mode, the parking brake can be set and released manually.
Page 195 4-2. Driving procedures Manual mode The parking brake can be set and released manually. Pull the parking brake switch to set the parking brake (U.S.A.) The parking brake indicator light and parking brake lamp will turn (Canada) Pull and hold the parking brake switch if an emergency occurs and it is necessary to operate the park- ing brake while driving.
Page 196 Operate the parking brake switch. If the message does not disappear after operating the switch several times, the system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ■ Parking brake operation sound When the parking brake operates, a motor sound (whirring sound) may be heard.
Page 197 4-2. Driving procedures ■ Parking brake indicator light and parking brake lamp ● Depending on the engine switch position/mode, the parking brake indicator light and parking brake lamp will turn on and stay on as described below: Vehicles without a smart key system ...
Page 198 When the parking brake cannot be released due to a malfunction Driving the vehicle with the parking brake set will lead to brake components overheating, which may affect braking performance and increase brake wear. Have the vehicle inspected by your Toyota dealer immediately if this occurs. C-HR_OM_USA_OM10634U...
Page 199: Brake Hold
4-2. Driving procedures Brake Hold The brake hold system keeps the brake applied when the shift lever is in a forward driving position or N with the system on and the brake pedal has been depressed to stop the vehicle. The system releases the brake when the accelerator pedal is depressed with the shift lever in the forward driving position to allow smooth start off.
Page 200 Make sure that the parking brake indicator light goes off. (P. 194) ■ When an inspection at your Toyota dealer is necessary When the brake hold standby indicator (green) does not illuminate even when the brake hold switch is pressed with the brake hold system operating condi- tions met, the system may be malfunctioning.
Page 201 4-2. Driving procedures WARNING ■ When the vehicle is on a steep incline When using the brake hold system on a steep incline exercise caution. The brake hold function may not hold the vehicle in such a situation. ■ When stopped on a slippery road The system cannot stop the vehicle when the gripping ability of the tires has been exceeded.
Page 202: Operating The Lights And Wipers
4-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Operating instructions Operating the switch turns on the lights as follows: For U.S.A.  headlights, side marker, parking lights, daytime running lights (P. 204) and so on turn on and off auto- matically.
Page 203 4-3. Operating the lights and wipers For Canada  headlights, side marker, parking lights, daytime running lights (P. 204) and so on turn on and off auto- matically. (When engine switch is in the “ON” position [vehicles with- out a smart key system] or IGNITION ON mode [vehicles with a smart key system])
Page 204 4-3. Operating the lights and wipers ■ Daytime running light system ● The daytime running lights illuminate using the same lights as the parking lights and illuminate brighter than the parking lights. ● To make your vehicle more visible to other drivers during daytime driving, the daytime running lights turn on automatically when all of the following conditions are met.
Page 205 4-3. Operating the lights and wipers ■ Automatic light off system Vehicles without a smart key system  ● When the headlights are on: The headlights and tail lights turn off 30 sec- onds after the engine switch is turned to the “ACC” or “LOCK” position and a door is opened and closed.
Page 206 ■ If “Headlight System Malfunction. Visit Your Dealer.” is displayed on the multi-information display The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer. ■ Customization Settings (e.g. light sensor sensitivity) can be changed. (Customizable features: P. 495) NOTICE ■...
Page 207: Automatic High Beam
4-3. Operating the lights and wipers Automatic High Beam The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of vehicles ahead etc., and automatically turns the high beam on or off as necessary.
Page 208 4-3. Operating the lights and wipers Turning the high beam on/off manually Switching to low beam ■ Pull the lever to the original position. The Automatic High Beam indi- cator will turn off. Push the lever away from you to activate the Automatic High...
Page 209 4-3. Operating the lights and wipers ■ High beam automatic turning on or off conditions ● When all of the following conditions are fulfilled, the high beam will be auto- matically turned on (after approximately 1 second): • Vehicle speed is above approximately 21 mph (34 km/h). •...
Page 210 4-3. Operating the lights and wipers ● The high beam may be turned on or off when the driver does not expect it. ● Bicycles or similar objects may not be detected. ● In the situations shown below, the system may not be able to accurately detect surrounding brightness levels.
Page 211 3 times. Automatic High Beam (headlights) may turn on even the vehicle is stopped. ■ If “Headlight System Malfunction. Visit Your Dealer.” is displayed on the multi-information display The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer.
Page 212: Fog Light Switch
4-3. Operating the lights and wipers Fog light switch  The fog lights secure excellent visibility in difficult driving con- ditions, such as in rain and fog. Operating instructions Turns the front fog lights off Turns the front fog lights on : For U.S.A.
Page 213: Windshield Wipers And Washer
4-3. Operating the lights and wipers Windshield wipers and washer Operating the wiper lever Operating the lever operates the wipers or washer as follows: When intermittent windshield wiper operation is selected, the wiper interval can be also adjusted. Intermittent windshield wiper operation Low speed windshield wiper operation...
Page 214 4-3. Operating the lights and wipers Wiper intervals can be adjusted when intermittent operation is selected. Increases the intermittent wind- shield wiper frequency Decreases intermittent windshield wiper frequency Washer/wiper dual oper- ation Pulling the lever operates the wipers and washer. Wipers will automatically operate a couple of times after the washer squirts.
Page 215 Damage to the washer fluid pump may be caused if the lever is pulled toward you and held continually. ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
Page 216: Rear Window Wiper And Washer
4-3. Operating the lights and wipers Rear window wiper and washer Operating instructions Operating the switch turns on the rear wiper as follows: Intermittent window wiper oper- ation Normal window wiper operation : For U.S.A. : For Canada Washer/wiper dual oper- ation Pushing the lever operates the wiper and washer.
Page 217 Do not operate the switch continually as the washer fluid pump may over- heat. ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
Page 218: Refueling
4-4. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: Before refueling the vehicle ● Vehicles without a smart key system Turn the engine switch to the “LOCK” position and ensure that all the doors and windows are closed.
Page 219 4-4. Refueling WARNING ■ When refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● After exiting the vehicle and before opening the fuel door, touch an unpainted metal surface to discharge any static electricity.
Page 220 4-4. Refueling Opening the fuel tank cap Press the opener to open the fuel filler door. Turn the fuel tank cap slowly to remove it and hang it on the back of the fuel filler door. ■ When the fuel filler door cannot be opened Open the back door and remove the cover underneath the luggage compart- ment light.
Page 221 WARNING ■ When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 222: Using The Driving Support Systems
■ Toyota Safety Sense P The Toyota Safety Sense P is designed to operate under the assumption that the driver will drive safely, and is designed to help reduce the impact to the occupants and the vehicle in the case of a collision or assist the driver in normal driving conditions.
Page 223 Toyota will not disclose the recorded data to a third party except: • With the consent of the vehicle owner or with the consent of the lessee if the vehicle is leased •...
Page 224 4-5. Using the driving support systems Sensors Two types of sensors, located behind the front grille and windshield, detect information necessary to operate the drive assist systems. Radar sensor Camera sensor WARNING ■ To avoid malfunction of the radar sensor Observe the following precautions.
Page 225 Do not subject the radar sensor or surrounding area to a strong impact. If the radar sensor, front grille, or front bumper has been subjected to a strong impact, have the vehicle inspected by your Toyota dealer. ● Do not disassemble the radar sensor.
Page 226 ● Do not attach any accessories that may obstruct the camera sensor to the hood, front grille or front bumper. Contact your Toyota dealer for details. ● If a surfboard or other long object is to be mounted on the roof, make sure that it will not obstruct the camera sensor.
Page 227 4-5. Using the driving support systems ■ Certification C-HR_OM_USA_OM10634U...
Page 228: Pcs (Pre-Collision System)
4-5. Using the driving support systems PCS (Pre-Collision System) The pre-collision system uses a radar sensor and camera sen- sor to detect vehicles and pedestrians in front of your vehicle. When the system determines that the possibility of a frontal col- lision with a vehicle or pedestrian is high, a warning operates to urge the driver to take evasive action and the potential brake pressure is increased to help the driver avoid the collision.
Page 229 4-5. Using the driving support systems ◆ Pre-collision warning When the system determines that the possibility of a frontal collision is high, a buzzer will sound and a warning message will be displayed on the multi- information display to urge the driver to take evasive action.
Page 230 4-5. Using the driving support systems WARNING ■ Limitations of the pre-collision system ● The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. Do not use the pre-collision system instead of normal braking operations under any circumstances.
Page 231 4-5. Using the driving support systems WARNING ■ When to disable the pre-collision system In the following situations, disable the system, as it may not operate prop- erly, possibly leading to an accident resulting in death or serious injury: ● When the vehicle is being towed ●...
Page 232 4-5. Using the driving support systems Changing settings of the pre-collision system Enabling/disabling the pre-collision system ■ The pre-collision system can be enabled/disabled on the multi- information display. The system is automatically enabled each time the engine switch is turned to the “ON” position (vehicles without a smart key system) or turned to IGNITION ON mode (vehicles with a smart key system).
Page 233 4-5. Using the driving support systems Changing the pre-collision warning timing ■ The pre-collision warning timing can be changed on the multi-infor- mation display. The operation timing setting is retained when the engine switch is turned off. Press “” or “” of meter control switches and select Press “”...
Page 234 4-5. Using the driving support systems ■ Operational conditions The pre-collision system is enabled and the system determines that the pos- sibility of a frontal collision with a vehicle or pedestrian is high. Each function is operational at the following speeds: ●...
Page 235 4-5. Using the driving support systems ■ Pedestrian detection function The pre-collision system detects pedestri- ans based on the size, profile, and motion of a detected object. However, a pedes- trian may not be detected depending on the surrounding brightness motion, posture, angle...
Page 236 4-5. Using the driving support systems • When rapidly closing on a vehicle ahead • If the front of the vehicle is raised or lowered, such as when the road sur- face is uneven or undulating • When approaching objects on the roadside, such as guardrails, utility poles, trees, or walls •...
Page 237 4-5. Using the driving support systems • When passing through a place with a low structure above the road (low ceil- ing, traffic sign, etc.) • When passing under an object (bill- board, etc.) at the top of an uphill road •...
Page 238 4-5. Using the driving support systems ■ Situations in which the system may not operate properly ● In some situations such as the following, a vehicle may not be detected by the radar sensor and camera sensor, preventing the system from operating properly: •...
Page 239 4-5. Using the driving support systems • When driving in inclement weather such as heavy rain, fog, snow or a sandstorm • When the vehicle is hit by water, snow, dust, etc., from a vehicle ahead • When driving through steam or smoke •...
Page 240 4-5. Using the driving support systems ● In some situations such as the following, sufficient braking force may not be obtained, preventing the system from performing properly: • If the braking functions cannot operate to their full extent, such as when the brake parts are extremely cold, extremely hot, or wet •...
Page 241 If the PCS warning light continues to flash or remains illuminated or the warning message does not disappear even though the vehicle has returned to normal, the system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ■ If VSC is disabled ●...
Page 242: Lda (Lane Departure Alert With Steering Control)
4-5. Using the driving support systems LDA (Lane Departure Alert with steering control) Summary of functions When driving on highways and freeways with white (yellow) lines, this function alerts the driver when the vehicle might depart from its lane and provides assistance by operating the steering wheel to keep the vehicle in its lane.
Page 243 4-5. Using the driving support systems ◆ Steering control function When the system determines that the vehicle might depart from its lane, the system pro- vides assistance as necessary by operating the steering wheel in small amounts for a short period of time to keep the vehi- cle in its lane.
Page 244 4-5. Using the driving support systems WARNING ■ Before using LDA system Do not rely solely upon the LDA system. The LDA system does not auto- matically drive the vehicle or reduce the amount of attention that must be paid to the area in front of the vehicle. The driver must always assume full responsibility for driving safely by paying careful attention to the surround- ing conditions and operating the steering wheel to correct the path of the vehicle.
Page 245 Do not install or place anything on the hood or grille. Also, do not install a grille guard (bull bars, kangaroo bar, etc.). ● If your windshield needs repairs, contact your Toyota dealer. Turning LDA system on Press the LDA switch to turn the LDA system on.
Page 246 4-5. Using the driving support systems Indications on multi-information display LDA indicator The illumination condition of the indicator informs the driver of the system operation status. Illuminated in white: LDA system is operating. Illuminated in green: Steering wheel assistance of the steering control function is operat- ing.
Page 247 4-5. Using the driving support systems ■ Operation conditions of each function ● Lane departure alert function This function operates when all of the following conditions are met. • LDA is turned on. • Vehicle speed is approximately 32 mph (50 km/h) or more. •...
Page 248 4-5. Using the driving support systems ■ Temporary cancellation of functions When the operation conditions are no longer met, a function may be tempo- rarily canceled. However, when the operation conditions are met again, oper- ation of the function is automatically restored. (P. 247) ■...
Page 249 4-5. Using the driving support systems ■ Conditions in which functions may not operate properly In the following situations, the camera sensor may not detect white (yellow) lines and various functions may not operate normally. ● There are shadows on the road that run parallel with, or cover, the white (yellow) lines.
Page 250 Warning message Details/Actions “Lane Departure The system may not be operating properly. Alert  Have the vehicle inspected at your Toyota Malfunction. dealer. Visit Your Dealer.” Dirt, rain, condensation, ice, snow, etc., are present on the windshield in front of the camera “Front Camera...
Page 251 4-5. Using the driving support systems ■ Customization The following settings can be changed. Function Setting details Lane departure alert function Adjust alert sensitivity Steering control function Turn steering wheel assistance on and off Turn function on and off Vehicle sway warning function Adjust alert sensitivity For how to change settings, refer to P.
Page 252: Dynamic Radar Cruise ControlWith Full-Speed Range
4-5. Using the driving support systems Dynamic radar cruise controlwith full-speed range Summary of functions In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates, decelerates and stops to match the speed changes of the preceding vehicle even if the accelerator pedal is not depressed. In constant speed control mode, the vehicle runs at a fixed speed.
Page 253 4-5. Using the driving support systems WARNING ■ Before using dynamic radar cruise control with full-speed range ● Driving safely is the sole responsibility of the driver. Do not rely solely on the system, and drive safely by always paying careful attention to your sur- roundings.
Page 254 4-5. Using the driving support systems WARNING ● Assisting the driver to operate the vehicle The dynamic radar cruise control with full-speed range has limited capabil- ity to prevent or avoid a collision with a vehicle traveling ahead. Therefore, if there is ever any danger, the driver must take immediate and direct con- trol of the vehicle and act appropriately in order to ensure the safety of all involved.
Page 255 4-5. Using the driving support systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar sensor to detect the presence of vehicles up to approximately 328 ft. (100 m) ahead, determines the current vehicle-to-vehicle following distance, and operates to maintain a suit- able following distance from the vehicle ahead.
Page 256 4-5. Using the driving support systems Example of constant speed cruising When there are no vehicles ahead The vehicle travels at the speed set by the driver. The desired vehicle-to- vehicle distance can also be set by operating the vehicle-to-vehicle dis- tance switch.
Page 257 4-5. Using the driving support systems Setting the vehicle speed (vehicle-to-vehicle distance control mode) Press the “ON-OFF” button to activate the cruise control. Radar cruise control indicator will come on and a message will be displayed on the multi-information display. Press the button again to deacti- vate the cruise control.
Page 258 4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the lever until the desired set speed is displayed. Increases the speed (Except when the vehicle has been stopped by system control in vehi- cle-to-vehicle distance control...
Page 259 4-5. Using the driving support systems Changing the vehicle-to-vehicle distance (vehicle-to-vehicle dis- tance control mode) Pressing the switch changes the Preceding vehicle mark vehicle-to-vehicle distance as fol- lows: Long Medium Short The vehicle-to-vehicle distance is set automatically to long mode when the engine switch is turned to the “ON”...
Page 260 4-5. Using the driving support systems Resuming follow-up cruising when the vehicle has been stopped by system control (vehicle-to-vehicle distance control mode) After the vehicle ahead of you starts off, push the lever up. Your vehicle will also resume follow-up cruising if the accelera- tor pedal is depressed after the vehicle ahead of you starts off.
Page 261 4-5. Using the driving support systems Approach warning (vehicle-to-vehicle distance control mode) When your vehicle is too close to a vehicle ahead, and sufficient automatic deceleration via the cruise control is not possible, the display will flash and the buzzer will sound to alert the driver.
Page 262 4-5. Using the driving support systems Selecting constant speed control mode When constant speed control mode is selected, your vehicle will main- tain a set speed without controlling the vehicle-to-vehicle distance. Select this mode only when vehicle-to-vehicle distance control mode does not function correctly due to a dirty radar sensor, etc.
Page 263 • The driver’s door is opened. • The vehicle has been stopped for about 3 minutes. If vehicle-to-vehicle distance control mode is automatically canceled for any other reason, there may be a malfunction in the system. Contact your Toyota dealer. C-HR_OM_USA_OM10634U...
Page 264 ● Pre-collision braking is activated. If constant speed control mode is automatically canceled for any other rea- son, there may be a malfunction in the system. Contact your Toyota dealer. ■ Brake system operation sound If the brakes are applied automatically while the vehicle is in vehicle-to-vehi- cle distance control mode, a brake system operation sound may be heard.
Page 265 4-5. Using the driving support systems ● Vehicles with small rear ends (trailers with no load on board, etc.) ● Motorcycles traveling in the same lane ● When water or snow thrown up by the surrounding vehicles hinders the detecting of the sensor ●...
Page 266 4-5. Using the driving support systems ■ Conditions under which the vehicle-to-vehicle distance control mode may not function correctly In the case of the following conditions, operate the brake pedal (or accelera- tor pedal, depending on the situation) as necessary. As the sensor may not be able to correctly detect vehicles ahead, the system may not operate properly.
Page 267: Driving Mode Select
4-5. Using the driving support systems Driving mode select In response to driving conditions, one of 3 drive modes can be selected. Select the drive mode Changing the driving mode ■ To select the drive mode, perform operations on the multi-information display.
Page 268 4-5. Using the driving support systems Driving modes ■ ● “NORMAL” mode Provides an optimal balance of fuel economy, quietness, and dynamic performance. Suitable for city driving. ● “SPORT” mode Controls the transmission and engine to provide quick, powerful acceleration. This mode also changes the steering feel, making it suitable for when agile driving response is desired, such as when driving on roads with many curves.
Page 269: Bsm (Blind Spot Monitor)
4-5. Using the driving support systems BSM (Blind Spot Monitor)  Summary of the Blind Spot Monitor The Blind Spot Monitor is a system that uses rear side radar sensors installed on the inner side of the rear bumper on the left and right side to assist the driver in confirming safety when changing lanes.
Page 270 When “Blind Spot Monitor System Malfunction. Visit Your Dealer.” is shown on the multi-information display There may be a sensor malfunction or misaligned. Have the vehicle inspected by your Toyota dealer. ■ Customization Some functions can be customized. (P. 496)
Page 271 4-5. Using the driving support systems ■ Certification for the Blind Spot Monitor For vehicles sold in U.S.A.  For vehicles sold in Canada  C-HR_OM_USA_OM10634U...
Page 272 Do not attach accessories or stickers to the sensor or surrounding area on the bumper. ● Do not modify the sensor or surrounding area on the bumper. ● Do not paint the rear bumper any color other than an official Toyota color. C-HR_OM_USA_OM10634U...
Page 273 4-5. Using the driving support systems BSM function The BSM function uses radar sensors to detect the following vehicles traveling in adjacent lanes and advises the driver of the presence of such vehicles via the indicators on the outside rear view mirrors. Vehicles that are traveling in areas that are not visible using the out- side rear view mirrors (the blind spots) Vehicles that are approaching rapidly from behind in areas that are...
Page 274 4-5. Using the driving support systems BSM function detection areas The areas that vehicles can be detected in are outlined below. The range of each detection area is: Approximately 1.6 ft. (0.5 m) to 11.5 ft. (3.5 m) from either side of the vehicle : The area between the side of the vehicle and 1.6 ft.
Page 275 4-5. Using the driving support systems WARNING ■ Cautions regarding the use of the system The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. The Blind Spot Monitor function is a supplementary function which alerts the driver that a vehicle is present in the blind spot.
Page 276 4-5. Using the driving support systems ■ Conditions under which the BSM function may not function correctly ● The BSM function may not detect vehicles correctly in the following situa- tions: • When the sensor is misaligned due to a strong impact to the sensor or its surrounding area •...
Page 277 4-5. Using the driving support systems ● Instances of the BSM function unnecessarily detecting a vehicle and/or object may increase in the following situations: • When the sensor is misaligned due to a strong impact to the sensor or its surrounding area •...
Page 278: Rcta (Rear Cross Traffic Alert)
4-5. Using the driving support systems RCTA (Rear Cross Traffic Alert)  Summary of the Rear Cross Traffic Alert The RCTA function uses the BSM rear side radar sensors installed behind the rear bumper. This function is intended to assist the driver in checking areas that are not easily visible when backing up.
Page 279 ■ When “RCTA Malfunction Visit Your Dealer.” is shown on the multi-infor- mation display There may be a sensor malfunction or misaligned. Have the vehicle inspected by your Toyota dealer. ■ Rear side radar sensors P. 272 C-HR_OM_USA_OM10634U...
Page 280 4-5. Using the driving support systems RCTA function The RCTA functions when your vehicle is in reverse. It can detect other vehicles approaching from the right or left rear of the vehicle. It uses radar sensors to alert the driver of the other vehicle’s existence through flashing the outside rear view mirror indicators and sounding a buzzer.
Page 281 4-5. Using the driving support systems RCTA function detection areas The areas that vehicles can be detected in are outlined below. To give the driver a more consistent time to react, the buzzer can alert for faster vehicles from farther away. Example: Approximate Approaching vehicle...
Page 282 4-5. Using the driving support systems ■ The RCTA function is operational when The RCTA function operates when all of the following conditions are met: ● The RCTA system is set to on. (P. 279) ● The shift position is in R. ●...
Page 283 4-5. Using the driving support systems ■ Conditions under which the RCTA function will not detect a vehicle The RCTA function is not designed to detect the following types of vehicles and/or objects: ● Vehicles approaching from directly behind ● Vehicles backing up in a parking space next to your vehicle ●...
Page 284 4-5. Using the driving support systems ■ Conditions under which the RCTA function may not function correctly ● The RCTA function may not detect vehicles correctly in the following situa- tions: • When the sensor is misaligned due to a strong impact to the sensor or its surrounding area •...
Page 285 4-5. Using the driving support systems ● Instances of the RCTA function unnecessarily detecting a vehicle and/or object may increase in the following situations: • When a vehicle passes by the side of your vehicle • When the parking space faces a street and vehicles are being driven on the street •...
Page 286: Driving Assist Systems
4-5. Using the driving support systems Driving assist systems To keep driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehi- cle.
Page 287 4-5. Using the driving support systems ◆ Hill-start assist control Helps to reduce the backward movement of the vehicle when start- ing on an uphill ◆ EPS (Electric Power Steering) Employs an electric motor to reduce the amount of effort needed to turn the steering wheel.
Page 288 TRAC has been disabled even if has not been pressed TRAC is temporary deactivated. If the information continues to show, contact your Toyota dealer. ■ Sounds and vibrations caused by the ABS, brake assist, VSC, TRAC and hill-start assist control systems ●...
Page 289 4-5. Using the driving support systems ■ Automatic reactivation of TRAC and VSC systems After turning the TRAC and VSC systems off, the systems will be automati- cally re-enabled in the following situations: ● Vehicles without a smart key system: When the engine switch is turned to the “LOCK”...
Page 290 4-5. Using the driving support systems WARNING ■ The ABS does not operate effectively when ● The limits of tire gripping performance have been exceeded (such as excessively worn tires on a snow covered road). ● The vehicle hydroplanes while driving at high speed on wet or slick roads. ■...
Page 291 The ABS, TRAC and VSC systems will not function correctly if different tires are installed on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■ Handling of tires and the suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause a system to malfunction.
Page 292: Driving Tips
4-6. Driving tips Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a man- ner appropriate to the prevailing weather conditions. Preparation for winter ● Use fluids that are appropriate to the prevailing outside tempera- tures.
Page 293 If the shift lever can be shifted from P, there may be a problem with the shift lock system. Have the vehicle inspected by your Toyota dealer immediately. Selecting tire chains 17-inch tires ...
Page 294 4-6. Driving tips Regulations on the use of tire chains Regulations regarding the use of tire chains vary depending on loca- tion and type of road. Always check local regulations before installing chains. ■ Tire chain installation Observe the following precautions when installing and removing chains: ●...
Page 295 NOTICE ■ Repairing or replacing snow tires Request repairs or replacement of snow tires from Toyota dealers or legiti- mate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 296 4-6. Driving tips C-HR_OM_USA_OM10634U...
Page 297: Interior Features
Interior features 5-1. Using the air conditioning system and defogger Air conditioning system ..298 Heated steering wheel/ seat heaters ....306 5-2. Using the interior lights Interior lights list ....308 • Interior lights ....309 • Personal lights ....310 5-3.
Page 298: Air Conditioning System
5-1. Using the air conditioning system and defogger Air conditioning system Air outlets are automatically selected and fan speed is automati- cally adjusted according to the set temperature setting. Air conditioning controls Adjusting the temperature setting ■ Increases the temperature Decreases the temperature If the indicator is turned...
Page 299 5-1. Using the air conditioning system and defogger Fan speed setting ■ Increases the fan speed Decreases the fan speed Press to turn the fan off. Change the airflow mode ■ To change the airflow mode, move the airflow change knob upward or downward.
Page 300 5-1. Using the air conditioning system and defogger Using automatic mode Press The dehumidification function begins to operate. Air outlets and fan speed are automatically adjusted according to the temperature set- ting. Adjust the temperature setting. To stop the operation, press Automatic mode indicator ■...
Page 301 5-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes ■ Press The mode switches between outside air mode (indicator off) and recir- culated air mode (indicator on) each time is pressed. Defogging the windshield ■...
Page 302 5-1. Using the air conditioning system and defogger Climate control customization ■ Climate control setting can be changed. Press The air conditioning is controlled with low fuel consumption prioritized such as reducing fan speed, etc. Air outlets Location of air outlets ■...
Page 303 5-1. Using the air conditioning system and defogger ■ Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed.
Page 304 5-1. Using the air conditioning system and defogger ■ When the outside temperature exceeds 75°F (24°C) and the air condition- ing system is on ● In order to reduce the air conditioning power consumption, the air condition- ing system may switch to recirculated air mode automatically. This may also reduce fuel consumption.
Page 305 5-1. Using the air conditioning system and defogger WARNING ■ To prevent the windshield from fogging up ● Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, block- ing your vision.
Page 306: Heated Steering Wheel/ Seat Heaters
5-1. Using the air conditioning system and defogger Heated steering wheel  /seat heaters  Seat heaters heat the front seats. WARNING ● Care should be taken to prevent injury if anyone in the following categories comes in contact with the steering wheel and seats when the heater is on: •...
Page 307 5-1. Using the air conditioning system and defogger Heated steering wheel Turns the heated steering wheel on/off The indicator light comes on when the heated steering wheel is oper- ating. ■ Operation condition Vehicles without a smart key system  The heated steering wheel can be used when the engine switch is in the “ON”...
Page 308: Using The Interior Lights
5-2. Using the interior lights Interior lights list Vanity lights (if equipped) (P. 321) Front interior light/front personal lights (P. 309, 310) Rear interior light (P. 309) Engine switch light (vehicles with a smart key system) Glove box light (P. 312) Cup holder illumination (if equipped) Door trim lights (if equipped) C-HR_OM_USA_OM10634U...
Page 309: Interior Lights
5-2. Using the interior lights Interior lights Front ■ Turns the door position on/off Rear ■ Door position Operation is linked with the front interior light main switch. When the switch is off, the light does not illuminate. C-HR_OM_USA_OM10634U...
Page 310: Personal Lights
5-2. Using the interior lights Personal lights Turns the lights on/off When the lights are on due to the door link switch, a light will not turn off even if its switch is pressed. ■ Illuminated entry system Vehicles without a smart key system ...
Page 311: Using The Storage Features
5-3. Using the storage features List of storage features Glove box (P. 312) Cup holders (P. 314) Bottle holders (P. 313) Console box (P. 312) WARNING ● Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: •...
Page 312: Glove Box
5-3. Using the storage features Glove box Press the button to open the glove box. The glove box light turns on when the tail lights are on. Console box Lift the lid while pulling up the knob. When closing the lid, pass the wire of the electronic device through the location indicated in the illustration.
Page 313: Bottle Holders
5-3. Using the storage features Bottle holders Front Rear   ● When storing a bottle, close the cap. ● The bottle may not be stored depending on its size or shape. WARNING Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 314: Cup Holders
5-3. Using the storage features Cup holders The rear cup holder can have the partition turned over, removed, and the depth changed. WARNING ● Do not place anything other than cups or aluminum cans in the cup hold- ers. Other items may be thrown out of the holders in the event of an accident or sudden braking, causing injury.
Page 315: Luggage Compartment Features
5-3. Using the storage features Luggage compartment features Cargo hooks Cargo hooks are provided for securing loose items. WARNING To avoid injury, always return the cargo hooks to their positions when they are not in use. Grocery bag hooks NOTICE Do not hang any object heavier than 4.4 lb.
Page 316 5-3. Using the storage features Auxiliary boxes Lift the deck mat tab and pull it toward you to remove it. Side auxiliary boxes C-HR_OM_USA_OM10634U...
Page 317 5-3. Using the storage features Luggage cover Hard type  Unhook the cords and return the luggage cover to horizontal position. Type A  Pull it toward you and then lift the luggage cover to remove Installation position Confirm that the cover has been securely installed to the original position when install- ing.
Page 318 5-3. Using the storage features Soft type  Removing the luggage cover ■ Unhook the cords. Unhook the hook to the hook brackets. Stowing the luggage cover ■ Hold the luggage cover with both hands. Point your thumbs in opposite direc- tions.
Page 319 5-3. Using the storage features Bend one side of the cover towards you. Twist the other side in the opposite direction, as shown in the illustration. Make a small circle, then fold it inward. Make sure the three circles are side by side. C-HR_OM_USA_OM10634U...
Page 320 5-3. Using the storage features Make sure the luggage cover is properly folded. WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not place anything on the luggage cover. In the event of sudden brak- ing or turning, the item may go flying and strike an occupant.
Page 321: Using The Other Interior Features
5-4. Using the other interior features Other interior features Sun visors To set the visor in the forward position, flip it down. To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. To use the side extender, place the visor in the side position, then slide it backward.
Page 322: Power Outlet
5-4. Using the other interior features Power outlet Please use as a power supply for electronic goods that use less than 12 VDC/10 A (power consumption of 120 W). Lift the lid while pulling up the knob and open the console box. Open the cover.
Page 323: Assist Grips
5-4. Using the other interior features Assist grips An assist grip installed on the ceil- ing can be used to support your body while sitting on the seat. WARNING Do not use the assist grip when getting in or out of the vehicle or rising from your seat.
Page 324 5-4. Using the other interior features...
Page 325: Maintenance And Care
Maintenance and care 6-1. Maintenance and care 6-2. Maintenance Cleaning and protecting Maintenance the vehicle exterior..326 requirements ....333 Cleaning and protecting General maintenance..336 the vehicle interior... 330 Emission inspection and maintenance (I/M) programs......340 6-3. Do-it-yourself maintenance Do-it-yourself service precautions .....
Page 326: Maintenance And Care Cleaning And Protecting
6-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 327 6-1. Maintenance and care ■ Automatic car washes ● Fold the mirrors before washing the vehicle. Start washing from the front of the vehicle. Make sure to extend the mirrors before driving. ● Brushes used in automatic car washes may scratch the vehicle surface and harm your vehicle’s paint.
Page 328 Precaution regarding the rear bumper with Blind Spot Monitor (if equipped) If the paint of the rear bumper is chipped or scratched, the system may mal- function. If this occurs, consult your Toyota dealer. NOTICE ■ To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels, etc.)
Page 329 6-1. Maintenance and care NOTICE ■ Cleaning the exterior lights ● Wash carefully. Do not use organic substances or scrub with a hard brush. This may damage the surfaces of the lights. ● Do not apply wax to the surfaces of the lights. Wax may cause damage to the lenses.
Page 330: Cleaning And Protecting The Vehicle Interior
6-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior ● Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water.
Page 331 6-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 332 6-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use the following types of detergent, as they may discolor the vehi- cle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach •...
Page 333: Maintenance
Toyota recommends the following main- tenance: General maintenance General maintenance should be performed on a daily basis. This can be done by yourself or by a Toyota dealer. Scheduled maintenance Scheduled maintenance should be performed at specified intervals according to the maintenance schedule.
Page 334 ■ Repair and replacement It is recommended that genuine Toyota parts be used for repairs to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
Page 335 6-2. Maintenance WARNING ■ If your vehicle is not properly maintained Improper maintenance could result in serious damage to the vehicle and possible death or serious injury. ■ Handling of the battery ● Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm.
Page 336: General Maintenance
“Owner’s Warranty Information Booklet” or “Owner’s Manual Supplement/Sched- uled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment...
Page 337 6-2. Maintenance Vehicle interior Items Check points • The accelerator pedal should move smoothly Accelerator pedal (without uneven pedal effort or catching). Continuously variable • When parked on a slope and the shift lever is transmission “Park” in P, is the vehicle securely stopped? mechanism •...
Page 338 6-2. Maintenance Items Check points • Do the head restraints move smoothly and Head restraints lock securely? • Do the indicators and buzzers function prop- Indicators/buzzers erly? Lights • Do all of the lights come on? • Does the parking brake switch operate nor- mally? Parking brake •...
Page 339 6-2. Maintenance Vehicle exterior Items Check points Doors • Do the doors operate smoothly? • Does the engine hood lock system work prop- Engine hood erly? • There should not be any signs of fluid leakage Fluid leaks after the vehicle has been parked. •...
Page 340: Emission Inspection And Maintenance (I/M) Programs
The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. Your vehicle may not pass the I/M test in the following situations: ●...
Page 341: Do-It-Yourself Maintenance
(P. 353) • Rag or paper towel • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol-based non-silicate, non- amine, non-nitrite and non-borate coolant with long- life hybrid organic acid technology For the U.S.A.:...
Page 342 6-3. Do-it-yourself maintenance Items Parts and tools • Bulb with same number and wattage rating as origi- Light bulbs (P. 393) • Phillips-head screwdriver • Flathead screwdriver • Wrench Radiator and con-  denser (  P. 352) Tire inflation •...
Page 343 6-3. Do-it-yourself maintenance WARNING ■ When working near the electric cooling fan or radiator grille Vehicles without a smart key system: Be sure the engine switch is off. With the engine switch in the “ON” position, the electric cooling fan may automat- ically start to run if the air conditioning is on and/or the coolant temperature is high.
Page 344: Hood
6-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release lever. The hood will pop up slightly. Move the auxiliary catch lever to side direction and lift the hood.
Page 345 6-3. Do-it-yourself maintenance WARNING ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ■...
Page 346: Positioning A Floor Jack
6-3. Do-it-yourself maintenance Positioning a floor jack When using a floor jack, follow the instructions in the manual provided with the jack and perform the operation safely. When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury.
Page 347: Engine Compartment
6-3. Do-it-yourself maintenance Engine compartment Washer fluid tank (P. 359) Battery (P. 355) Engine coolant reservoir Brake fluid reservoir (P. 351) (P. 353) Fuse boxes (P. 387) Electric cooling fan Engine oil filler cap Condenser (P. 352) (P. 349) Radiator (P.
Page 348 6-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil ■ Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
Page 349 6-3. Do-it-yourself maintenance Adding engine oil ■ If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 350 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal. ●...
Page 351 If the coolant level drops within a short time of replenishing Visually check the radiator, hoses, engine coolant reservoir caps, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system.
Page 352 Radiator and condenser Check the radiator and condenser and clear away any foreign objects. If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. WARNING ■...
Page 353 6-3. Do-it-yourself maintenance Brake fluid Checking fluid level ■ The brake fluid level should be between the “MAX” and “MIN” lines on the tank. Adding fluid ■ Slide and lift up the rubber strip to partly remove it as shown. Disconnect the claws and remove the service cover.
Page 354 It is normal for the brake fluid level to go down slightly as the brake pads wear out or when the fluid level in the accumulator is high. However, if the reservoir needs frequent refilling, there may be a serious problem. Have the vehicle inspected at your Toyota dealer as soon as pos- sible.
Page 355 6-3. Do-it-yourself maintenance Battery Check the battery as follows. Battery exterior ■ Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. Terminals Hold-down clamp Checking battery fluid ■ If there are lines on the side of the battery: Check that the level is between the upper and lower lines.
Page 356 6-3. Do-it-yourself maintenance If there are not lines on the side of the battery: Check the fluid level as follows. Remove the vent plug. Check the fluid level by look- O.K. ing directly at the cell. If the fluid level is low, add dis- tilled water.
Page 357 Take extra care when connecting the bat- tery if the engine switch mode prior to discharge is unknown. If the system will not start even after multiple attempts at all methods above, contact your Toyota dealer.
Page 358 6-3. Do-it-yourself maintenance WARNING ■ Chemicals in the battery Batteries contain poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: ●...
Page 359 6-3. Do-it-yourself maintenance NOTICE ■ When recharging the battery Never recharge the battery while the engine is running. Also, be sure all accessories are turned off. ■ When adding distilled water Avoid overfilling. Water spilled during battery recharging may cause corro- sion.
Page 360 6-3. Do-it-yourself maintenance ● The washer fluid level is extremely low (type A) or at “LOW” (type Type A  Raise the cap keeping your finger pressed down on the hole in the center and check the fluid level in the tube.
Page 361 6-3. Do-it-yourself maintenance WARNING ■ When adding washer fluid Do not add washer fluid when the engine is hot or running as washer fluid contains alcohol and may catch fire if spilled on the engine, etc. NOTICE ■ Do not use any fluid other than washer fluid Do not use soapy water or engine antifreeze instead of washer fluid.
Page 362: Tires
Replace the tires if the treadwear indicators are showing on a tire. Tire rotation Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recommends that tire rotation is carried out at the same interval as tire inspection. Front...
Page 363 ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized. Have tire pressure warning valves and transmitter ID codes registered by your Toyota dealer. (P. 365) ◆ Initializing the tire pressure warning system When the tire size is changed, the tire pressure warning system must be initialized.
Page 364 6-3. Do-it-yourself maintenance How to initialize the tire pressure warning system ■ Park the vehicle in a safe place and turn the engine switch to the “LOCK” position (vehicles without a smart key system) or off (vehicles with a smart key system). Initialization cannot be performed while the vehicle is moving.
Page 365 ● A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. ■ Replacing tires and wheels If the ID code of the tire pressure warning valve and transmitter is not reg- istered, the tire pressure warning system will not work properly.
Page 366 6-3. Do-it-yourself maintenance ■ Maximum load of tire Check that the maximum load of the replacement tire is greater than 1/2 of the Gross Axle Weight Ratings (GAWR) of either the front axle or the rear axle, whichever is greater. For the GAWR, see the Certification Label.
Page 367 ● In the following cases, the tire pressure warning system may not operate properly. • If non-genuine Toyota wheels are used. • A tire has been replaced with a tire that is not an OE (Original Equip- ment) tire. • A tire has been replaced with a tire that is not of the specified size.
Page 368 If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. ● When operating the initialization of the system, the tire pressure warning light does not blink 3 times and the setting message does not appear on the multi-information display.
Page 369 6-3. Do-it-yourself maintenance ■ Tire pressure warning system certification For vehicles sold in the U.S.A.  For vehicles sold in Canada ...
Page 370 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
Page 371 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 372: Tire Inflation Pressure
6-3. Do-it-yourself maintenance Tire inflation pressure Tire inflation pressure The recommended cold tire infla- tion pressure and tire size are dis- played on the tire and loading information label. (P. 470)
Page 373 6-3. Do-it-yourself maintenance Inspection and adjustment procedure Tire valve Tire pressure gauge Remove the tire valve cap. Press the tip of the tire pressure gauge onto the tire valve. Read the pressure using the gauge gradations. If the tire inflation pressure is not at the recommended level, adjust the pressure.
Page 374 Reduced tire life due to wear ● Reduced safety ● Damage to the drivetrain If a tire needs frequent inflating, have it checked by your Toyota dealer. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●...
Page 375 6-3. Do-it-yourself maintenance WARNING ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. If the tires are not properly inflated, the following conditions may occur which could lead to an accident resulting in death or serious injury: ●...
Page 376: Wheels
● Used wheels ● Bent wheels that have been straightened Aluminum wheel precautions (if equipped) ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).
Page 377 6-3. Do-it-yourself maintenance WARNING ■ When replacing wheels ● Do not use wheels that are a different size from those recommended in the Owner’s Manual, as this may result in a loss of handling control. ● Never use an inner tube in a leaking wheel which is designed for a tubeless tire.
Page 378 Because tire repair or replacement may affect the tire pressure warn- ing valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
Page 379: Air Conditioning Filter
6-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method Turn the engine switch off. Open the glove box. Slide off the damper. Push in each side of the glove box to disconnect the claws, and then slowly and fully open the glove box while supporting...
Page 380 6-3. Do-it-yourself maintenance With the glove box fully open, slightly lift up the glove box and pull toward the seat to detach the bottom of the glove box. Do not use excessive force if the glove box does not detach when lightly pulled.
Page 381 6-3. Do-it-yourself maintenance Type B  Remove the filter cover. Unlock the filter cover. Move the filter cover in the direction of the arrow, and then pull it out of the claws. Remove the filter case. Remove the air conditioning fil- ter from the filter case and replace it with a new one.
Page 382 6-3. Do-it-yourself maintenance ■ Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, please refer to the “Schedule maintenance guide”...
Page 383: Wireless Remote Control/Electronic Key Battery
6-3. Do-it-yourself maintenance Wireless remote control/electronic key bat- tery Replace the battery with a new one if it is depleted. You will need the following items: ● Flathead screwdriver ● Small flathead screwdriver ● Lithium battery CR2032 Replacing the battery Vehicles without a smart key system ...
Page 384 6-3. Do-it-yourself maintenance Install the battery cover with the tab facing up. Push the entire edge of the battery cover into the key. Install the key cover. Align the key cover with the key and then press it straight into the key.
Page 385 When installing, reverse the steps listed. ■ Use a CR2032 lithium battery ● Batteries can be purchased at your Toyota dealer, local electrical appliance shops or camera stores. ● Replace only with the same or equivalent type recommended by the manu- facturer.
Page 386 6-3. Do-it-yourself maintenance WARNING ■ Removed battery and other parts These parts are small and if swallowed by a child, they can cause choking. Keep away from children. Failure to do so could result in death or serious injury. NOTICE ■...
Page 387: Checking And Replacing Fuses
6-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec- essary. Turn the engine switch off. Open the fuse box cover. Engine compartment type A fuse box ...
Page 388 6-3. Do-it-yourself maintenance Left side instrument panel  Remove the lid. Make sure to press the claw during removal or installation. Remove the fuse with the pull- out tool. Only type A fuses can be removed using the pullout tool.
Page 389 Except for type E: Replace the blown fuse with a new fuse of an appropriate amperage rat- ing. The amperage rating can be found on the fuse box lid. Type E: Contact your Toyota dealer. Type A Type B ...
Page 390 If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement. (P. 393) ● If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer. ■ If there is an overload in a circuit The fuses are designed to blow, protecting the wiring harness from damage.
Page 391: Headlight Aim (Vehicles With Front Fog Lights)
6-3. Do-it-yourself maintenance Headlight aim (vehicles with front fog lights) Vertical movement adjusting bolts Adjustment bolt A Adjustment bolt B Before checking the headlight aim Make sure the vehicle has a full tank of gasoline and the area around the headlight is not deformed. Park the vehicle on level ground.
Page 392 Turn bolt B the same number of turns and in the same direction as step If the headlight cannot be adjusted using this procedure, take the vehi- cle to your Toyota dealer to adjust the headlight aim.
Page 393: Light Bulbs
Light bulbs You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.
Page 394 6-3. Do-it-yourself maintenance Rear ■ Rear side marker lights Rear turn signal lights Back-up lights License plate lights...
Page 395 6-3. Do-it-yourself maintenance Replacing light bulbs Front side marker lights (bulb type) ■ Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed. Front turn signal lights (bulb type) ■ Turn the bulb base counter- clockwise.
Page 396 6-3. Do-it-yourself maintenance Rear turn signal lights and rear side marker lights ■ Open the back door and remove the cover. To prevent damaging the vehi- cle, wrap the flathead screw- driver with a tape. Remove the 2 screws and pull the light unit toward the rear of the vehicle to remove Turn the bulb base counter-...
Page 397 6-3. Do-it-yourself maintenance Install the lamp assembly. Align the guide ( ) and pins ) on the lamp assembly with the mounting when installing it. Install the 2 screws. Install the cover.
Page 398 6-3. Do-it-yourself maintenance Back-up lights ■ Open the back door and remove the cover. To prevent damaging the vehi- cle, wrap the flathead screw- driver with a tape. Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed.
Page 399 6-3. Do-it-yourself maintenance License plate lights ■ Open the back door and remove the cover. To prevent damaging the vehi- cle, wrap the flathead screw- driver with a tape. Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed.
Page 400 6-3. Do-it-yourself maintenance Side turn signal lights ■ Insert a flathead screwdriver and release the claw for the outside rear view mirror cover. To prevent damaging the vehi- cle, wrap the flathead screw- driver with a tape. Release the cover claws spanning over the entire perimeter.
Page 401 6-3. Do-it-yourself maintenance Insert a flathead screwdriver and remove the lens to the outside. Remove the socket from the side turn signal light housing. Remove the bulb. Replace the bulb and install the socket to the side turn signal light housing. Align the grooves of the socket to the side turn signal light hous- ing.
Page 402 6-3. Do-it-yourself maintenance Install the lens. Insert the claw of the lens. Attach the lens. Arrange the wire harness on the back side of the lens. Insert the claw of the cover. Attach the claw on the bot- tom part of the cover.
Page 403 Replacing the following bulbs ■ If any of the lights listed below has burnt out, have it replaced by your Toyota dealer. ● Headlights ● Parking lights/daytime running lights ● Front turn signal lights (vehicles with LED type) ●...
Page 404 6-3. Do-it-yourself maintenance ■ LED light bulbs The following lights consist of a number of LEDs. If any of the LEDs burns out, take your vehicle to your Toyota dealer to have the light replaced. ● Headlights ● Parking lights/daytime running lights ●...
Page 405 6-3. Do-it-yourself maintenance WARNING ■ Replacing light bulbs ● Turn off the lights. Do not attempt to replace the bulb immediately after turning off the lights. The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands. When it is unavoidable to hold the glass portion, use and hold with a clean dry cloth to avoid getting moisture and oils on the bulb.
Page 406 6-3. Do-it-yourself maintenance...
Page 407 When trouble arises 7-1. Essential information 7-2. Steps to take in an emergency Emergency flashers ..408 If your vehicle needs to If your vehicle has to be be towed ......412 stopped in an emergency ...... 409 If you think something is wrong ......
Page 408: Essential Information
7-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
Page 409: If Your Vehicle Has To Be Stopped In An Emergency
7-1. Essential information If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the follow- ing procedure: Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.
Page 410 7-1. Essential information Vehicles without a smart key system: Stop the engine by turning the engine switch to the “ACC” position. Vehicles with a smart key sys- tem: To stop the engine, press and hold the engine switch for 2 consecutive seconds or more, or press it briefly 3 times or Press and hold for 2 seconds or more in succession.
Page 411: If The Vehicle Is Trapped In Rising Water
However, an emergency hammer cannot shatter the windshield as it is lam- inated glass. : Contact your Toyota dealer or aftermarket accessory manufacturer for fur- ther information about an emergency hammer. ■ Escaping the vehicle from the window There are cases where escaping the vehicle from the window is not possi- ble due to seating position, passenger body type, etc.
Page 412: Steps To Take In An Emergency
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or commercial towing service, using a wheel-lift type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/ provincial and local laws.
Page 413 7-2. Steps to take in an emergency Towing with a sling-type truck Do not tow with a sling-type truck to prevent body damage. Towing with a wheel-lift type truck From the front From the rear   Release the parking brake. Use a towing dolly under the front wheels.
Page 414 7-2. Steps to take in an emergency Using a flatbed truck If your vehicle is transported by a flatbed truck, it should be tied down at the locations shown in the illustration. If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45.
Page 415 7-2. Steps to take in an emergency Emergency towing procedure Take out the towing eyelet. (P. 437) Remove the eyelet cover using a flathead screwdriver. To protect the bodywork, place a rag between the screwdriver and the vehicle body as shown in the illustration.
Page 416 7-2. Steps to take in an emergency Securely attach cables or chains to the towing eyelet. Take care not to damage the vehicle body. Vehicles without a smart key system: Enter the vehicle being towed and start the engine. If the engine does not start, turn the engine switch to the “ON” position. Vehicles with a smart key system: Enter the vehicle being towed and start the engine.
Page 417 7-2. Steps to take in an emergency WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When towing the vehicle Be sure to transport the vehicle with the front wheels raised or with all four wheels raised off the ground.
Page 418 7-2. Steps to take in an emergency NOTICE ■ To prevent damage to the vehicle when towing using a wheel-lift type truck ● Vehicles without a smart key system: Do not tow the vehicle from the rear when the engine switch is in the “LOCK” position or the key is removed. The steering lock mechanism is not strong enough to hold the front wheels straight.
Page 419: If You Think Something Is Wrong
7-2. Steps to take in an emergency If you think something is wrong If you notice any of the following symptoms, your vehicle proba- bly needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms ● Fluid leaks under the vehicle.
Page 420: Fuel Pump Shut Off System
7-2. Steps to take in an emergency Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 421: If A Warning Light Turns On Or A Warning Buzzer Sounds
If a light comes on or flashes, but then goes off, this does not necessarily indicate a malfunction in the system. However, if this continues to occur, have the vehicle inspected by your Toyota dealer. Warning light and warning buzzer list Warning light...
Page 422 Indicates a malfunction in: • The electronic engine control system; (U.S.A.) • The electronic throttle control system; or • The electronic continuously variable transmission.  Have the vehicle inspected by your Toyota dealer (Canada) immediately. SRS warning light Indicates a malfunction in: •...
Page 423 • The hill-start assist control system. The light will flash when the VSC or the TRAC is operat- ing. (P. 287)  Have the vehicle inspected by your Toyota dealer immediately. Brake system warning light Indicates a malfunction in the electric parking brake ...
Page 424 When the light comes on after blinking for 1 minute: Malfunction in the tire pressure warning system (P. 427)  Have the system checked by your Toyota dealer. High engine coolant temperature warning light (warning buzzer) Indicates that the engine coolant temperature is too high ...
Page 425  Release the accelerator pedal and depress the brake pedal. Indicates a malfunction in the Brake Override System (with warning buzzer)  Have the vehicle inspected by your Toyota dealer immediately. Drive-Start Control Indicates that the shift position was changed and Drive- Start Control was operated while depressing the accelera- tor pedal.
Page 426 If the fuel tank is empty, refuel the vehicle imme- diately. The malfunction indicator lamp will go off after several trips. If the malfunction indicator lamp does not go off, contact your Toyota dealer. ■ Front passenger detection sensor, seat belt reminder and warning buzzer ●...
Page 427 If the tire pressure warning light frequently comes on after blinking for 1 minute when the engine switch is turned to the “ON” position (vehicles without smart key system) or IGNITION ON mode (vehicles with smart key system), have it checked by your Toyota dealer. ■ Warning buzzer In some cases, the buzzer may not be heard because of noisy place or an audio sound.
Page 428 ■ If both the ABS and the brake system warning lights remain on Stop your vehicle in a safe place immediately and contact your Toyota dealer. The vehicle will become extremely unstable during braking, and the ABS system may fail, which could cause an accident resulting in death or serious injury.
Page 429 7-2. Steps to take in an emergency WARNING ■ Maintenance of the tires Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label).
Page 430 7-2. Steps to take in an emergency NOTICE ■ To ensure the tire pressure warning system operates properly Do not install tires with different specifications or makers, as the tire pressure warning system may not operate properly. C-HR_OM_USA_OM10634U...
Page 431: If A Warning Message Is Displayed
When a message is shown, perform the correction procedure appropriate to the message. Multi-information display If any of the warning messages are shown again after the following actions have been performed, contact your Toyota dealer. C-HR_OM_USA_OM10634U...
Page 432 Messages and warnings The warning lights and warning buzzers operate as follows depending on the content of the message. If a message indicates the need for inspection by a dealer, have the vehicle inspected by your Toyota dealer immediately. System...
Page 433 The warning messages explained below may differ from the actual messages according to operation conditions and vehicle specifications. ■ If a message that indicates the need for visiting your Toyota dealer is displayed The system or part shown on the multi-information display is malfunctioning.
Page 434 (P. 457). ● If the following messages are shown, there may be a malfunction. Immedi- ately stop the vehicle in a safe place and contact your Toyota dealer. Con- tinuing to drive the vehicle may be dangerous. • “Braking Power Low.”...
Page 435 If this message is displayed but you have not had a new electronic key regis- tered, ask your Toyota dealer to check if an unknown electronic key (other than those in your possession) has been registered.
Page 436: If You Have A Flat Tire
7-2. Steps to take in an emergency If you have a flat tire Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: P. 362 WARNING ■ If you have a flat tire Do not continue driving with a flat tire.
Page 437 7-2. Steps to take in an emergency Location of the spare tire, jack and tools Towing eyelet Jack handle Wheel nut wrench Spare tire Jack C-HR_OM_USA_OM10634U...
Page 438 7-2. Steps to take in an emergency WARNING ■ Using the tire jack Observe the following precautions. Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains.
Page 439 7-2. Steps to take in an emergency Taking out the jack Remove the deck board. (P. 316) Take out the jack. Taking out the spare tire Remove the deck board. (P. 316) Remove the cushion. Loosen the center fastener that secures the spare tire.
Page 440 7-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side In front of the front left-hand side tire...
Page 441 7-2. Steps to take in an emergency Assemble the jack handle and the wheel nut wrench as shown in the illustration. Raise the vehicle until the tire is slightly raised off the ground. Remove all the wheel nuts and the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid...
Page 442 • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. • When installing the wheel nuts, be sure to install them with the tapered ends facing inward.
Page 443 7-2. Steps to take in an emergency Installing the spare tire Remove any dirt or foreign mat- ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.
Page 444 7-2. Steps to take in an emergency Firmly tighten each wheel nut two or three times in the order shown in the illustration. Tightening torque: 76 ft · lbf (103 N · m, 10.5 kgf · m) Stow the flat tire, tire jack and all tools. ■...
Page 445 7-2. Steps to take in an emergency WARNING ■ When using the compact spare tire ● Remember that the compact spare tire provided is specifically designed for use with your vehicle. Do not use your compact spare tire on another vehicle. ●...
Page 446 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 447: If The Engine Will Not Start
7-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting proce- dures are being followed (P. 178, 181), consider each of the fol- lowing points: The engine will not start even though the starter motor operates normally.
Page 448 ● There may be a malfunction in the steering lock system. (vehicles with a smart key system) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function (vehicles with a smart key system)
Page 449: If The Electronic Key Does Not Operate Properly (Vehicles With A Smart Key System)
Unlocks the door Turning the key rearward unlocks the driver’s door. Turning the key once again within 3 seconds unlocks the other doors. Opens the windows (turn and hold) : These settings must be customized at your Toyota dealer. (P. 494) C-HR_OM_USA_OM10634U...
Page 450 ACCESSORY mode. Firmly depress the brake pedal and check that and mes- sages are shown on the multi-information display. Press the engine switch. In the event that the engine still cannot be started, contact your Toyota dealer. C-HR_OM_USA_OM10634U...
Page 451 7-2. Steps to take in an emergency ■ Stopping the engine Set the parking brake, shift the shift lever to P and press the engine switch as you normally do when stopping the engine. ■ Replacing the key battery As the above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery is depleted.
Page 452: If The Vehicle Battery Is Discharged
The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can also call your Toyota dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below.
Page 453 7-2. Steps to take in an emergency Connect the jumper cables according to the following procedure: Connect a positive jumper cable clamp to the positive (+) battery terminal on your vehicle. Connect the clamp on the other end of the positive cable to the positive (+) battery terminal on the second vehicle.
Page 454 To install the engine cover, conduct the removal procedure in reverse. After installing, check that the fixed pins are inserted securely. Once the engine starts, have the vehicle inspected at your Toyota dealer as soon as possible. ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting.
Page 455 • If the 20 hour rate capacity is low, even if the time period where the vehi- cle is not used is a short time, the battery may discharge and the engine may not be able to start. ● For details, consult your Toyota dealer. WARNING ■ Avoiding battery fires or explosions...
Page 456 7-2. Steps to take in an emergency NOTICE ■ When handling jumper cables When connecting the jumper cables, ensure that they do not become entan- gled in the cooling fan or engine drive belt. C-HR_OM_USA_OM10634U...
Page 457: If Your Vehicle Overheats
If you do not see steam: Carefully lift the hood. After the engine has cooled down sufficiently, inspect the hoses and radiator core (radia- tor) for any leaks. Radiator Cooling fan If a large amount of coolant leaks, immediately contact your Toyota dealer. C-HR_OM_USA_OM10634U...
Page 458 (The fan may not operate in freezing temperatures.) If the fan is not operating: Stop the engine immediately and contact your Toyota dealer. If the fan is operating: Have the vehicle inspected at the nearest Toyota dealer.
Page 459 7-2. Steps to take in an emergency WARNING ■ When inspecting under the hood of your vehicle Observe the following precautions. Failure to do so may result in serious injury such as burns. ● If steam is seen coming from under the hood, do not open the hood until the steam has subsided.
Page 460: If The Vehicle Becomes Stuck
7-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: Stop the engine. Shift the shift lever to P, and set the parking brake. Remove the mud, snow or sand from around the front wheels.
Page 461 7-2. Steps to take in an emergency WARNING ■ When attempting to free a stuck vehicle If you choose to push the vehicle back and forth to free it, make sure the surrounding area is clear to avoid striking other vehicles, objects or people. The vehicle may also lunge forward or lunge back suddenly as it becomes free.
Page 462 7-2. Steps to take in an emergency C-HR_OM_USA_OM10634U...
Page 463 Vehicle specifications 8-1. Specifications Maintenance data (fuel, oil level, etc.) ..464 Fuel information ....472 Tire information ....475 8-2. Customization Customizable features ..488 8-3. Items to initialize Items to initialize ....499 C-HR_OM_USA_OM10634U...
Page 464: Specifications
The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is also stamped on the top left of the instrument panel.
Page 465 8-1. Specifications This number is stamped under the right-hand front seat. This number is also on the Cer- tification Label. ■ Engine number The engine number is stamped on the engine block as shown. C-HR_OM_USA_OM10634U...
Page 466 8-1. Specifications Engine Model 3ZR-FAE Type 4-cylinder in line, 4-cycle, gasoline Bore and stroke 3.17  3.84 in. (80.5  97.6 mm) Displacement 121.3 cu.in. (1987 cm Valve clearance (engine Automatic adjustment cold) Drive belt tension Automatic adjustment Fuel Fuel type Unleaded gasoline only Octane rating 87 (Research Octane Number 91) or higher...
Page 467 8-1. Specifications Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: ILSAC GF-5 multigrade engine oil Recommended viscosity: SAE 0W-20...
Page 468 Cooling system Capacity 6.1 qt. (5.7 L, 5.1 Imp.qt.) Use either of the following. • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based non-sili- Coolant type cate, non-amine, non-nitrite, and non-borate cool- ant with long-life hybrid organic acid technology Do not use plain water alone.
Page 469 NOTICE ■ Continuously variable transmission fluid type Using continuously variable transmission fluid other than “Toyota Genuine CVT Fluid FE” may cause deterioration in shift quality, locking up of the transmission accompanied by vibration and, ultimately, damage to the vehi- cle’s transmission.
Page 470 8-1. Specifications Tires and wheels 17-inch tires  Tire size 215/60R17 96H Front tires: Tire inflation pressure 33 psi (230 kPa, 2.3 kgf/cm or bar) (Recommended cold tire Rear tires: inflation pressure) 33 psi (230 kPa, 2.3 kgf/cm or bar) Wheel size 17 ...
Page 471 8-1. Specifications Light bulbs Light bulbs Bulb No. Type Front side marker lights ― (bulb type) Front turn signal lights ― (bulb type) Side turn signal lights ― Exterior Rear side marker lights ― Rear turn signal lights ― Back-up lights License plate lights ―...
Page 472: Fuel Information
In very few cases, driveability problems may be caused by the brand of gaso- line you are using. If driveability problems persist, try changing the brand of gasoline. If this does not correct the problem, consult your Toyota dealer. ■...
Page 473 Non-recommendation of the use of gasoline containing MMT Some gasoline contains an octane enhancing additive called MMT (Methylcy- clopentadienyl Manganese Tricarbonyl). Toyota does not recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected.
Page 474 8-1. Specifications NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used, the engine will be damaged. ● Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle’s three-way catalytic converters causing the emission control system to malfunction.
Page 475: Tire Information
8-1. Specifications Tire information Typical tire symbols Full-size tire  Compact spare tire  C-HR_OM_USA_OM10634U...
Page 476 8-1. Specifications Tire size (P. 478) DOT and Tire Identification Number (TIN) (P. 477) Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Location of treadwear indicators (P. 362) Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire.
Page 477 8-1. Specifications Typical DOT and Tire Identification Number (TIN) Type A Type B   DOT symbol Tire Identification Number (TIN) Tire manufacturer’s identification mark Tire size code Manufacturer’s optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year Manufacturer’s code : The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards.
Page 478 8-1. Specifications Tire size Typical tire size information ■ The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 digits)
Page 479 8-1. Specifications Tire section names Bead Sidewall Shoulder Tread Belt Inner liner Reinforcing rubber Carcass Rim lines Bead wires Chafer C-HR_OM_USA_OM10634U...
Page 480 U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. DOT quality grades ■...
Page 481 8-1. Specifications Temperature A, B, C ■ The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissi- pate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
Page 482 8-1. Specifications Glossary of tire terminology Tire related term Meaning Tire pressure when the vehicle has been Cold tire inflation pres- parked for three hours or more, or has not sure been driven more than 1 mile or 1.5 km under that condition The maximum cold inflated pressure to which Maximum...
Page 483 8-1. Specifications Tire related term Meaning The combined weight of installed regular pro- duction options weighing over 5 lb. (2.3 kg) in excess of the standard items which they Production options replace, not previously considered in curb weight weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim A metal support for a tire or a tire and tube...
Page 484 8-1. Specifications Tire related term Meaning A pneumatic tire in which the ply cords that extend to the beads are laid at alternate Bias ply tire angles substantially less than 90 degrees to the centerline of the tread The tire structure, except tread and sidewall Carcass rubber which, when inflated, bears the load The breaking away of pieces of the tread or...
Page 485 8-1. Specifications Tire related term Meaning A tire designated by its manufacturer as pri- Light truck (LT) tire marily intended for use on lightweight trucks or multipurpose passenger vehicles The maximum load that a tire is rated to carry Load rating for a given inflation pressure The load rating for a tire at the maximum per- Maximum load rating...
Page 486 8-1. Specifications Tire related term Meaning The linear distance between the exteriors of the sidewalls of an inflated tire, excluding ele- Section width vations due to labeling, decoration, or protec- tive bands That portion of a tire between the tread and Sidewall bead The parting of the rubber compound from the...
Page 487 8-1. Specifications Designated seating Occupant distribution Vehicle normal load, capacity, Number of in a normally loaded Number of occupants occupants vehicle 2 through 4 2 in front 2 in front, 1 in second 5 through 10 seat 2 in front, 1 in second 11 through 15 seat, 1 in third seat, 1 in fourth seat...
Page 488: Customization
Your vehicle includes a variety of electronic features that can be personalized to suit your preferences. The settings of these fea- tures can be changed using the multi-information display or at your Toyota dealer. Customizing vehicle features Changing using the multi-information display ■...
Page 489 Customizable features Some function settings are changed simultaneously with other func- tions when customized. Contact your Toyota dealer for further details. Settings that can be changed using the multi-information display Settings that can be changed on the audio system screen Settings that can be changed by your Toyota dealer Definition of symbols: O = Available, —...
Page 490 8-2. Customization Gauges, meters and multi-information display (P. 94, 97) ■ Customized Function Default setting setting Spanish English O — Language French km (km/L) miles (MPG, US) km (L/100 km) O — Units miles (MPG) °F °C O — Eco Driving Indicator O —...
Page 491 8-2. Customization Instrument cluster (P. 96) ■ Customized Function Default setting setting Sensor sensitivity for darkening the bright- ness of the instrument Standard -2 to 2 — — O cluster depending on the outside brightness Sensor sensitivity for returning the bright- ness of the instrument Standard -2 to 2...
Page 492 8-2. Customization Smart key system and wireless remote control (P. 118, 131) ■ Customized Function Default setting setting Operation signal — O (buzzer) 1 to 7 Operation signal — O (emergency flashers) Driver’s door unlocked in one All doors unlocked Unlocking operation step, all doors —...
Page 493 8-2. Customization Smart key system (P. 131) ■ Customized Function Default setting setting Smart key system — O Smart door unlocking Driver’s door All the doors — O Number of consecu- As many as tive door lock opera- 2 times —...
Page 494 8-2. Customization Power windows (P. 155) ■ Customized Function Default setting setting or mechanical linked operation — — O (open) or mechanical linked operation — — O (close) Wireless remote con- trol linked operation — — O (open only) or mechanical wireless remote control linked —...
Page 495 8-2. Customization Automatic light control system (P. 202) ■ Customized Function Default setting setting Light sensor sensitiv- Level 0 Level -2 to 2 — O Time elapsed before headlights automati- 30 seconds 60 seconds — O cally turn off after doors are closed 90 seconds Daytime running lights...
Page 496 8-2. Customization BSM (Blind Spot Monitor) (P. 269) ■ Customized Function Default setting setting BSM (Blind Spot Mon- O — — itor) Outside rear view mir- ror indicator bright- Bright O — — ness Early Alert timing for pres- Late ence of approaching Intermediate O —...
Page 497 8-2. Customization Illumination (P. 308) ■ Customized Function Default setting setting Time elapsed before the interior lights turn 15 seconds 7.5 seconds — O 30 seconds Operation after the engine switch — — O turned off Operation when the — — O doors are unlocked Operation when you approach the vehicle...
Page 498 8-2. Customization ■ In the following situations, customize mode in which the settings can be changed through the multi-information display will automatically be turned off ● A warning message appears after the customize mode screen is displayed. ● The engine switch is turned off. ●...
Page 499: Items To Initialize
8-3. Items to initialize Items to initialize The following items must be initialized for normal system opera- tion after such cases as the battery being reconnected, or main- tenance being performed on the vehicle: Item When to initialize Reference Power window When functioning abnormally P.
Page 500 8-3. Items to initialize C-HR_OM_USA_OM10634U...
Page 501 For owners Reporting safety defects for U.S. owners......502 Seat belt instructions for Canadian owners (in French) ....... 503 SRS airbag instructions for Canadian owners (in French) ....... 505 C-HR_OM_USA_OM10634U...
Page 502: Reporting Safety Defects For U.s. Owners
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investiga- tion, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 503: Seat Belt Instructions For Canadian Owners (In French)
Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintures de sécurité...
Page 504 AVERTISSEMENT ■ État et usure des ceintures de sécurité Inspectez les ceintures de sécurité périodiquement. Contrôlez qu’elles ne sont pas entaillées, effilochées, et que leurs ancrages ne sont pas desser- rés. Ne pas utiliser une ceinture de sécurité défectueuse avant qu’elle ne soit remplacée.
Page 505: Srs Airbag Instructions For Canadian Owners (In French)
SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English. C-HR_OM_USA_OM10634U...
Page 506 ◆ Coussins gonflables SRS frontaux Coussin gonflable SRS conducteur/passager avant Participent à la protection de la tête et du thorax du conducteur et du passager avant contre les chocs avec les éléments de l’habitacle Coussin gonflable SRS de genoux pour le conducteur Participe à...
Page 507 Composition du système de coussins gonflables SRS C-HR_OM_USA_OM10634U...
Page 508 Capteurs d’impact avant Capteur de position du siège conducteur Coussin gonflable passager avant Coussin gonflable conducteur Témoins indicateurs “AIR Coussin gonflable de genoux BAG ON” et “AIR BAG OFF” conducteur Capteurs d’impact latéral Témoin d’alerte SRS (avant) Boîtier électronique Capteurs d’impact latéral coussins gonflables...
Page 509 AVERTISSEMENT ■ Précautions avec les coussins gonflables SRS Respectez les précautions suivantes concernant les coussins gonflables SRS. À défaut, des blessures graves, voire mortelles, pourraient s’ensuivre. ● Le conducteur et tous les passagers à bord du véhicule doivent porter leur ceinture de sécurité...
Page 510 Installez dans un siège de sécurité enfant les enfants trop jeunes pour pouvoir utiliser la ceinture de sécurité. Toyota recommande vivement que tous les nourrissons et enfants soient installés dans les sièges arrière du véhicule et convenablement attachés.
Page 511 AVERTISSEMENT ■ Précautions avec les coussins gonflables SRS ● Ne pas s’asseoir sur le bord du siège et ne pas s’appuyer contre la planche de bord. ● Ne pas laisser un enfant rester debout devant coussin gonflable passager avant ni assis sur les genoux du passager avant.
Page 512 AVERTISSEMENT ■ Précautions avec les coussins gonflables SRS ● Ne rien fixer ou disposer sur la planche de bord, la garniture centrale du moyeu de volant de direction et la partie inférieure du tableau de bord. déploiement coussins gonflables SRS conducteur, passager avant et genoux pour le conducteur, tout objet risque de se transformer en projectile.
Page 513 Si les parties renfermant les coussins gonflables SRS, telles que la garniture centrale du volant de direction et les garnitures de montants avant et arrière, apparaissent abîmées ou craquelées, faites-les remplacer par votre concessionnaire Toyota. ● Ne rien poser sur le siège du passager avant, comme un coussin par exemple.
Page 514 SRS Ne mettez pas à la casse votre véhicule et ne lui apportez aucune des modifications suivantes sans consulter votre concessionnaire Toyota. Les coussins gonflables SRS peuvent ne pas fonctionner correctement ou se déployer (se gonfler) accidentellement, provoquant ainsi des blessures graves, voire mortelles.
Page 515: Index
Index What to do if... (Troubleshooting) ....516 Alphabetical index ..... 520 Refer to “MULTIMEDIA OWNER’S MANUAL” for information regarding the equipment listed below. • Hands-free system (for cellular phone) • Rear view monitor system • Audio system • Connected services C-HR_OM_USA_OM10634U...
Page 516 You lose your keys ● If you lose your keys or mechanical keys, new genuine keys or mechanical keys can be made by your Toyota dealer. (P. 112) ● If you lose your keys or electronic keys, the risk of vehicle theft increases significantly.
Page 517 What to do if... (Troubleshooting) If you think something is wrong The engine does not start (vehicles without a smart key sys- tem) ● Is the shift lever in P? (P. 178) ● Is the steering wheel unlocked? (P. 179) ●...
Page 518 What to do if... (Troubleshooting) The steering wheel cannot be turned after the engine is stopped ● Vehicles without a smart key system: It is locked to prevent theft of the vehicle if the key is pulled from the engine switch.
Page 519 What to do if... (Troubleshooting) A warning buzzer sounds when leaving the vehicle (vehicles with a smart key system) ● Is the electronic key left inside the vehicle? Check the message on the multi-information display. (P. 431) A warning light turns on or a warning message is displayed ●...
Page 520: Alphabetical Index
Alphabetical index Alphabetical index Anchor brackets ......57 Anti-lock Brake System A/C ..........298 (ABS) ........286 Air conditioning filter ..... 379 Warning light......422 Assist grips......323 (Anti-lock Brake System)..286 Audio input Warning light......422 Audio remote control switches Audio system (Active Cornering Assist) ..
Page 521 Alphabetical index Brake assist ......286 Brake Hold ....... 199 Back door ......... 125 Break-in tips ......165 Back-up lights Brightness control Replacing light bulb ....398 Instrument panel Wattage ........ 471 light control......96 Battery ........355 BSM (Blind Spot Monitor) ..269 Checking.......
Page 522 Alphabetical index Child safety ........ 54 Airbag precautions....35 Care........326, 330 Battery precautions..358, 455 Aluminum wheels....327 Child restraint system ..... 55 Exterior ......... 326 How your child should wear Interior........330 the seat belt......28 Seat belts......331 Installing child restraints ..
Page 523 Alphabetical index Doors Back door ......125 Daytime running light Door lock ....... 118,125 system........204 Door windows ....... 155 Deck board ....... 316 Open door warning Defogger buzzer ......123, 126 Outside rear view Outside rear view mirrors ..152 mirrors ........
Page 524 Alphabetical index Emergency flashers ....408 Engine ........466 Eco Driving Indicator ....93 ACCESSORY mode ..... 182 Electric Power Steering Compartment......347 (EPS)........287 Engine switch ....178, 181 Warning light......422 Hood ........344 Electronic key ......110 How to start the Battery-saving function ..
Page 525 Alphabetical index Flat tire........436 Gauges ........94 Floor mats ........22 Glove box ......... 312 Fluid Grocery bag hooks....315 Brake ........469 Continuously variable transmission ....... 469 Hands-free system Washer ......... 359 (for cellular phone) Fog lights Head restraints ......145 Replacing light bulbs.....
Page 526 Alphabetical index I/M test ........340 Jack Identification ......464 Positioning the jack....346 Engine........465 Vehicle-equipped jack ..437 Vehicle ........464 Jack handle......437 Ignition switch Jam protection function (engine switch) ....178, 181 Power window ...... 156 Illuminated entry system ..
Page 527 Alphabetical index Lane Departure Alert (LDA) ..242 Maintenance Language........100 Do-it-yourself maintenance... 341 LDA (Lane Departure Alert) ..242 General maintenance ... 336 LATCH anchors ......67 Maintenance data ....464 Lever Maintenance Auxiliary catch lever....344 requirements ...... 333 Hood lock Reset the maintenance release lever.......
Page 528 Alphabetical index Noise from under vehicle.... 6 Parking brake......194 Operation...... 194, 195 Parking brake engaged warning buzzer/message ... 197 Odometer........94 Warning light......423 Parking lights......202 Engine oil ......466 Light switch......202 Opener Replacing light bulbs .... 403 Back door......
Page 529 Alphabetical index Replacing Electronic key battery ... 383 Radiator ........352 Fuses........387 Radio Light bulbs ......393 RCTA (Rear Cross Traffic Tires........436 Alert)........278 Wireless remote control Rear Cross Traffic Alert ..278 battery ........ 383 Rear interior light..... 309 Reporting safety defects Rear seat for U.S.
Page 530 Alphabetical index Sensor Automatic headlight Safety Connect ......74 system........ 204 Seat belt reminder light... 424 Automatic High Beam Seat belts........26 system........ 207 Adjusting the seat belt .... 27 LDA (Lane Departure Automatic Locking Alert)........242 Retractor (ALR) ....28 PCS (Pre-Collision Child restraint system system).......
Page 531 Alphabetical index Snow tires ........ 292 Switches Spare tire ........436 Audio remote control Inflation pressure ....470 switches Storage location....437 Automatic High Beam Spark plug ........ 468 switch ......... 207 Specifications ......464 Brake hold switch ....199 Speedometer......
Page 532 Talk switch Towing eyelet ....... 415 Telephone switches Trailer towing ......176 Theft deterrent system Toyota Safety Sense P.... 222 Engine immobilizer system ..81 Automatic High Beam... 207 Tire inflation pressure..... 372 LDA (Lane Departure Maintenance data ....470 Alert)........
Page 533 Alphabetical index USB memory Warning buzzers USB port Blind Spot Monitor (BSM) ..269 Brake system......421 Downshifting ......190 Electric power steering ..422 Vanity lights ......321 Engine coolant Wattage ........ 471 temperature......424 Vanity mirrors ......321 Engine oil pressure....
Page 534 Alphabetical index Warning lights......87 Warning messages....431 ABS........422 Washer ......213, 216 Brake hold operated Checking....... 359 indicator......423 Preparing and checking Brake Override System..425 before winter ...... 292 Brake system ....421, 423 Switch ......213, 216 Charging system....
Page 535 Alphabetical index C-HR_OM_USA_OM10634U...
Page 536 GAS STATION INFORMATION Fuel filler Auxiliary catch lever Fuel filler door door opener P. 344 P. 220 P. 220 Hood lock release Tire inflation pres- lever sure P. 470 P. 344 Fuel tank capacity 13.2 gal. (50 L, 11.0 Imp.gal.) (Reference) Fuel type Unleaded gasoline only...

Toyota C-HR 2020 Manual

Quick Links

Related Manuals for Toyota C-HR 2020

Summary of Contents for Toyota C-HR 2020

Table of Contents