Toyota C-HR Owner's Manual page 194

Stopping the hybrid system
1
Stop the vehicle completely.
2 Set the parking brake (P. 208), and shift the shift lever to P.
3
Press the power switch.
The hybrid system will stop.
4
Release the brake pedal and check that "ACCESSORY" on the
multi-information display is off.
Changing power switch modes
Modes can be changed by pressing the power switch with brake pedal
released. (The mode changes each time the switch is pressed.)
*
Off
The emergency flashers can be
used.
The multi-information display will
not be displayed.
ACCESSORY mode
Some electrical components such
as the audio system can be used.
"ACCESSORY" will be displayed
on the multi-information display.
ON mode
All electrical components can be
used.
"IGNITION ON" will be displayed on the multi-information display.
*
: If the shift lever is in a position other than P when turning off the hybrid sys-
tem, the power switch will be turned to ACCESSORY mode, not to off.
C-HR_HV_OM_General_OM10653E
4-2. Driving procedures
ACCESSORY
IGNITION ON
193
4