Toyota C-HR Owner's Manual page 245

244
4-5. Using the driving support systems
Buzzer operation and distance to an object
■
A buzzer sounds when the sensors are operating.
● The buzzer beeps faster as the vehicle approaches an object.
When the vehicle comes within approximately 30 cm (1.0 ft.) of
the object, the buzzer sounds continuously.
● When 2 or more objects are detected simultaneously, the buzzer
sounds for the nearest object. If one or more objects come within
approximately 30 cm (1.0 ft.) of the vehicle, the buzzer will repeat
a long tone, followed by fast beeps.
● Automatic buzzer mute function: After a buzzer begins sounding,
if the distance between the vehicle and the detected object does
not become shorter, the buzzer will be muted automatically.
(However, if the distance between the vehicle and object is
30 cm (1.0 ft.) or less, this function will not operate.)
■ Adjusting the buzzer volume
The buzzer volume can be adjusted on the multi-information dis-
play.
Use the meter control switches to change settings. (P. 120)
1
Press "" or "" to select
2
Press "" or "" to select "Vehicle Settings", and then press
3
Press "" or "" to select
press
Each time the switch is pressed, the volume level will change between
1, 2 and 3.
C-HR_HV_OM_General_OM10653E
.
.
, select the volume and then
.