Safety Information; Product Use; Specifications; Routine Maintenance - Fluke Calibration 9500B Calibration Manual

9500B
Calibration Manual
To see product information and download the latest manual supplements, visit Fluke
Calibration Calibration's website at www.flukecal.com.
To register your product, visit

Safety Information

General Safety Information is located in the printed Safety Information document that
ships with the Product. It can also be found online at www.flukecal.com. More specific
safety information is listed where applicable.

Product Use

User instructions for Product operation are located in these manuals at
www.flukecal.com:
•
•

Specifications

Safety Specifications are located in the Safety Specifications section of the 9500B Safety
Sheet. Complete specifications are at www.flukecal.com. See the 9500B Extended
Specifications.

Routine Maintenance

General Cleaning

To prevent fire, explosion, or personal injury, disconnect the
power line cord before cleaning.
Remove dust from the top cover using a soft brush (do not use a cloth unless it is
lint-free). Keep the controls clean using a soft, lint-free cloth, dampened with a non-toxic,
noncorrosive detergent. The display screen should be cleaned using a soft, lint-free cloth,
dampened with an anti-static cleanser. Avoid extreme pressure on the face of the screen
and do not spray the screen directly.

Air Intake Filter

To prevent fire, explosion, or personal injury, disconnect the
power line cord before removing any covers.
The internal airflow is powered by an axial fan which draws cooling air through the
interior (directed mainly through the RF module) to be exhausted on the left side via
holes in the cover. Replacement air is drawn into the instrument through holes in the right
side of the top cover, then through a 20 ppi (pores per inch) reticulated filter. This filter is
accessed by removing the top cover.
2
9500B Operators Manual
9500B Users Guide
http://flukecal.com/register-product.
W Warning
W Warning