Keyboard Checks - Fluke Calibration 9500B Calibration Manual

The result of the whole Memory test is reported once testing is complete:
If a failure is reported, rectification will require access to the internal circuitry, so no
further user action is recommended, except to report the result to your Fluke Calibration
Service Center.
EXIT returns to the Interface 'Select test' menu screen.

Keyboard Checks

Keyboard checks are initiated by pressing the KEYBOARD key on the 'Select test' menu
screen:
High Performance Oscilloscope Calibrator
Model 9500B Test and Selftest
erw18s
erw183
erw184
15