Safety Requirements - quadient iX-3 Series User Manual
Hide thumbs
Also See for iX-3 Series:
- User manual (296 pages) ,
- Quick installation manual (2 pages) ,
- Product replacement manual (2 pages)
Table of Contents
Advertisement
1.1
Safety Requirements
Power Connection
Before connecting, check whether the Mailing System is suitable for the local AC power
voltage (110V - 60Hz).
THIS SYSTEM MUST BE GROUNDED
• Only connect the power plug to an outlet provided with a protective ground
contact.
• To reduce the risk of fire, use only the power cord supplied with the mailing
system.
• Do not use ground adaptors.
• Do not use this product on a wet floor or near water.
• In case of liquid spillage, disconnect the power cord from the outlet and proceed
with cleaning.
• Use an outlet located near the system that is easily accessible. Do not route the
power cord between pieces of furniture or over sharp edges.
• Avoid using outlets controlled by wall switches or shared by other equipment.
• Make sure there is no strain on the power supply cord.
Compliance
Energy Star® Compliance
Your mailing system is Energy Star® compliant, meaning that it will help to save energy
and money while protecting the environment.
1
3
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the iX-3 Series and is the answer not in the manual?
Questions and answers
How do you change postage amount
To change the postage amount on a Quadient iX-3 Series machine, follow these steps:
1. On the [Normal] home screen, type the first figure of the amount using the keypad.
2. The Manual amount entry screen will appear.
3. Complete the amount.
4. Press [OK].
5. The new amount will be displayed in the Postage area of the home screen.
This answer is automatically generated
how to make a label for a corrected amount of postage
To create a label for a corrected amount of postage on the Quadient iX-3 Series, follow these steps:
1. Ensure you are on the home screen of the [Amount Correction] stamp type. The home screen displays the date and amount.
2. If needed, change the type of stamp to [Amount Correction]:
- Press to access the Customize Stamp screen.
- Select Stamp Type and then choose [Amount Correction].
- Confirm by pressing [OK].
3. Select the amount and enter the desired corrected postage amount.
4. Press [OK] to validate the entry.
5. If necessary, correct the date:
- Select Date and choose the correct date option.
- Press [OK] to confirm.
6. Insert the mail piece into the mail path with the side to be printed facing upwards.
7. The mailing system applies the imprint, and the mail piece is sent to the catch tray.
If printing on a label instead of directly on an envelope, place the label on the address side of the envelope in the lower-left corner.
This answer is automatically generated
When running the envelope through the machine is only printing the bottom half of the postage information. How do I fix that?
how do you order new ink cartridges
HOW CAN I DO A MANUAL POSTAGE AMOUNT FOR POSTAGE RETURND DUE
To manually set the postage amount for postage due on the Quadient iX-3 Series, follow these steps:
1. Ensure you are on the home screen of the [Normal] type of imprint. The screen should display weight, postage, and the currently selected rate.
2. Check or change the type of imprint by accessing the Imprint screen.
3. Set the additional postage amount instead of 0.
4. Print the new postage on the back of the envelope.
These steps correct the postage amount for already processed mail.
This answer is automatically generated
When trying to print the stamp details on the envelope it is only printing the top of the information. How do i fix this
how to change the rate to 0.73
To change the rate on the Quadient iX-3 Series:
1. Press the Rate Selection button.
2. Use the keypad to enter 0.73 or select the appropriate rate from the options.
3. Confirm the selection by pressing OK.
The new rate should now be applied.
This answer is automatically generated
I **** trying to put postage on a certified mail from a quadient 1x-3 series mail machine. I followed all the steps, but can't get it to print the postage after I push the green button
how do i change new rate on the machine
To change the rate on the Quadient iX-3 Series machine:
1. Press the appropriate key to open the Rate Selection screen.
2. On the Rate Selection screen, you can:
- Type a rate number to select a specific rate or view rate options.
- Press numeric key 4 to display the most common Inland rates.
3. Follow the on-screen instructions to choose the rate and services.
4. Press [OK] to confirm your selection.
Note: Postage will display as zero until the weight is known.
This answer is automatically generated
Do you have a list of all the international country codes? i.e. Canada is 1, Mexico is 2 etc. This would be extremely helpful as I am trying to compile a cheat sheet that list all these codes for quick reference.