Moistener - quadient iX-3 Series User Manual

12.2

Moistener

Moistener Overview
A Sealing Moistener:
• Is used to moisten the glue on the envelope and seal the flap closed.
• Consists of the brush assembly, sponge assembly, and water reservoir
• all of which are used to moisten the glue on the envelope flaps.
• Uses an envelope flap separation blade to open the envelope flap slightly.
Sealing Moistener Maintenance:
• Keep fresh water in the water reservoir.
• Clean the Brush Assembly weekly with fresh water.
• Rinse out the sponge with fresh water weekly.
• Replace the brush assembly when the moistener is not moistening properly.
• Replace the sponge when it begins to break down and not soak up water properly.
Hand-Feed Table Moistener
Hand-Feed Table Moistener
12
211