quadient iX-5 Series Quick Installation Manual

iX-5 Series Base
Quick Installation Guide
Machine components:
Automatic
feeder cable k
Automatic
feeder
1 1
Unpack all components from the box, remove packaging
and any transit tape.
5
Lift machine slightly on the left hand side and align the hooks to attach the automatic feeder
– attach the catch tray (c) to the right hand side of the machine.
9
Installation Process
1 LAN
OK
Select LAN and press to test connection type.
For more help with your installation, please visit:
Machine Base
Catch Tray
Back of the machine
2
Lift the cover of the machine to reveal the
ink cartridge (i) and meter (j) locations.
6
(b) Attach the weighing platform
shelf (if applicable)
11
10
www.myquadient.co.uk
Registration PIN
Follow the steps on screen to complete the
Obtain registration PIN from MyQuadient.
procedure
Shelf
Weighing Platform
3
Place the meter (j) into the meter bay and slide in until it fits securely
into position.
7
(e) and Connect the weighing platform connector
cable (k) at the back of the machine. Then connect the LAN cable
(d).
(g) and power cable
Installation Process
Press the 'Next' to start the
Online service
declaration.
Next
kb.quadient.co.uk/ix5_install
LAN Cable Power Cable
Weighing Platform
Cable
4
Insert the ink cartridge (i)
and 'LOCK' stickers facing upwards. Push the ink cartridge
the back of the machine until you hear a 'click' - close the cover of the
machine.
8
k
(f) and automatic feeder Turn on the machine using the switch behind the
power cable
(h) to either side of the machine.
For more information or if you experience any
issues, please visit :
Ink Cartridge Meter
at an angle into the machine with the 'TOP'
(i) towards
(h) and follow the steps on screen.
kb.quadient.co.uk/ix5