Cable Routing - Dell EMC PowerEdge R240 Installation And Service Manual
Hide thumbs
Also See for PowerEdge R240:
- Manual (51 pages) ,
- Installation and service manual (127 pages) ,
- Getting started manual (2 pages)
Table of Contents
Advertisement
Next steps
1. Connect the following cables to the backplane:
a. Backplane signal cable
b. Backplane power cable
c. PERC cable
2. Replace the drives.
3. Follow the procedure listed in the
Cable routing
Figure 63. Cable routing - 4 x 3.5-inch drive backplane with PERC
Figure 64. Cable routing - 4 x 3.5-inch drive backplane with SATA
After working inside your
system.
Installing and removing system components
65
Advertisement
Table of Contents
