Service and troubleshooting
January 2021
Related information
Electrical installation
5.3.6
Monitoring the control unit readings
Menu
Table 5-1: Control Unit Readings
Category
Parameter
Answers
D800
PV
D801
SV
D802
TV
D803
FV
D804
Ullage
D805
% Current
Output
D806
Current O/P
Rate of change D809
Rate of Change This indicates the calculated rate of change of the
142
MONITOR → [CONTROLLER] → READINGS
Description
(1)
This is the live control unit Primary/Process Value
(PV).
(1)
This is the live control unit Secondary Value (SV).
(1)
This is the live control unit Third/Tertiary Value
(TV).
(1)
This is the live control unit Fourth Value (FV).
This indicates how much a vessel or open-channel
falls short of being full. It is calculated as the
difference between the upper range value (URV)
of the Current Output and the control unit PV i.e.
D804 = (P401 - D800).
This indicates the present amount of electrical
current being output from the 4–20 mA Current
Output as a percentage.
Note
The output current is while the control unit is in
the Program operating mode.
This indicates the present amount of electrical
current being output from the 4–20 mA Current
Output as a mA value.
control unit PV. See also
relay
for how to use parameter D809.
Rate of change mode
Reference Manual
00809-0100-4841
MENU
ANSWERS → PV
ANSWERS → SV
ANSWERS → TV
ANSWERS → FV
ANSWERS → Ullage
ANSWERS → % Current
Out
ANSWERS → Current
Output
Rate of Change
Emerson.com/Rosemount