Emerson Rosemount 3490 Series Reference Manual page 50

Getting started
January 2021
4.3.2 Menu navigation basics
In this section and throughout this manual, a simple notation has been used to guide you
to a particular menu screen or parameter screen. This avoids the need for detailed
navigation instructions.
Consider the navigation instructions to be followed before arriving at the ADVANCED
menu. For the purpose of this example, the starting point is the Full PV Display.
In the notation form, this is simply:
1. Navigate to MAIN MENU → ADVANCED.
Without the notation, this translates into these instructions:
1. Press the red (enter) button to display the MAIN MENU screen.
2. Press the down arrow button three times until ADVANCED is highlighted and
3. Select the red (enter) button once.
If square brackets are used in the notation, e.g. MAIN MENU → SETUP → [CONTROL
UNIT], it indicates that the bracketed menu does not appear in all circumstances.
When no HART transmitters are used, the SELECT INSTRUMENT screen does not appear. As
there is no need to select the control unit menu or a HART transmitter (Tx1 or Tx2) menu,
the menus that appear after selecting MAIN MENU → SETUP are purely for the control
unit.
50
blinking.
Figure 4-5: Navigating to ADVANCED Menu
MAIN MENU
Run App?
MONITOR
ADVANCED
Pxxx
Dxxx
ADVANCED
Reference Manual
00809-0100-4841
Emerson.com/Rosemount