Emerson Rosemount 3490 Series Reference Manual page 87

Reference Manual
00809-0100-4841
Data logging screens
Figure 4-19: Menu Map for LOGGING Screens
Log Interval
Esc =Quit
Low Mem Alarm
Esc =Quit
Starting, stopping and resetting the logger
Prerequisites
Changing the logging interval from 0 to a logging interval in minutes will clear all data
logged (i.e. clear the 7000 event-memory plus the 60 midnight totals).
Changing the log interval from a non-zero interval (e.g. 15 minutes) to a new non-zero
interval (e.g. five minutes) will clear the 7000 event-memory).
Procedure
1. Navigate to SETUP → [CONTROLLER] → LOGGING → Log Interval.
Emerson.com/Rosemount
P590
0 min
=Edit
Logging Wizard
Log Interval
Fast Log
Fast Log
Data Overwrite
Low Mem Alarm
P593
0 %
=Edit
MAIN MENU
SETUP
Run App?
MONITOR
SELECT INSTRUMENT
Controller: ****
Tx1: ****
The SELECT INSTRUMENT menu does not appear unless a HART transmitter is
connected.
Fast Log
0.0000 m
Esc =Quit
LOGGING
LOGGING
Data Overwrite
Esc =Quit
SETUP
DISPLAY
OUTPUT
LOGGING
Logging Wizard
Log Interval
Fast Log
Getting started
January 2021
P591
=Edit
P592
On
=Edit
LOGGING
Log Interval P590
0 min
Esc =Quit =Edit
87